Search Linux Wireless

Re: [PATCH] wifi: ath12k: add support to handle beacon miss for WCN7850

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/18/2024 7:30 PM, kangyang wrote:
> From: Kang Yang <quic_kangyang@xxxxxxxxxxx>
> 
> When AP goes down or too far away without indication to STA, beacon miss
> will be detected. Then for WCN7850's firmware, it will use roam event
> to send beacon miss to host.
> 
> If STA doesn't handle the beacon miss, will keep the fake connection
> and unable to roam.
> 
> So add support for WCN7850 to trigger disconnection from AP when
> receiving this event from firmware.
> 
> It has to be noted that beacon miss event notification for QCN9274
> to be handled in a separate patch as it uses STA kickout WMI event
> to notify beacon miss and the current STA kickout event is processed
> as low_ack.
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
Acked-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux