As we only want to support AP mode/sending beacons on port 0, change from priv->vif to priv->vifs[0] in the check for AP mode. Additionally, if we are in AP mode, don't filter RX beacon and probe response frames to still allow working STATION mode on the other interface. Signed-off-by: Martin Kaistra <martin.kaistra@xxxxxxxxxxxxx> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 6683ff0f4d8c7..f54d7b1647792 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -6782,8 +6782,8 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw, else rcr |= RCR_CHECK_BSSID_BEACON | RCR_CHECK_BSSID_MATCH; - if (priv->vif && priv->vif->type == NL80211_IFTYPE_AP) - rcr &= ~RCR_CHECK_BSSID_MATCH; + if (priv->vifs[0] && priv->vifs[0]->type == NL80211_IFTYPE_AP) + rcr &= ~(RCR_CHECK_BSSID_MATCH | RCR_CHECK_BSSID_BEACON); if (*total_flags & FIF_CONTROL) rcr |= RCR_ACCEPT_CTRL_FRAME; -- 2.39.2
