On Mon, 2008-12-01 at 18:10 +0800, Helmut Schaa wrote: > That only happens while associated. Scanning while not associated > works like > a charm. > > Here are some more informations: > If I load the unmodified module with debug=0x3FFF I get the following > log > when triggering a scan while associated: > > ipw2200: U ipw_wx_set_scan Start scan > 00000000 03 00 00 00 0D 24 28 2C 30 34 38 3C 40 95 99 9D .....$(, > 048<@... > 00000010 A1 A5 4A 02 03 04 05 06 07 08 09 0A 0B 00 00 > 00 ..J..... ........ > 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 ........ ........ > 00000030 00 00 00 00 00 00 00 00 00 00 03 33 31 11 13 > 33 ........ ...31..3 > 00000040 33 03 33 33 33 33 30 00 00 00 00 00 00 00 00 00 > 3.33330. ........ > 00000050 00 00 00 00 00 00 00 00 78 00 14 00 14 00 14 00 ........ > x....... > martian source 255.255.255.255 from 149.44.170.156, on dev eth1 > ll header: ff:ff:ff:ff:ff:ff:00:19:99:28:58:5b:08:00 > ipw2200: I ipw_rx_notification type = 12 (46 bytes) > ipw2200: I ipw_rx_notification Scan result for channel 36 > ipw2200: I ipw_rx_notification type = 12 (46 bytes) > ipw2200: I ipw_rx_notification Scan result for channel 40 > ipw2200: I ipw_rx_notification type = 12 (46 bytes) > ipw2200: I ipw_rx_notification Scan result for channel 44 > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 12 (46 bytes) > ipw2200: I ipw_rx_notification Scan result for channel 48 > > The channels 36-48 are active 11a channels. The next channel would be > 52 which > is a passive channel. > > martian source 255.255.255.255 from 149.44.170.66, on dev eth1 > ll header: ff:ff:ff:ff:ff:ff:00:0e:0c:aa:5c:c5:08:00 > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 25 (4 bytes) > ipw2200: I ipw_rx_notification type = 17 (8 bytes) > ipw2200: I ipw_handle_missed_beacon Aborting scan with missed beacon. > ipw2200: I ipw_handle_missed_beacon Missed beacon: 1 > > Aha, the firmware noticed a beacon miss before the scan watchdog > restarts the firmware (the log is without timestamps, sorry). > > ipw2200: I ipw_rx_notification type = 13 (4 bytes) > ipw2200: I ipw_rx_notification Scan completed: type 1, 5 channels, 2 > status > > Status 2 -> Scan aborted. We will look at this. Thanks, -yi -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
