Search Linux Wireless

[PATCH v5 10/18] PCI: hold the rescan mutex when scanning for the first time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

With the introduction of PCI device power control drivers that will be
able to trigger the port rescan when probing, we need to hold the rescan
mutex during the initial pci_host_probe() too or the two could get in
each other's way.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 drivers/pci/probe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 467c16358f17..f8ba073ffc9b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3066,7 +3066,9 @@ int pci_host_probe(struct pci_host_bridge *bridge)
 	struct pci_bus *bus, *child;
 	int ret;
 
+	pci_lock_rescan_remove();
 	ret = pci_scan_root_bus_bridge(bridge);
+	pci_unlock_rescan_remove();
 	if (ret < 0) {
 		dev_err(bridge->dev.parent, "Scanning root bridge failed");
 		return ret;
-- 
2.40.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux