Recently acquired a MacBookPro8,3 (early 2011), which has a bcm4331 card.
Noticed some issues with the wireless driver, specifically related to QoS, when
using this device.
Out of the box, applications like ssh appear to not work with the device when
QoS is enabled. This series attempts to improve the out-of-box experience while
cleaning up some fundamental issues in the driver when QoS is disabled, either
by the related kernel parameter or the newly introduced QoS disablement
function.
Running FW 784.2 during testing.
Log:
[ 11.661972] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 11.919942] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 13.717460] [drm] amdgpu kernel modesetting enabled.
[ 13.717705] amdgpu: Virtual CRAT table created for CPU
[ 13.717719] amdgpu: Topology: Add CPU node
[ 13.776896] NET: Registered PF_PACKET protocol family
[ 15.234058] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 15.319388] wlp3s0b1: authenticate with 1c:87:2c:6f:f4:e0
[ 15.333239] wlp3s0b1: send auth to 1c:87:2c:6f:f4:e0 (try 1/3)
[ 15.341672] wlp3s0b1: authenticated
[ 15.341921] wlp3s0b1: associate with 1c:87:2c:6f:f4:e0 (try 1/3)
[ 15.346912] wlp3s0b1: RX AssocResp from 1c:87:2c:6f:f4:e0 (capab=0x411 status=0 aid=3)
[ 15.347255] wlp3s0b1: associated
Link: https://lore.kernel.org/linux-wireless/20231230045105.91351-1-sergeantsagara@xxxxxxxxxxxxxx/
Rahul Rameshbabu (4):
wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
wifi: b43: Stop correct queue in DMA worker when QoS is disabled
wifi: b43: Disable QoS for bcm4331
drivers/net/wireless/broadcom/b43/b43.h | 16 ++++++++++++++++
drivers/net/wireless/broadcom/b43/dma.c | 4 ++--
drivers/net/wireless/broadcom/b43/main.c | 16 +++++++++-------
drivers/net/wireless/broadcom/b43/pio.c | 6 +++---
4 files changed, 30 insertions(+), 12 deletions(-)
--
2.42.0
