Merge core.c and base.c
Remove Antenna Diversity (unused now).
Remove unused chainmask handling code.
Comment, indentation scrub.
Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx>
---
drivers/net/wireless/ath9k/Makefile | 3 +-
drivers/net/wireless/ath9k/beacon.c | 80 +--
drivers/net/wireless/ath9k/core.c | 1610 -----------------------------------
drivers/net/wireless/ath9k/core.h | 155 +----
drivers/net/wireless/ath9k/main.c | 1195 +++++++++++++++++++++++++-
drivers/net/wireless/ath9k/rc.c | 9 +-
drivers/net/wireless/ath9k/recv.c | 22 +
drivers/net/wireless/ath9k/xmit.c | 22 +-
8 files changed, 1231 insertions(+), 1865 deletions(-)
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile
index c58cfde..c741e8d 100644
--- a/drivers/net/wireless/ath9k/Makefile
+++ b/drivers/net/wireless/ath9k/Makefile
@@ -9,7 +9,6 @@ ath9k-y += hw.o \
main.o \
recv.o \
xmit.o \
- rc.o \
- core.o
+ rc.o
obj-$(CONFIG_ATH9K) += ath9k.o
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 8b94635..e80d9b9 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -14,13 +14,9 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
- /* Implementation of beacon processing. */
-
#include "core.h"
/*
- * Configure parameters for the beacon queue
- *
* This function will modify certain transmit queue properties depending on
* the operating mode of the station (AP or AdHoc). Parameters are AIFS
* settings and channel width min/max
@@ -54,9 +50,15 @@ static int ath_beaconq_config(struct ath_softc *sc)
}
}
+static void ath_bstuck_process(struct ath_softc *sc)
+{
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "%s: stuck beacon; resetting (bmiss count %u)\n",
+ __func__, sc->sc_bmisscount);
+ ath_reset(sc, false);
+}
+
/*
- * Setup the beacon frame for transmit.
- *
* Associates the beacon frame buffer with a transmit descriptor. Will set
* up all required antenna switch parameters, rate codes, and channel flags.
* Beacons are always sent out at the lowest rate, and are not retried.
@@ -138,14 +140,7 @@ static void ath_beacon_setup(struct ath_softc *sc,
ctsrate, ctsduration, series, 4, 0);
}
-/*
- * Generate beacon frame and queue cab data for a vap.
- *
- * Updates the contents of the beacon frame. It is assumed that the buffer for
- * the beacon frame has been allocated in the ATH object, and simply needs to
- * be filled for this cycle. Also, any CAB (crap after beacon?) traffic will
- * be added to the beacon frame at this point.
-*/
+/* Generate beacon frame and queue cab data for a vap */
static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
{
struct ath_buf *bf;
@@ -275,14 +270,6 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc);
}
-/*
- * Setup a h/w transmit queue for beacons.
- *
- * This function allocates an information structure (struct ath9k_txq_info)
- * on the stack, sets some specific parameters (zero out channel width
- * min/max, and enable aifs). The info structure does not need to be
- * persistant.
-*/
int ath_beaconq_setup(struct ath_hal *ah)
{
struct ath9k_tx_queue_info qi;
@@ -295,14 +282,6 @@ int ath_beaconq_setup(struct ath_hal *ah)
return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
}
-
-/*
- * Allocate and setup an initial beacon frame.
- *
- * Allocate a beacon state variable for a specific VAP instance created on
- * the ATH interface. This routine also calculates the beacon "slot" for
- * staggared beacons in the mBSSID case.
-*/
int ath_beacon_alloc(struct ath_softc *sc, int if_id)
{
struct ieee80211_vif *vif;
@@ -321,7 +300,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
if (!avp->av_bcbuf) {
/* Allocate beacon state for hostap/ibss. We know
* a buffer is available. */
-
avp->av_bcbuf = list_first_entry(&sc->sc_bbuf,
struct ath_buf, list);
list_del(&avp->av_bcbuf->list);
@@ -427,12 +405,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
return 0;
}
-/*
- * Reclaim beacon resources and return buffer to the pool.
- *
- * Checks the VAP to put the beacon frame buffer back to the ATH object
- * queue, and de-allocates any skbs that were sent as CAB traffic.
-*/
void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
{
if (avp->av_bcbuf != NULL) {
@@ -458,13 +430,6 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
}
}
-/*
- * Tasklet for Sending Beacons
- *
- * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame
- * contents are done as needed and the slot time is also adjusted based on
- * current state.
-*/
void ath9k_beacon_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
@@ -481,9 +446,7 @@ void ath9k_beacon_tasklet(unsigned long data)
if (sc->sc_flags & SC_OP_NO_RESET) {
show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
- &rx_clear,
- &rx_frame,
- &tx_frame);
+ &rx_clear, &rx_frame, &tx_frame);
}
/*
@@ -605,9 +568,10 @@ void ath9k_beacon_tasklet(unsigned long data)
if (sc->sc_updateslot == UPDATE) {
sc->sc_updateslot = COMMIT; /* commit next beacon */
sc->sc_slotupdate = slot;
- } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
- ath_setslottime(sc); /* commit change to hardware */
-
+ } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) {
+ ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime);
+ sc->sc_updateslot = OK;
+ }
if (bfaddr != 0) {
/*
* Stop any current dma and put the new frame(s) on the queue.
@@ -630,20 +594,6 @@ void ath9k_beacon_tasklet(unsigned long data)
}
/*
- * Tasklet for Beacon Stuck processing
- *
- * Processing for Beacon Stuck.
- * Basically resets the chip.
-*/
-void ath_bstuck_process(struct ath_softc *sc)
-{
- DPRINTF(sc, ATH_DBG_BEACON,
- "%s: stuck beacon; resetting (bmiss count %u)\n",
- __func__, sc->sc_bmisscount);
- ath_reset(sc, false);
-}
-
-/*
* Configure the beacon and sleep timers.
*
* When operating as an AP this resets the TSF and sets
@@ -886,8 +836,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
}
}
-/* Function to collect beacon rssi data and resync beacon if necessary */
-
void ath_beacon_sync(struct ath_softc *sc, int if_id)
{
/*
diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
index fb6a013..e69de29 100644
--- a/drivers/net/wireless/ath9k/core.c
+++ b/drivers/net/wireless/ath9k/core.c
@@ -1,1610 +0,0 @@
-/*
- * Copyright (c) 2008, Atheros Communications Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "core.h"
-#include "regd.h"
-
-static u32 ath_chainmask_sel_up_rssi_thres =
- ATH_CHAINMASK_SEL_UP_RSSI_THRES;
-static u32 ath_chainmask_sel_down_rssi_thres =
- ATH_CHAINMASK_SEL_DOWN_RSSI_THRES;
-static u32 ath_chainmask_sel_period =
- ATH_CHAINMASK_SEL_TIMEOUT;
-
-/* return bus cachesize in 4B word units */
-
-static void bus_read_cachesize(struct ath_softc *sc, int *csz)
-{
- u8 u8tmp;
-
- pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
- *csz = (int)u8tmp;
-
- /*
- * This check was put in to avoid "unplesant" consequences if
- * the bootrom has not fully initialized all PCI devices.
- * Sometimes the cache line size register is not set
- */
-
- if (*csz == 0)
- *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
-}
-
-static u8 parse_mpdudensity(u8 mpdudensity)
-{
- /*
- * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
- * 0 for no restriction
- * 1 for 1/4 us
- * 2 for 1/2 us
- * 3 for 1 us
- * 4 for 2 us
- * 5 for 4 us
- * 6 for 8 us
- * 7 for 16 us
- */
- switch (mpdudensity) {
- case 0:
- return 0;
- case 1:
- case 2:
- case 3:
- /* Our lower layer calculations limit our precision to
- 1 microsecond */
- return 1;
- case 4:
- return 2;
- case 5:
- return 4;
- case 6:
- return 8;
- case 7:
- return 16;
- default:
- return 0;
- }
-}
-
-/*
- * Set current operating mode
-*/
-static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
-{
- sc->sc_curmode = mode;
- /*
- * All protection frames are transmited at 2Mb/s for
- * 11g, otherwise at 1Mb/s.
