Some boards come with local-mac-address property. Allow it, and
mac-address as well, to fix dtbs_check warnings like:
apple/t8103-j456.dtb: network@0,0: Unevaluated properties are not allowed ('local-mac-address' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index 4aa521f1be8c..4c8a7950c83e 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -67,6 +67,9 @@ properties:
description: Name for the OOB IRQ, this must be set to "host-wake".
const: host-wake
+ local-mac-address: true
+ mac-address: true
+
brcm,drive-strength:
$ref: /schemas/types.yaml#/definitions/uint32
description: Drive strength used for the SDIO pins on the device in mA.
@@ -148,6 +151,8 @@ examples:
interrupt-parent = <&gpio>;
interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "host-wake";
+ /* To be filled by the bootloader */
+ local-mac-address = [00 00 00 00 00 00];
reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
brcm,ccode-map = "JP-JP-78", "US-Q2-86";
};
--
2.34.1
