The files, drivers/bcma/Kconfig and drivers/ssb/Kconfig, define two helper
config options BCMA_POSSIBLE and SSB_POSSIBLE. Both options are defined
identical:
config {BCMA_POSSIBLE,SSB_POSSIBLE}
bool
depends on HAS_IOMEM && HAS_DMA
default y
While this kind of duplication might still be acceptable in order to have
both sections work independently of each other, it really gets strange when
looking how they are then used in expression where both of those configs
appear. E.g., config B43's dependency is:
(BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA
Note that BCMA_POSSIBLE and SSB_POSSIBLE identical and already have HAS_DMA
as condition, so that is then also another duplication.
Another example is the choice Supported bus types in B43, which already
depends on B43 and hence, we know that HAS_IOMEM && HAS_DMA holds, so all
stated dependencies in the choice are true in all cases.
Given this whole confusion around the use of these two symbols, just remove
them and replace them with the expression they intend to abbreviate.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
---
drivers/bcma/Kconfig | 7 +------
drivers/net/ethernet/broadcom/Kconfig | 4 ++--
drivers/net/wireless/broadcom/b43/Kconfig | 5 +----
drivers/net/wireless/broadcom/b43legacy/Kconfig | 2 +-
drivers/net/wireless/broadcom/brcm80211/Kconfig | 3 +--
drivers/ssb/Kconfig | 7 +------
6 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index b9558ff20830..26bb2a28c7db 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -1,12 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
-config BCMA_POSSIBLE
- bool
- depends on HAS_IOMEM && HAS_DMA
- default y
-
menuconfig BCMA
tristate "Broadcom specific AMBA"
- depends on BCMA_POSSIBLE
+ depends on HAS_IOMEM && HAS_DMA
help
Bus driver for Broadcom specific Advanced Microcontroller Bus
Architecture.
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 75ca3ddda1f5..8abbdb88459c 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_BROADCOM
bool "Broadcom devices"
default y
- depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+ depends on (HAS_IOMEM && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
help
If you have a network (Ethernet) chipset belonging to this class,
@@ -21,7 +21,7 @@ if NET_VENDOR_BROADCOM
config B44
tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE && HAS_DMA
+ depends on HAS_IOMEM && HAS_DMA
select SSB
select MII
select PHYLIB
diff --git a/drivers/net/wireless/broadcom/b43/Kconfig b/drivers/net/wireless/broadcom/b43/Kconfig
index 4559549b80fe..f53eaa8b11cd 100644
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config B43
tristate "Broadcom 43xx wireless support (mac80211 stack)"
- depends on (BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA
+ depends on HAS_IOMEM && HAS_DMA && MAC80211
select BCMA if B43_BCMA
select SSB if B43_SSB
select FW_LOADER
@@ -42,18 +42,15 @@ choice
config B43_BUSES_BCMA_AND_SSB
bool "BCMA and SSB"
- depends on BCMA_POSSIBLE && SSB_POSSIBLE
select B43_BCMA
select B43_SSB
config B43_BUSES_BCMA
bool "BCMA only"
- depends on BCMA_POSSIBLE
select B43_BCMA
config B43_BUSES_SSB
bool "SSB only"
- depends on SSB_POSSIBLE
select B43_SSB
endchoice
diff --git a/drivers/net/wireless/broadcom/b43legacy/Kconfig b/drivers/net/wireless/broadcom/b43legacy/Kconfig
index e4da34ec4f5b..ff11c63b5248 100644
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config B43LEGACY
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
+ depends on HAS_IOMEM && HAS_DMA && MAC80211
select SSB
select FW_LOADER
help
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 3a1a35b5672f..2e1db48201ff 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -4,8 +4,7 @@ config BRCMUTIL
config BRCMSMAC
tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver"
- depends on MAC80211
- depends on BCMA_POSSIBLE
+ depends on HAS_IOMEM && HAS_DMA && MAC80211
select BCMA
select BRCMUTIL
select FW_LOADER
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 1cf1a98952fa..0a6d5a60b5a8 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -1,12 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
-config SSB_POSSIBLE
- bool
- depends on HAS_IOMEM && HAS_DMA
- default y
-
menuconfig SSB
tristate "Sonics Silicon Backplane support"
- depends on SSB_POSSIBLE
+ depends on HAS_IOMEM && HAS_DMA
help
Support for the Sonics Silicon Backplane bus.
You only need to enable this option, if you are
--
2.17.1
