Remove the unnecessary WMI vdev down operation as firmware internally does so already as part of WMI vdev restart. Repeated vdev down results in a firmware crash during channel switch operation when multiple BSSID advertisements are enabled: ath12k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 5 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 5 ath12k_pci 0000:06:00.0: failed to restart vdev 5: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 4 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 4 ath12k_pci 0000:06:00.0: failed to restart vdev 4: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath12k/mac.c | 29 +++------------------------ 1 file changed, 3 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index af5851373bcc..69ea2e98910a 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -6741,9 +6741,10 @@ ath12k_mac_update_vif_chan(struct ath12k *ar, lockdep_assert_held(&ar->conf_mutex); for (i = 0; i < n_vifs; i++) { - arvif = ath12k_vif_to_arvif(vifs[i].vif); + vif = vifs[i].vif; + arvif = ath12k_vif_to_arvif(vif); - if (vifs[i].vif->type == NL80211_IFTYPE_MONITOR) + if (vif->type == NL80211_IFTYPE_MONITOR) monitor_vif = true; ath12k_dbg(ab, ATH12K_DBG_MAC, @@ -6754,30 +6755,6 @@ ath12k_mac_update_vif_chan(struct ath12k *ar, vifs[i].old_ctx->def.width, vifs[i].new_ctx->def.width); - if (WARN_ON(!arvif->is_started)) - continue; - - if (WARN_ON(!arvif->is_up)) - continue; - - ret = ath12k_wmi_vdev_down(ar, arvif->vdev_id); - if (ret) { - ath12k_warn(ab, "failed to down vdev %d: %d\n", - arvif->vdev_id, ret); - continue; - } - } - - /* All relevant vdevs are downed and associated channel resources - * should be available for the channel switch now. - */ - - /* TODO: Update ar->rx_channel */ - - for (i = 0; i < n_vifs; i++) { - vif = vifs[i].vif; - arvif = ath12k_vif_to_arvif(vif); - if (WARN_ON(!arvif->is_started)) continue; -- 2.39.0