Search Linux Wireless

Re: [PATCH 3/6] wifi: ath11k: implement handling of P2P NoA event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/25/2024 10:02 PM, Kang Yang wrote:
> The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
> signal its absence due to power save timing, concurrent operation, or
> off-channel scanning. It is also used in the P2P Presence Request-Response
> mechanism.
> 
> The NoA attribute shall be present in the P2P IE in the beacon frames
> transmitted by a P2P Group Owner when a NoA schedule is being advertised,
> or when the CTWindow is non-zero.
> 
> So add support to update P2P information after P2P GO is up through
> event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
> 
> Create p2p.c and p2p.h for P2P related functions and definitions.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
> 
> Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
> ---
>  drivers/net/wireless/ath/ath11k/Makefile |   3 +-
>  drivers/net/wireless/ath/ath11k/p2p.c    | 145 +++++++++++++++++++++++
>  drivers/net/wireless/ath/ath11k/p2p.h    |  23 ++++
>  drivers/net/wireless/ath/ath11k/wmi.c    |  57 ++++++++-
>  drivers/net/wireless/ath/ath11k/wmi.h    |  31 +++++
>  5 files changed, 257 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
>  create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
> 
> diff --git a/drivers/net/wireless/ath/ath11k/Makefile b/drivers/net/wireless/ath/ath11k/Makefile
> index 2c94d50ae36f..43d2d8ddcdc0 100644
> --- a/drivers/net/wireless/ath/ath11k/Makefile
> +++ b/drivers/net/wireless/ath/ath11k/Makefile
> @@ -18,7 +18,8 @@ ath11k-y += core.o \
>  	    dbring.o \
>  	    hw.o \
>  	    pcic.o \
> -	    fw.o
> +	    fw.o \
> +	    p2p.o
>  
>  ath11k-$(CONFIG_ATH11K_DEBUGFS) += debugfs.o debugfs_htt_stats.o debugfs_sta.o
>  ath11k-$(CONFIG_NL80211_TESTMODE) += testmode.o
> diff --git a/drivers/net/wireless/ath/ath11k/p2p.c b/drivers/net/wireless/ath/ath11k/p2p.c
> new file mode 100644
> index 000000000000..bfaeea12bc09
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath11k/p2p.c
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: BSD-3-Clause-Clear
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "core.h"
> +#include "wmi.h"
> +#include "mac.h"
> +#include "p2p.h"
> +
> +static void ath11k_p2p_noa_ie_fill(u8 *data, size_t len,
> +				   const struct ath11k_wmi_p2p_noa_info *noa)
> +{
> +	struct ieee80211_p2p_noa_attr *noa_attr;
> +	u8 ctwindow = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_CTWIN_TU);
> +	bool oppps = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS);
> +	__le16 *noa_attr_len;
> +	u16 attr_len;
> +	u8 noa_descriptors = u32_get_bits(noa->noa_attr,
> +					   WMI_P2P_NOA_INFO_DESC_NUM);

do you need to validate that this doesn't exceed
WMI_P2P_MAX_NOA_DESCRIPTORS?

