From: Kuan-Chung Chen <damon.chen@xxxxxxxxxxx> Adjust beamforming capabilities to accurately reflect the supported EHT features by WiFi 7 chip 8922A. It includes 1) Unset EHT CQI feedback and 16-subcarrier grouping. 2) Correct Beamformee SS value. 3) Enable partial and full bandwidth SU/MU feedback. Signed-off-by: Kuan-Chung Chen <damon.chen@xxxxxxxxxxx> Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> --- drivers/net/wireless/realtek/rtw89/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c index d4bca8cd08f2..d474b8d5df3d 100644 --- a/drivers/net/wireless/realtek/rtw89/core.c +++ b/drivers/net/wireless/realtek/rtw89/core.c @@ -3801,7 +3801,7 @@ static void rtw89_init_eht_cap(struct rtw89_dev *rtwdev, struct ieee80211_sta_eht_cap *eht_cap; struct rtw89_hal *hal = &rtwdev->hal; bool support_320mhz = false; - int sts = 3; + int sts = 8; u8 val; if (chip->chip_gen == RTW89_CHIP_AX) @@ -3845,18 +3845,16 @@ static void rtw89_init_eht_cap(struct rtw89_dev *rtwdev, eht_cap_elem->phy_cap_info[2] = 0; eht_cap_elem->phy_cap_info[3] = - IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK | - IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK | IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK | IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK | - IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK; + IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK | + IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK; eht_cap_elem->phy_cap_info[4] = IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP | u8_encode_bits(1, IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK); eht_cap_elem->phy_cap_info[5] = - IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK | u8_encode_bits(IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US, IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK); -- 2.25.1
