[RESEND I've made a mistake with list of recipients]
Update:
I've built and installed mt7601Usta vendor driver, which is shown into lsmod output.
ra0 interface appears as shown in the following output from iwconfig and ifconfig:
ra0 Ralink STA ESSID:""
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ra0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisioni:0 txqueuelen:1000
Byte RX:0 (0.0 B) Byte TX:0 (0.0 B)
The driver is properly loaded and the device doesn't connect/disconnect continuously as instead happens in mainline driver:
Bus 001 Device 007: ID 148f:7601 Ralink Technology, Corp.
|__ Port 3: Dev 7, If 0, Class=vend., Driver=rt2870, 480M
Any thoughts?
Waiting for a reply,
Cristian.
