Search Linux Wireless

[PATCH V2 3/4] wifi: brcmfmac: move feature overrides before feature_disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The feature_disable option in brcmf_feat_attach() is a debugging or
workaround option to disable features that cause driver issues. Hence
they should be done as last step after all feature detection mechanisms
have been completed.

Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 7fef93ede0fb..f23310a77a5d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -340,6 +340,9 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_SCAN_V2, "scan_ver");
 
+	brcmf_feat_wlc_version_overrides(drvr);
+	brcmf_feat_firmware_overrides(drvr);
+
 	brcmf_fwvid_feat_attach(ifp);
 
 	if (drvr->settings->feature_disable) {
@@ -349,9 +352,6 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 		ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
 	}
 
-	brcmf_feat_wlc_version_overrides(drvr);
-	brcmf_feat_firmware_overrides(drvr);
-
 	/* set chip related quirks */
 	switch (drvr->bus_if->chip) {
 	case BRCM_CC_43236_CHIP_ID:
-- 
2.32.0

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux