I cannot compile the current compat tarball. Make log: ./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h make -C /usr/src/linux-2.6.26.6-rt11/ M=/root/compat-wireless-2.6-old modules make[1]: Entering directory `/usr/src/linux-2.6.26.6-rt11' CC [M] /root/compat-wireless-2.6-old/drivers/net/wireless/mac80211_hwsim.o In file included from <command-line>:0: /root/compat-wireless-2.6-old/include/net/compat.h:877: error: redefinition of 'list_splice_tail' include/linux/list.h:356: error: previous definition of 'list_splice_tail' was here /root/compat-wireless-2.6-old/include/net/compat.h:892: error: redefinition of 'list_splice_tail_init' include/linux/list.h:379: error: previous definition of 'list_splice_tail_init' was here make[3]: *** [/root/compat-wireless-2.6-old/drivers/net/wireless/mac80211_hwsim.o] Error 1 make[2]: *** [/root/compat-wireless-2.6-old/drivers/net/wireless] Error 2 make[1]: *** [_module_/root/compat-wireless-2.6-old] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.26.6-rt11' make: *** [modules] Error 2 KLIB_BUILD/.config: # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_DMAR=y CONFIG_DMAR_GFX_WA=y CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set CONFIG_HOTPLUG_PCI_SHPC=m # # Networking # CONFIG_NET=y # # Wireless # CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y CONFIG_MAC80211=y # # Rate control algorithm selection # CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_NONE is not set # # Selecting 'y' for an algorithm will # # # build the algorithm into mac80211. # CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set # CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set CONFIG_RFKILL=m CONFIG_RFKILL_INPUT=m CONFIG_RFKILL_LEDS=y # CONFIG_NET_9P is not set # # Device Drivers # # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set CONFIG_IWLWIFI=m CONFIG_IWLCORE=m # CONFIG_IWLWIFI_LEDS is not set CONFIG_IWLWIFI_RFKILL=y # CONFIG_IWL4965 is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # CONFIG_LEDS_CLEVO_MAIL=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- Andrey Vul PS: I'm not subscribed to linux-wireless - CC me when replying. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
