From: Benjamin Berg <benjamin.berg@xxxxxxxxx>
If a non-TX BSS is included in a per-STA profile, then we cannot set
transmitted_bss for it. Even worse, if we do things properly we should
be configuring both bssid_index and max_bssid_indicator correctly. We do
not actually have both pieces of information (and, some APs currently
do not include either).
So, ignore any per-STA profile where the RNR says that the BSS is not
transmitted. Also fix transmitted_bss to never be set for per-STA
profiles.
This fixes issues where mac80211 was setting the reference BSSID to an
incorrect value.
Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@xxxxxxxxx>
Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@xxxxxxxxx>
---
net/wireless/scan.c | 47 ++++++++++++++++++++++++++++++++++++---------
1 file changed, 38 insertions(+), 9 deletions(-)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 8ac2d19d8ede..127853877a0a 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -2211,12 +2211,16 @@ cfg80211_inform_single_bss_data(struct wiphy *wiphy,
tmp.pub.use_for = data->use_for;
tmp.pub.cannot_use_reasons = data->cannot_use_reasons;
- if (data->bss_source != BSS_SOURCE_DIRECT) {
+ switch (data->bss_source) {
+ case BSS_SOURCE_MBSSID:
tmp.pub.transmitted_bss = data->source_bss;
+ fallthrough;
+ case BSS_SOURCE_STA_PROFILE:
ts = bss_from_pub(data->source_bss)->ts;
tmp.pub.bssid_index = data->bssid_index;
tmp.pub.max_bssid_indicator = data->max_bssid_indicator;
- } else {
+ break;
+ case BSS_SOURCE_DIRECT:
ts = jiffies;
if (channel->band == NL80211_BAND_60GHZ) {
@@ -2231,6 +2235,7 @@ cfg80211_inform_single_bss_data(struct wiphy *wiphy,
regulatory_hint_found_beacon(wiphy, channel,
gfp);
}
+ break;
}
/*
@@ -2660,6 +2665,7 @@ struct tbtt_info_iter_data {
u8 param_ch_count;
u32 use_for;
u8 mld_id, link_id;
+ bool non_tx;
};
static enum cfg80211_rnr_iter_ret
@@ -2670,14 +2676,20 @@ cfg802121_mld_ap_rnr_iter(void *_data, u8 type,
const struct ieee80211_rnr_mld_params *mld_params;
struct tbtt_info_iter_data *data = _data;
u8 link_id;
+ bool non_tx = false;
if (type == IEEE80211_TBTT_INFO_TYPE_TBTT &&
tbtt_info_len >= offsetofend(struct ieee80211_tbtt_info_ge_11,
- mld_params))
- mld_params = (void *)(tbtt_info +
- offsetof(struct ieee80211_tbtt_info_ge_11,
- mld_params));
- else if (type == IEEE80211_TBTT_INFO_TYPE_MLD &&
+ mld_params)) {
+ const struct ieee80211_tbtt_info_ge_11 *tbtt_info_ge_11 =
+ (void *)tbtt_info;
+
+ non_tx = (tbtt_info_ge_11->bss_params &
+ (IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID |
+ IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID)) ==
+ IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID;
+ mld_params = &tbtt_info_ge_11->mld_params;
+ } else if (type == IEEE80211_TBTT_INFO_TYPE_MLD &&
tbtt_info_len >= sizeof(struct ieee80211_rnr_mld_params))
mld_params = (void *)tbtt_info;
else
@@ -2696,6 +2708,7 @@ cfg802121_mld_ap_rnr_iter(void *_data, u8 type,
data->param_ch_count =
le16_get_bits(mld_params->params,
IEEE80211_RNR_MLD_PARAMS_BSS_CHANGE_COUNT);
+ data->non_tx = non_tx;
if (type == IEEE80211_TBTT_INFO_TYPE_TBTT)
data->use_for = NL80211_BSS_USE_FOR_ALL;
@@ -2707,7 +2720,7 @@ cfg802121_mld_ap_rnr_iter(void *_data, u8 type,
static u8
cfg80211_rnr_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
const struct ieee80211_neighbor_ap_info **ap_info,
- u8 *param_ch_count)
+ u8 *param_ch_count, bool *non_tx)
{
struct tbtt_info_iter_data data = {
.mld_id = mld_id,
@@ -2718,6 +2731,7 @@ cfg80211_rnr_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
*ap_info = data.ap_info;
*param_ch_count = data.param_ch_count;
+ *non_tx = data.non_tx;
return data.use_for;
}
@@ -2897,6 +2911,7 @@ cfg80211_parse_ml_elem_sta_data(struct wiphy *wiphy,
ssize_t profile_len;
u8 param_ch_count;
u8 link_id, use_for;
+ bool non_tx;
if (!ieee80211_mle_basic_sta_prof_size_ok((u8 *)mle->sta_prof[i],
mle->sta_prof_len[i]))
@@ -2942,10 +2957,24 @@ cfg80211_parse_ml_elem_sta_data(struct wiphy *wiphy,
tx_data->ielen,
mld_id, link_id,
&ap_info,
- ¶m_ch_count);
+ ¶m_ch_count,
+ &non_tx);
if (!use_for)
continue;
+ /*
+ * As of 802.11be_D5.0, the specification does not give us any
+ * way of discovering both the MaxBSSID and the Multiple-BSSID
+ * Index. It does seem like the Multiple-BSSID Index element
+ * may be provided, but section 9.4.2.45 explicitly forbids
+ * including a Multiple-BSSID Element (in this case without any
+ * subelements).
+ * Without both pieces of information we cannot calculate the
+ * reference BSSID, so simply ignore the BSS.
+ */
+ if (non_tx)
+ continue;
+
/* We could sanity check the BSSID is included */
if (!ieee80211_operating_class_to_band(ap_info->op_class,
--
2.34.1
