On 3/12/2024 6:55 AM, Rameshkumar Sundaram wrote:
> From: Sriram R <quic_srirrama@xxxxxxxxxxx>
>
> When mac80211 does drv start/stop, apply the state change
> for all the radios within the wiphy in ath12k.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>
> Signed-off-by: Sriram R <quic_srirrama@xxxxxxxxxxx>
> Signed-off-by: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx>
> ---
> drivers/net/wireless/ath/ath12k/mac.c | 43 +++++++++++++++++++--------
> 1 file changed, 31 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
> index 0f33f5615170..4afaba3ba934 100644
> --- a/drivers/net/wireless/ath/ath12k/mac.c
> +++ b/drivers/net/wireless/ath/ath12k/mac.c
> @@ -243,6 +243,7 @@ static const u32 ath12k_smps_map[] = {
>
> static int ath12k_start_vdev_delay(struct ath12k *ar,
> struct ath12k_vif *arvif);
> +static void ath12k_mac_stop(struct ath12k *ar);
>
> static const char *ath12k_mac_phymode_str(enum wmi_phy_mode mode)
> {
> @@ -5472,23 +5473,39 @@ static int ath12k_mac_start(struct ath12k *ar)
> return ret;
> }
>
> +static void ath12k_drain_tx(struct ath12k_hw *ah)
> +{
> + struct ath12k *ar;
> + int i;
> +
> + for_each_ar(i, ah, ar)
> + ath12k_mac_drain_tx(ar);
> +}
> +
> static int ath12k_mac_op_start(struct ieee80211_hw *hw)
> {
> struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
> - struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
> - struct ath12k_base *ab = ar->ab;
> - int ret;
> + struct ath12k *ar;
> + int ret, i;
>
> - ath12k_mac_drain_tx(ar);
> + ath12k_drain_tx(ah);
>
> - ret = ath12k_mac_start(ar);
> - if (ret) {
> - ath12k_err(ab, "fail to start mac operations in pdev idx %d ret %d\n",
> - ar->pdev_idx, ret);
> - return ret;
> + for_each_ar(i, ah, ar) {
> + ret = ath12k_mac_start(ar);
> + if (ret) {
> + ath12k_err(ar->ab, "fail to start mac operations in pdev idx %d ret %d\n",
> + ar->pdev_idx, ret);
> + goto fail_start;
> + }
> }
>
> return 0;
> +fail_start:
> + for (; i > 0; i--) {
should this be >= 0? otherwise you never stop radio 0
also note that this has a dependency upon how the macro is implemented since
that determines when i is incremented.
> + ar = ath12k_ah_to_ar(ah, i);
> + ath12k_mac_stop(ar);
> + }
> + return ret;
> }
>
> int ath12k_mac_rfkill_config(struct ath12k *ar)
> @@ -5584,11 +5601,13 @@ static void ath12k_mac_stop(struct ath12k *ar)
> static void ath12k_mac_op_stop(struct ieee80211_hw *hw)
> {
> struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
> - struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
> + struct ath12k *ar;
> + int i;
>
> - ath12k_mac_drain_tx(ar);
> + ath12k_drain_tx(ah);
>
> - ath12k_mac_stop(ar);
> + for_each_ar(i, ah, ar)
> + ath12k_mac_stop(ar);
> }
>
> static u8