- * XXX select protection rate index from rate table.
- */
- sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0);
-}
-
-/*
- * Set up rate table (legacy rates)
- */
-static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
-{
- struct ath_rate_table *rate_table = NULL;
- struct ieee80211_supported_band *sband;
- struct ieee80211_rate *rate;
- int i, maxrates;
-
- switch (band) {
- case IEEE80211_BAND_2GHZ:
- rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
- break;
- case IEEE80211_BAND_5GHZ:
- rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
- break;
- default:
- break;
- }
-
- if (rate_table == NULL)
- return;
-
- sband = &sc->sbands[band];
- rate = sc->rates[band];
-
- if (rate_table->rate_cnt > ATH_RATE_MAX)
- maxrates = ATH_RATE_MAX;
- else
- maxrates = rate_table->rate_cnt;
-
- for (i = 0; i < maxrates; i++) {
- rate[i].bitrate = rate_table->info[i].ratekbps / 100;
- rate[i].hw_value = rate_table->info[i].ratecode;
- sband->n_bitrates++;
- DPRINTF(sc, ATH_DBG_CONFIG,
- "%s: Rate: %2dMbps, ratecode: %2d\n",
- __func__,
- rate[i].bitrate / 10,
- rate[i].hw_value);
- }
-}
-
-/*
- * Set up channel list
- */
-static int ath_setup_channels(struct ath_softc *sc)
-{
- struct ath_hal *ah = sc->sc_ah;
- int nchan, i, a = 0, b = 0;
- u8 regclassids[ATH_REGCLASSIDS_MAX];
- u32 nregclass = 0;
- struct ieee80211_supported_band *band_2ghz;
- struct ieee80211_supported_band *band_5ghz;
- struct ieee80211_channel *chan_2ghz;
- struct ieee80211_channel *chan_5ghz;
- struct ath9k_channel *c;
-
- /* Fill in ah->ah_channels */
- if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan,
- regclassids, ATH_REGCLASSIDS_MAX,
- &nregclass, CTRY_DEFAULT, false, 1)) {
- u32 rd = ah->ah_currentRD;
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to collect channel list; "
- "regdomain likely %u country code %u\n",
- __func__, rd, CTRY_DEFAULT);
- return -EINVAL;
- }
-
- band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ];
- band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ];
- chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ];
- chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ];
-
- for (i = 0; i < nchan; i++) {
- c = &ah->ah_channels[i];
- if (IS_CHAN_2GHZ(c)) {
- chan_2ghz[a].band = IEEE80211_BAND_2GHZ;
- chan_2ghz[a].center_freq = c->channel;
- chan_2ghz[a].max_power = c->maxTxPower;
-
- if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
- chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS;
- if (c->channelFlags & CHANNEL_PASSIVE)
- chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
-
- band_2ghz->n_channels = ++a;
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "%s: 2MHz channel: %d, "
- "channelFlags: 0x%x\n",
- __func__, c->channel, c->channelFlags);
- } else if (IS_CHAN_5GHZ(c)) {
- chan_5ghz[b].band = IEEE80211_BAND_5GHZ;
- chan_5ghz[b].center_freq = c->channel;
- chan_5ghz[b].max_power = c->maxTxPower;
-
- if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
- chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS;
- if (c->channelFlags & CHANNEL_PASSIVE)
- chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
-
- band_5ghz->n_channels = ++b;
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "%s: 5MHz channel: %d, "
- "channelFlags: 0x%x\n",
- __func__, c->channel, c->channelFlags);
- }
- }
-
- return 0;
-}
-
-/*
- * Determine mode from channel flags
- *
- * This routine will provide the enumerated WIRELESSS_MODE value based
- * on the settings of the channel flags. If no valid set of flags
- * exist, the lowest mode (11b) is selected.
