Search Linux Wireless

Re: BCM4312 Fails when xdm is started

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 25 November 2008 06:43:22 Yuval Hager wrote:
> However, I have some few interesting findings. 
> First, this is totally unrelated to b43, but to the PCI. I get the flawed 1's 
> read from lspci even without loading b43.
> 
> I played around with different video drivers and the results are:
> * If using the 'via' driver, I lose the PCIe card immediately upon 
> initialization
> * Using the 'openchrome' (trunk version), It works well in the beginning. 
> After first blanking the register reads are all 1's, and then when the screen 
> is blank I get a different read (some registers are correct, some are wrong), 
> and when the screen is unblanked, I get 0xff's again. Very consistent and 
> predictabe (same read every time).
> * Using the 'vesa' driver I could not recreate the problem. I could not get 
> the screen to blank for some reason, but closing the lid, going on 
> standby/hibernate, restarting X - all didn't matter much to the PCI and the 
> wireless card kept on working.

Ok, then you should report the stuff to the X guys. This is not a b43 problem
and I also don't think it's a kernel problem.

-- 
Greetings Michael.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux