rtl8192cu handles 1T1R devices (RTL8188CUS), 1T2R devices (RTL8191CU), and 2T2R devices (RTL8192CU). The 2T2R devices were incorrectly detected as 1T2R because of a mistake in the IS_92C_1T2R macro. The visible effect of this is that the firmware was allowed to use TX rates only up to MCS7. Fix the IS_92C_1T2R macro. Now my 2T2R device has much better upload speed. Before: 46 Mbps. After: 82 Mbps. Also fix a debug message which was printing "RF_1T1R" even for 1T2R chips. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> --- drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h | 2 +- drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h index 91e4427ab022..4757f93b84e4 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/def.h @@ -11,7 +11,7 @@ #define CHIP_VENDOR_UMC_B_CUT BIT(6) #define IS_92C_1T2R(version) \ - (((version) & CHIP_92C) && ((version) & CHIP_92C_1T2R)) + (((version) & CHIP_92C_1T2R) == CHIP_92C_1T2R) #define IS_VENDOR_UMC(version) \ (((version) & CHIP_VENDOR_UMC) ? true : false) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c index 4ff0d4118193..a76f2dc8a977 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c @@ -101,7 +101,8 @@ void rtl92c_read_chip_version(struct ieee80211_hw *hw) rtlphy->rf_type = RF_1T1R; rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "Chip RF Type: %s\n", - rtlphy->rf_type == RF_2T2R ? "RF_2T2R" : "RF_1T1R"); + rtlphy->rf_type == RF_2T2R ? "RF_2T2R" : + rtlphy->rf_type == RF_1T2R ? "RF_1T2R" : "RF_1T1R"); if (get_rf_type(rtlphy) == RF_1T1R) rtlpriv->dm.rfpath_rxenable[0] = true; else -- 2.43.0
