Search Linux Wireless

Re: [PATCH v6 05/11] wifi: ath12k: implement handling of P2P NoA event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/6/2024 10:17 AM, Kalle Valo wrote:
> Kalle Valo <kvalo@xxxxxxxxxx> writes:
> 
>> Kang Yang <quic_kangyang@xxxxxxxxxxx> writes:
>>
>>> The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
>>> signal its absence due to power save timing, concurrent operation, or
>>> off-channel scanning. It is also used in the P2P Presence Request-Response
>>> mechanism.
>>>
>>> The NoA attribute shall be present in the P2P IE in the beacon frames
>>> transmitted by a P2P Group Owner when a NoA schedule is being advertised,
>>> or when the CTWindow is non-zero.
>>>
>>> So add support to update P2P information after P2P GO is up through
>>> event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
>>>
>>> Create p2p.c and p2p.h for P2P related functions and definitions.
>>>
>>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>>> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
>>>
>>> Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
>>
>> [...]
>>
>>> +static int ath12k_wmi_p2p_noa_event(struct ath12k_base *ab,
>>> +				    struct sk_buff *skb)
>>> +{
>>> +	const void **tb;
>>> +	const struct wmi_p2p_noa_event *ev;
>>> +	const struct ath12k_wmi_p2p_noa_info *noa;
>>> +	struct ath12k *ar;
>>> +	int ret, vdev_id;
>>> +
>>> +	tb = ath12k_wmi_tlv_parse_alloc(ab, skb, GFP_ATOMIC);
>>> +	if (IS_ERR(tb)) {
>>> +		ret = PTR_ERR(tb);
>>> +		ath12k_warn(ab, "failed to parse tlv: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ev = tb[WMI_TAG_P2P_NOA_EVENT];
>>> +	noa = tb[WMI_TAG_P2P_NOA_INFO];
>>> +
>>> +	if (!ev || !noa) {
>>> +		kfree(tb);
>>> +		return -EPROTO;
>>> +	}
>>> +
>>> +	vdev_id = __le32_to_cpu(ev->vdev_id);
>>> +
>>> +	ath12k_dbg(ab, ATH12K_DBG_WMI,
>>> +		   "wmi tlv p2p noa vdev_id %i descriptors %u\n",
>>> +		   vdev_id, le32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM));
>>> +	ar = ath12k_mac_get_ar_by_vdev_id(ab, vdev_id);
>>> +	if (!ar) {
>>> +		ath12k_warn(ab, "invalid vdev id %d in P2P NoA event\n",
>>> +			    vdev_id);
>>> +		return -EINVAL;
>>> +	}
>>
>> Aren't we leaking tb here? In this function I revamped the error
>> handling to use the out label to make sure we are freeing tb in every
>> error. Please review:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=12e182b47078a48169e873c51d438d7417e7e0c8
> 
> I realised that ret was uninitialised when no error, new version:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=43f3069f6580b8a67969a6f32377d35aa7dd8d9a

Thanks Kalle, looks like I had a review failure on the original :(
The version here LGTM :)

/jeff
> 





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux