Fix all of the kernel-doc issues in nl80211.h.
Signed-off-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
---
include/uapi/linux/nl80211.h | 68 ++++++++++++++++++++++++++------------------
1 file changed, 40 insertions(+), 28 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 4de84fbfd4fa..f917bc6c9b6f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -413,8 +413,8 @@
* are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
* do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
* %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
@@ -451,11 +451,6 @@
* %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
* @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
* %NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- * interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all mesh paths, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
* @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
* %NL80211_ATTR_IFINDEX.
*
@@ -1120,7 +1115,7 @@
* current configuration is not changed. If it is present but
* set to zero, the configuration is changed to don't-care
* (i.e. the device can decide what to do).
- * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
* %NL80211_ATTR_COOKIE.
*
@@ -1862,12 +1857,6 @@ enum nl80211_commands {
* that protected APs should be used. This is also used with NEW_BEACON to
* indicate that the BSS is to use protection.
*
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- * to indicate which unicast key ciphers will be used with the connection
- * (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which group key cipher will be used with the connection (a
- * u32).
* @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which WPA version(s) the AP we want to associate with is using
* (a u32 with flags from &enum nl80211_wpa_versions).
@@ -1898,6 +1887,7 @@ enum nl80211_commands {
* with %NL80211_KEY_* sub-attributes
*
* @NL80211_ATTR_PID: Process ID of a network namespace.
+ * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
*
* @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
* dumps. This number increases whenever the object list being
@@ -1952,6 +1942,7 @@ enum nl80211_commands {
*
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
* acknowledged by the recipient.
+ * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
*
* @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
*
@@ -2149,6 +2140,9 @@ enum nl80211_commands {
* @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
* this feature during association. This is a flag attribute.
* Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
+ * this feature during association. This is a flag attribute.
+ * Currently only supported in mac80211 drivers.
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
@@ -2158,6 +2152,12 @@ enum nl80211_commands {
* All values are treated as suggestions and may be ignored
* by the driver as required. The actual values may be seen in
* the station debugfs ht_caps file.
+ * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
+ * ATTR_VHT_CAPABILITY to which attention should be paid.
+ * Currently, only mac80211 NICs support this feature.
+ * All values are treated as suggestions and may be ignored
+ * by the driver as required. The actual values may be seen in
+ * the station debugfs vht_caps file.
*
* @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
* abides to when initiating radiation on DFS channels. A country maps
@@ -3565,7 +3565,7 @@ enum nl80211_sta_flags {
* enum nl80211_sta_p2p_ps_status - station support of P2P PS
*
* @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
- * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
+ * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
* @NUM_NL80211_P2P_PS_STATUS: number of values
*/
enum nl80211_sta_p2p_ps_status {
@@ -3603,9 +3603,9 @@ enum nl80211_he_gi {
/**
* enum nl80211_he_ltf - HE long training field
- * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
- * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
- * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
*/
enum nl80211_he_ltf {
NL80211_RATE_INFO_HE_1XLTF,
@@ -3720,7 +3720,7 @@ enum nl80211_eht_ru_alloc {
* @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
* (u8, see &enum nl80211_he_gi)
* @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
- * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
* non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
* @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
* @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
@@ -3852,8 +3852,8 @@ enum nl80211_sta_bss_param {
* Contains a nested array of signal strength attributes (u8, dBm)
* @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- * 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
+ * the 802.11 header (u32, kbps)
* @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
* (u64)
* @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
@@ -4179,7 +4179,7 @@ enum nl80211_band_attr {
* @NL80211_WMMR_CW_MAX: Maximum contention window slot.
* @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
* @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
- * @nl80211_WMMR_MAX: highest possible wmm rule.
+ * @NL80211_WMMR_MAX: highest possible wmm rule.
* @__NL80211_WMMR_LAST: Internal use.
*/
enum nl80211_wmm_rule {
@@ -4203,6 +4203,7 @@ enum nl80211_wmm_rule {
* @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
* are permitted on this channel, this includes sending probe
* requests, or modes of operation that require beaconing.
+ * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
* @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
@@ -4357,7 +4358,7 @@ enum nl80211_bitrate_attr {
};
/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
* @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
* regulatory domain.
* @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
@@ -4509,6 +4510,7 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require
* beaconing.
+ * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
@@ -4707,8 +4709,8 @@ enum nl80211_mntr_flags {
* alternate between Active and Doze states, but may not wake up
* for neighbor's beacons.
*
- * @__NL80211_MESH_POWER_AFTER_LAST - internal use
- * @NL80211_MESH_POWER_MAX - highest possible power save level
+ * @__NL80211_MESH_POWER_AFTER_LAST: internal use
+ * @NL80211_MESH_POWER_MAX: highest possible power save level
*/
enum nl80211_mesh_power_mode {
@@ -5728,7 +5730,7 @@ struct nl80211_pattern_support {
* "TCP connection wakeup" for more details. This is a nested attribute
* containing the exact information for establishing and keeping alive
* the TCP connection.
- * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the
+ * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
* wakeup packet was received on the TCP connection
* @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
* TCP connection was lost or failed to be established
@@ -6404,6 +6406,7 @@ enum nl80211_feature_flags {
* receiving control port frames over nl80211 instead of the netdevice.
* @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
* (average) ACK signal strength reporting.
+ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
* TXQs.
* @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -6787,6 +6790,8 @@ enum nl80211_acl_policy {
* @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
* @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
* turn on other antennas after CTS/RTS).
+ * @__NL80211_SMPS_AFTER_LAST: internal
+ * @NL80211_SMPS_MAX: highest used enumeration
*/
enum nl80211_smps_mode {
NL80211_SMPS_OFF,
@@ -7008,6 +7013,8 @@ enum nl80211_bss_select_attr {
* @NL80211_NAN_FUNC_PUBLISH: function is publish
* @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
* @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
+ * @NL80211_NAN_FUNC_MAX_TYPE: internal use
*/
enum nl80211_nan_function_type {
NL80211_NAN_FUNC_PUBLISH,
@@ -7168,7 +7175,7 @@ enum nl80211_nan_match_attributes {
};
/**
- * nl80211_external_auth_action - Action to perform with external
+ * enum nl80211_external_auth_action - Action to perform with external
* authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
* @NL80211_EXTERNAL_AUTH_START: Start the authentication.
* @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
@@ -7186,7 +7193,7 @@ enum nl80211_external_auth_action {
* @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
* i.e. starting with the measurement token
- * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
* (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
* i.e. starting with the measurement token
* @__NL80211_FTM_RESP_ATTR_LAST: Internal
@@ -7829,6 +7836,7 @@ enum nl80211_sae_pwe_mechanism {
*
* @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
*
+ * @NUM_NL80211_SAR_TYPE: internal
*/
enum nl80211_sar_type {
NL80211_SAR_TYPE_POWER,
@@ -7842,6 +7850,8 @@ enum nl80211_sar_type {
/**
* enum nl80211_sar_attrs - Attributes for SAR spec
*
+ * @__NL80211_SAR_ATTR_INVALID: Invalid
+ *
* @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
*
* @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
@@ -7873,6 +7883,8 @@ enum nl80211_sar_attrs {
/**
* enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
*
+ * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
+ *
* @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
* power limit value in units of 0.25 dBm if type is
* NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
--
2.42.0
