Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by: Zenm Chen <zenmchen@xxxxxxxxx> --- v3: - Put these new USB IDs back into the CONFIG_RTL8XXXU_UNTESTED section as Larry Finger suggested. v2: - Not to put these USB IDs in CONFIG_RTL8XXXU_UNTESTED --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 43ee7592bc6e..180907319e8c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -7961,6 +7961,18 @@ static const struct usb_device_id dev_table[] = { .driver_info = (unsigned long)&rtl8192eu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818c, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8192eu_fops}, +/* D-Link DWA-131 rev C1 */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3312, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +/* TP-Link TL-WN8200ND V2 */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0126, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +/* Mercusys MW300UM */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2c4e, 0x0100, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, +/* Mercusys MW300UH */ +{USB_DEVICE_AND_INTERFACE_INFO(0x2c4e, 0x0104, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8192eu_fops}, #endif { } }; -- 2.43.0