> +	int i;
> +
> +	/* P2P IE */
> +	data[0] = WLAN_EID_VENDOR_SPECIFIC;
> +	data[1] = len - 2;
> +	data[2] = (WLAN_OUI_WFA >> 16) & 0xff;
> +	data[3] = (WLAN_OUI_WFA >> 8) & 0xff;
> +	data[4] = (WLAN_OUI_WFA >> 0) & 0xff;
> +	data[5] = WLAN_OUI_TYPE_WFA_P2P;
> +
> +	/* NOA ATTR */
> +	data[6] = IEEE80211_P2P_ATTR_ABSENCE_NOTICE;
> +	noa_attr_len = (__le16 *)&data[7]; /* 2 bytes */
> +	noa_attr = (struct ieee80211_p2p_noa_attr *)&data[9];
> +
> +	noa_attr->index = u32_get_bits(noa->noa_attr,
> +				       WMI_P2P_NOA_INFO_INDEX);
> +	noa_attr->oppps_ctwindow = ctwindow;
> +	if (oppps)
> +		noa_attr->oppps_ctwindow |= IEEE80211_P2P_OPPPS_ENABLE_BIT;
> +
> +	for (i = 0; i < noa_descriptors; i++) {
> +		noa_attr->desc[i].count = noa->descriptors[i].type_count;
> +		noa_attr->desc[i].duration =
> +			cpu_to_le32(noa->descriptors[i].duration);
> +		noa_attr->desc[i].interval =
> +			cpu_to_le32(noa->descriptors[i].interval);
> +		noa_attr->desc[i].start_time =
> +			cpu_to_le32(noa->descriptors[i].start_time);
> +	}
> +
> +	attr_len = 2; /* index + oppps_ctwindow */
> +	attr_len += noa_descriptors * sizeof(struct ieee80211_p2p_noa_desc);
> +	*noa_attr_len = __cpu_to_le16(attr_len);
> +}
> +
> +static size_t
> +ath11k_p2p_noa_ie_len_compute(const struct ath11k_wmi_p2p_noa_info *noa)
> +{
> +	size_t len = 0;
> +
> +	if (!(u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM)) &&
> +	    !(u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS)))
> +		return 0;
> +
> +	len += 1 + 1 + 4; /* EID + len + OUI */
> +	len += 1 + 2; /* noa attr + attr len */
> +	len += 1 + 1; /* index + oppps_ctwindow */
> +	len += u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM) *

here again do you need to validate that this doesn't exceed
WMI_P2P_MAX_NOA_DESCRIPTORS?

also rather than call u32_get_bits() twice for the same field, call it
once and cache the result

> +			sizeof(struct ieee80211_p2p_noa_desc);
> +
> +	return len;
> +}
> +
> +static void ath11k_p2p_noa_ie_assign(struct ath11k_vif *arvif, void *ie,
> +				     size_t len)
> +{
> +	struct ath11k *ar = arvif->ar;
> +
> +	lockdep_assert_held(&ar->data_lock);
> +
> +	kfree(arvif->u.ap.noa_data);
> +
> +	arvif->u.ap.noa_data = ie;
> +	arvif->u.ap.noa_len = len;
> +}
> +
> +static void __ath11k_p2p_noa_update(struct ath11k_vif *arvif,
> +				    const struct ath11k_wmi_p2p_noa_info *noa)
> +{
> +	struct ath11k *ar = arvif->ar;
> +	void *ie;
> +	size_t len;
> +
> +	lockdep_assert_held(&ar->data_lock);
> +
> +	ath11k_p2p_noa_ie_assign(arvif, NULL, 0);
> +
> +	len = ath11k_p2p_noa_ie_len_compute(noa);
> +	if (!len)
> +		return;
> +
> +	ie = kmalloc(len, GFP_ATOMIC);
> +	if (!ie)
> +		return;
> +
> +	ath11k_p2p_noa_ie_fill(ie, len, noa);
> +	ath11k_p2p_noa_ie_assign(arvif, ie, len); }
> +
> +void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
> +			   const struct ath11k_wmi_p2p_noa_info *noa)
> +{
> +	struct ath11k *ar = arvif->ar;
> +
> +	spin_lock_bh(&ar->data_lock);
> +	__ath11k_p2p_noa_update(arvif, noa);
> +	spin_unlock_bh(&ar->data_lock);
> +}
> +
> +static void ath11k_p2p_noa_update_vdev_iter(void *data, u8 *mac,
> +					    struct ieee80211_vif *vif)
> +{
> +	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
> +	struct ath11k_p2p_noa_arg *arg = data;
> +
> +	if (arvif->vdev_id != arg->vdev_id)
> +		return;
> +
> +	ath11k_p2p_noa_update(arvif, arg->noa);
> +}
> +
> +void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
> +				      const struct ath11k_wmi_p2p_noa_info *noa)
> +{
> +	struct ath11k_p2p_noa_arg arg = {
> +		.vdev_id = vdev_id,
> +		.noa = noa,
> +	};
> +
> +	ieee80211_iterate_active_interfaces_atomic(ar->hw,
> +						   IEEE80211_IFACE_ITER_NORMAL,
> +						   ath11k_p2p_noa_update_vdev_iter,
> +						   &arg);
> +}
> +

