On 1/12/24 10:42, Johannes Berg wrote:
On Fri, 2024-01-12 at 15:10 +0200, Kalle Valo wrote:
Miri Korenblit <miriam.rachel.korenblit@xxxxxxxxx> writes:
+ /* currently no support for HE client where HT has 40 MHz but not HT */
+ if (iftd->he_cap.has_he &&
+ iftd->types_mask & (BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT)) &&
+ sband->ht_cap.ht_supported &&
+ sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
+ !(iftd->he_cap.he_cap_elem.phy_cap_info[0] & he_40_mhz_cap))
+ return -EINVAL;
Should there be a warning message so that this is noticed if it ever
happens? I don't know.
Yeah I don't really know either. I've done that a lot in the past, but
these days I'm kind of thinking that people who develop their drivers
should have some debug story and be able to figure it out? You know
better perhaps ...
Though it'd kind of suck to indent this further with WARN_ON ;-)
johannes
I tried backporting this patch into my 6.7 tree. An mtk7915 radio system blows up badly
in this case. Likely this is mt76 bug, but also...it used to work and the crash doesn't
make it very obvious that the above code is to blame.
So, I suggest making this a WARN_ON with appropriate debugging output, let that get some
testing, and then when drivers are fixed, maybe add in the 'return -EINVAL'.
mt7915e 0000:06:00.0: mt7915_register_device failed, ret: -22
mt7915e 0000:06:00.0: mt7915_pci_probe had error on try 3/3, ret: -22
stack segment: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 35 Comm: ksoftirqd/3 Tainted: G WC 6.7.0+ #31
Hardware name: Broachlink NOAH V2 E3845/Aptio CRB, BIOS 5.6.10 08/19/2021
RIP: 0010:tasklet_action_common.constprop.0+0x80/0x220
Code: 00 00 00 00 49 8b 44 24 08 48 89 18 49 89 5c 24 08 66 90 65 66 44 09 35 9e a6 ea 7e fb 0f 1f 44 00 00 48 85 ed 74 53 48 89 eb <48> 8b 6d 000
RSP: 0018:ffffc90000153e50 EFLAGS: 00010202
RAX: ffff8881283271a8 RBX: 005fff800002012c RCX: 0000000000000006
RDX: ffffffff82606ad0 RSI: 0000000000000006 RDI: ffffea0004435488
RBP: 005fff800002012c R08: 0000000000000002 R09: 0000000080000100
R10: ffffffff826060c0 R11: 000000000002e000 R12: ffff88813bd9c230
R13: ffffea0004435488 R14: 0000000000000040 R15: 0000000000000006
FS: 0000000000000000(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565149684ff4 CR3: 000000012176b000 CR4: 00000000001006f0
Call Trace:
<TASK>
? die+0x2d/0x80
? do_trap+0xcd/0xf0
? do_error_trap+0x65/0x80
? exc_stack_segment+0x33/0x50
? asm_exc_stack_segment+0x22/0x30
? tasklet_action_common.constprop.0+0x80/0x220
__do_softirq+0xb4/0x293
? sort_range+0x20/0x20
run_ksoftirqd+0x1f/0x30
smpboot_thread_fn+0xc2/0x1a0
kthread+0xdc/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x28/0x40
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: qrtr ofpart spi_nor mtd intel_rapl_msr at24 spi_intel_platform regmap_i2c spi_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_supports
---[ end trace 0000000000000000 ]---
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
