To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the
mac address of the respective interface to REG_MACID or REG_MACID1.
Remove the call to rtl8xxxu_set_mac() from the init function as we set
it in rtl8xxxu_add_interface() later anyway.
Until rtl8xxxu_add_interface() can handle both interfaces, call
rtl8xxxu_set_mac() with port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx>
Reviewed-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 20 +++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 305d6dd585dfa..c2ea8e92cd637 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -3580,15 +3580,25 @@ void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
}
-static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv)
+static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv, int port_num)
{
int i;
u16 reg;
- reg = REG_MACID;
+ switch (port_num) {
+ case 0:
+ reg = REG_MACID;
+ break;
+ case 1:
+ reg = REG_MACID1;
+ break;
+ default:
+ WARN_ONCE("%s: invalid port_num\n", __func__);
+ return -EINVAL;
+ }
for (i = 0; i < ETH_ALEN; i++)
- rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]);
+ rtl8xxxu_write8(priv, reg + i, priv->vifs[port_num]->addr[i]);
return 0;
}
@@ -4243,8 +4253,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
}
- rtl8xxxu_set_mac(priv);
-
/*
* Configure initial WMAC settings
*/
@@ -6619,7 +6627,7 @@ static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
rtl8xxxu_set_linktype(priv, vif->type, 0);
ether_addr_copy(priv->mac_addr, vif->addr);
- rtl8xxxu_set_mac(priv);
+ rtl8xxxu_set_mac(priv, 0);
return ret;
}
--
2.39.2