As part of "b4 shazam" I'm getting:
ath/.git/rebase-apply/patch:175: new blank line at EOF.
+

which I think comes from here. so remove the blank line at the end of file

> diff --git a/drivers/net/wireless/ath/ath11k/p2p.h b/drivers/net/wireless/ath/ath11k/p2p.h
> new file mode 100644
> index 000000000000..ebd076f7fe7f
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath11k/p2p.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: BSD-3-Clause-Clear */
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#ifndef ATH11K_P2P_H
> +#define ATH11K_P2P_H
> +
> +#include "wmi.h"
> +
> +struct ath11k_wmi_p2p_noa_info;
> +
> +struct ath11k_p2p_noa_arg {
> +	u32 vdev_id;
> +	const struct ath11k_wmi_p2p_noa_info *noa;
> +};
> +
> +void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
> +			   const struct ath11k_wmi_p2p_noa_info *noa);
> +void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
> +				      const struct ath11k_wmi_p2p_noa_info *noa);
> +#endif
> +

ditto here:
ath/.git/rebase-apply/patch:204: new blank line at EOF.
+


> diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
> index d86fcdd374c6..bbccddd7d729 100644
> --- a/drivers/net/wireless/ath/ath11k/wmi.c
> +++ b/drivers/net/wireless/ath/ath11k/wmi.c
> @@ -20,6 +20,7 @@
>  #include "hw.h"
>  #include "peer.h"
>  #include "testmode.h"
> +#include "p2p.h"
>  
>  struct wmi_tlv_policy {
>  	size_t min_len;
> @@ -154,6 +155,10 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
>  		.min_len = sizeof(struct wmi_per_chain_rssi_stats) },
>  	[WMI_TAG_TWT_ADD_DIALOG_COMPLETE_EVENT] = {
>  		.min_len = sizeof(struct wmi_twt_add_dialog_event) },
> +	[WMI_TAG_P2P_NOA_INFO] = {
> +		.min_len = sizeof(struct ath11k_wmi_p2p_noa_info) },
> +	[WMI_TAG_P2P_NOA_EVENT] = {
> +		.min_len = sizeof(struct wmi_p2p_noa_event) },
>  };
>  
>  #define PRIMAP(_hw_mode_) \
> @@ -981,7 +986,7 @@ int ath11k_wmi_vdev_start(struct ath11k *ar, struct wmi_vdev_start_req_arg *arg,
>  		      FIELD_PREP(WMI_TLV_LEN, 0);
>  
>  	/* Note: This is a nested TLV containing:
> -	 * [wmi_tlv][wmi_p2p_noa_descriptor][wmi_tlv]..
> +	 * [wmi_tlv][ath11k_wmi_p2p_noa_descriptor][wmi_tlv]..
>  	 */
>  
>  	ptr += sizeof(*tlv);
> @@ -8645,6 +8650,53 @@ static void ath11k_wmi_gtk_offload_status_event(struct ath11k_base *ab,
>  	kfree(tb);
>  }
>  
> +static int ath11k_wmi_p2p_noa_event(struct ath11k_base *ab,
> +				    struct sk_buff *skb)
> +{
> +	const void **tb;
> +	const struct wmi_p2p_noa_event *ev;
> +	const struct ath11k_wmi_p2p_noa_info *noa;
> +	struct ath11k *ar;
> +	int ret, vdev_id;
> +
> +	tb = ath11k_wmi_tlv_parse_alloc(ab, skb, GFP_ATOMIC);
> +	if (IS_ERR(tb)) {
> +		ret = PTR_ERR(tb);
> +		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ev = tb[WMI_TAG_P2P_NOA_EVENT];
> +	noa = tb[WMI_TAG_P2P_NOA_INFO];
> +
> +	if (!ev || !noa) {
> +		ret = -EPROTO;
> +		goto out;
> +	}
> +
> +	vdev_id = ev->vdev_id;
> +
> +	ath11k_dbg(ab, ATH11K_DBG_WMI,
> +		   "wmi tlv p2p noa vdev_id %i descriptors %u\n",
> +		   vdev_id, u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM));
> +	rcu_read_lock();
> +	ar = ath11k_mac_get_ar_by_vdev_id(ab, vdev_id);
> +	if (!ar) {
> +		ath11k_warn(ab, "invalid vdev id %d in P2P NoA event\n",
> +			    vdev_id);
> +		ret = -EINVAL;
> +		goto unlock;
> +	}
> +
> +	ath11k_p2p_noa_update_by_vdev_id(ar, vdev_id, noa);
> +
> +unlock:
> +	rcu_read_unlock();
> +out:
> +	kfree(tb);
> +	return 0;
> +}
> +
>  static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
>  {
>  	struct wmi_cmd_hdr *cmd_hdr;
> @@ -8772,6 +8824,9 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
>  	case WMI_GTK_OFFLOAD_STATUS_EVENTID:
>  		ath11k_wmi_gtk_offload_status_event(ab, skb);
>  		break;
> +	case WMI_P2P_NOA_EVENTID:
> +		ath11k_wmi_p2p_noa_event(ab, skb);
> +		break;
>  	default:
>  		ath11k_dbg(ab, ATH11K_DBG_WMI, "unsupported event id 0x%x\n", id);
>  		break;
> diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
> index 4c20202947c7..564f4a9ac8ce 100644
> --- a/drivers/net/wireless/ath/ath11k/wmi.h
> +++ b/drivers/net/wireless/ath/ath11k/wmi.h

drivers/net/wireless/ath/ath11k/wmi.h QuIC copyright missing 2024

> @@ -3630,6 +3630,37 @@ struct wmi_ftm_event_msg {
>  	u8 data[];
>  } __packed;
>  
> +#define WMI_P2P_MAX_NOA_DESCRIPTORS		4
> +
> +struct wmi_p2p_noa_event {
> +	u32 vdev_id;
> +} __packed;
> +
> +struct ath11k_wmi_p2p_noa_descriptor {
> +	u32 type_count; /* 255: continuous schedule, 0: reserved */
> +	u32 duration;  /* Absent period duration in micro seconds */
> +	u32 interval;   /* Absent period interval in micro seconds */
> +	u32 start_time; /* 32 bit tsf time when in starts */
> +} __packed;
> +
> +#define WMI_P2P_NOA_INFO_CHANGED_FLAG		BIT(0)
> +#define WMI_P2P_NOA_INFO_INDEX			GENMASK(15, 8)
> +#define WMI_P2P_NOA_INFO_OPP_PS			BIT(16)
> +#define WMI_P2P_NOA_INFO_CTWIN_TU		GENMASK(23, 17)
> +#define WMI_P2P_NOA_INFO_DESC_NUM		GENMASK(31, 24)
> +
> +struct ath11k_wmi_p2p_noa_info {
> +	/* Bit 0 - Flag to indicate an update in NOA schedule
> +	 * Bits 7-1 - Reserved
> +	 * Bits 15-8 - Index (identifies the instance of NOA sub element)
> +	 * Bit  16 - Opp PS state of the AP
> +	 * Bits 23-17 -  Ctwindow in TUs
> +	 * Bits 31-24 -  Number of NOA descriptors
> +	 */
> +	u32 noa_attr;
> +	struct ath11k_wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];

so firmware always sends the max number of records even if Bits 31-24 -
Number of NOA descriptors indicates a smaller number?

> +} __packed;
> +
>  #define WMI_BEACON_TX_BUFFER_SIZE	512
>  
>  #define WMI_EMA_TMPL_IDX_SHIFT            8

I'm seeing things today I probably missed in the ath12k review, so let's
make sure that when this is merged that ath12k si updated as well.

/jeff




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux