Introduce MLO/DBCC mode variable that is used to configure PHY mode for
various application. The later implementation of chip_ops will reference
the mode to set registers. Though we have not really enabled MLO.
Other patches are chips_ops to enable BB/RF, set TX power and BT
coexistence helpers. Also, define chip specified registers that are used
by common logic flow.
v2:
- modify patches 3/6 and 5/6 because we found some problems during
verification.
Chung-Hsuan Hung (1):
wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to
control TX/RX
Ping-Ke Shih (5):
wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips
wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf
wifi: rtw89: 8922a: add chip_ops related to BB init
wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR
and EDCCA
wifi: rtw89: 8922a: add TX power related ops
drivers/net/wireless/realtek/rtw89/core.c | 3 +
drivers/net/wireless/realtek/rtw89/core.h | 42 ++
drivers/net/wireless/realtek/rtw89/phy.c | 1 +
drivers/net/wireless/realtek/rtw89/phy.h | 10 +
drivers/net/wireless/realtek/rtw89/reg.h | 199 +++++++-
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 1 +
drivers/net/wireless/realtek/rtw89/rtw8852a.c | 1 +
drivers/net/wireless/realtek/rtw89/rtw8852b.c | 1 +
drivers/net/wireless/realtek/rtw89/rtw8852c.c | 1 +
drivers/net/wireless/realtek/rtw89/rtw8922a.c | 482 ++++++++++++++++++
10 files changed, 740 insertions(+), 1 deletion(-)
--
2.25.1