-*/
-
-static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan)
-{
- if (chan->chanmode == CHANNEL_A)
- return ATH9K_MODE_11A;
- else if (chan->chanmode == CHANNEL_G)
- return ATH9K_MODE_11G;
- else if (chan->chanmode == CHANNEL_B)
- return ATH9K_MODE_11B;
- else if (chan->chanmode == CHANNEL_A_HT20)
- return ATH9K_MODE_11NA_HT20;
- else if (chan->chanmode == CHANNEL_G_HT20)
- return ATH9K_MODE_11NG_HT20;
- else if (chan->chanmode == CHANNEL_A_HT40PLUS)
- return ATH9K_MODE_11NA_HT40PLUS;
- else if (chan->chanmode == CHANNEL_A_HT40MINUS)
- return ATH9K_MODE_11NA_HT40MINUS;
- else if (chan->chanmode == CHANNEL_G_HT40PLUS)
- return ATH9K_MODE_11NG_HT40PLUS;
- else if (chan->chanmode == CHANNEL_G_HT40MINUS)
- return ATH9K_MODE_11NG_HT40MINUS;
-
- WARN_ON(1); /* should not get here */
-
- return ATH9K_MODE_11B;
-}
-
-/*
- * Set the current channel
- *
- * Set/change channels. If the channel is really being changed, it's done
- * by reseting the chip. To accomplish this we must first cleanup any pending
- * DMA, then restart stuff after a la ath_init.
-*/
-int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
-{
- struct ath_hal *ah = sc->sc_ah;
- bool fastcc = true, stopped;
-
- if (sc->sc_flags & SC_OP_INVALID) /* the device is invalid or removed */
- return -EIO;
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
- __func__,
- ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel,
- sc->sc_ah->ah_curchan->channelFlags),
- sc->sc_ah->ah_curchan->channel,
- ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
- hchan->channel, hchan->channelFlags);
-
- if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
- hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
- (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
- (sc->sc_flags & SC_OP_FULL_RESET)) {
- int status;
- /*
- * This is only performed if the channel settings have
- * actually changed.
- *
- * To switch channels clear any pending DMA operations;
- * wait long enough for the RX fifo to drain, reset the
- * hardware at the new frequency, and then re-enable
- * the relevant bits of the h/w.
- */
- ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */
- ath_draintxq(sc, false); /* clear pending tx frames */
- stopped = ath_stoprecv(sc); /* turn off frame recv */
-
- /* XXX: do not flush receive queue here. We don't want
- * to flush data frames already in queue because of
- * changing channel. */
-
- if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
- fastcc = false;
-
- spin_lock_bh(&sc->sc_resetlock);
- if (!ath9k_hw_reset(ah, hchan,
- sc->sc_ht_info.tx_chan_width,
- sc->sc_tx_chainmask,
- sc->sc_rx_chainmask,
- sc->sc_ht_extprotspacing,
- fastcc, &status)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to reset channel %u (%uMhz) "
- "flags 0x%x hal status %u\n", __func__,
- ath9k_hw_mhz2ieee(ah, hchan->channel,
- hchan->channelFlags),
- hchan->channel, hchan->channelFlags, status);
- spin_unlock_bh(&sc->sc_resetlock);
- return -EIO;
- }
- spin_unlock_bh(&sc->sc_resetlock);
-
- sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
- sc->sc_flags &= ~SC_OP_FULL_RESET;
-
- /* Re-enable rx framework */
- if (ath_startrecv(sc) != 0) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to restart recv logic\n", __func__);
- return -EIO;
- }
- /*
- * Change channels and update the h/w rate map
- * if we're switching; e.g. 11a to 11b/g.
- */
- ath_setcurmode(sc, ath_chan2mode(hchan));
-
- ath_update_txpow(sc); /* update tx power state */
- /*
- * Re-enable interrupts.
- */
- ath9k_hw_set_interrupts(ah, sc->sc_imask);
- }
- return 0;
-}
-
-/**********************/
-/* Chainmask Handling */
-/**********************/
-
-static void ath_chainmask_sel_timertimeout(unsigned long data)
-{
- struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data;
- cm->switch_allowed = 1;
-}
-
-/* Start chainmask select timer */
-static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm)
-{
- cm->switch_allowed = 0;
- mod_timer(&cm->timer, ath_chainmask_sel_period);
-}
-
-/* Stop chainmask select timer */
-static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm)
-{
- cm->switch_allowed = 0;
- del_timer_sync(&cm->timer);
-}
-
-static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an)
-{
- struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
-
- memset(cm, 0, sizeof(struct ath_chainmask_sel));
-
- cm->cur_tx_mask = sc->sc_tx_chainmask;
- cm->cur_rx_mask = sc->sc_rx_chainmask;
- cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER;
- setup_timer(&cm->timer,
- ath_chainmask_sel_timertimeout, (unsigned long) cm);
-}
-
-int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an)
-{
- struct ath_chainmask_sel *cm = &an->an_chainmask_sel;
-
- /*
- * Disable auto-swtiching in one of the following if conditions.
- * sc_chainmask_auto_sel is used for internal global auto-switching
- * enabled/disabled setting
- */
- if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) {
- cm->cur_tx_mask = sc->sc_tx_chainmask;
- return cm->cur_tx_mask;
- }
-
- if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER)
- return cm->cur_tx_mask;
-
- if (cm->switch_allowed) {
- /* Switch down from tx 3 to tx 2. */
- if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 &&
- ATH_RSSI_OUT(cm->tx_avgrssi) >=
- ath_chainmask_sel_down_rssi_thres) {
- cm->cur_tx_mask = sc->sc_tx_chainmask;
-
- /* Don't let another switch happen until
- * this timer expires */
- ath_chainmask_sel_timerstart(cm);
- }
- /* Switch up from tx 2 to 3. */
- else if (cm->cur_tx_mask == sc->sc_tx_chainmask &&
- ATH_RSSI_OUT(cm->tx_avgrssi) <=
- ath_chainmask_sel_up_rssi_thres) {
- cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3;
-
- /* Don't let another switch happen
- * until this timer expires */
- ath_chainmask_sel_timerstart(cm);
- }
- }
-
- return cm->cur_tx_mask;
-}
-
-/*
- * Update tx/rx chainmask. For legacy association,
- * hard code chainmask to 1x1, for 11n association, use
- * the chainmask configuration.
- */
-
-void ath_update_chainmask(struct ath_softc *sc, int is_ht)
-{
- sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
- if (is_ht) {
- sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
- sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
- } else {
- sc->sc_tx_chainmask = 1;
- sc->sc_rx_chainmask = 1;
- }
-
- DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n",
- __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask);
-}
-
-/*******/
-/* ANI */
-/*******/
-
-/*
- * This routine performs the periodic noise floor calibration function
- * that is used to adjust and optimize the chip performance. This
- * takes environmental changes (location, temperature) into account.
- * When the task is complete, it reschedules itself depending on the
- * appropriate interval that was calculated.
- */
-
-static void ath_ani_calibrate(unsigned long data)
-{
- struct ath_softc *sc;
- struct ath_hal *ah;
- bool longcal = false;
- bool shortcal = false;
- bool aniflag = false;
- unsigned int timestamp = jiffies_to_msecs(jiffies);
- u32 cal_interval;
-
- sc = (struct ath_softc *)data;
- ah = sc->sc_ah;
-
- /*
- * don't calibrate when we're scanning.
- * we are most likely not on our home channel.
- */
- if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC)
- return;
-
- /* Long calibration runs independently of short calibration. */
- if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) {
- longcal = true;
- DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n",
- __func__, jiffies);
- sc->sc_ani.sc_longcal_timer = timestamp;
- }
-
- /* Short calibration applies only while sc_caldone is false */
- if (!sc->sc_ani.sc_caldone) {
- if ((timestamp - sc->sc_ani.sc_shortcal_timer) >=
- ATH_SHORT_CALINTERVAL) {
- shortcal = true;
- DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n",
- __func__, jiffies);
- sc->sc_ani.sc_shortcal_timer = timestamp;
- sc->sc_ani.sc_resetcal_timer = timestamp;
- }
- } else {
- if ((timestamp - sc->sc_ani.sc_resetcal_timer) >=
- ATH_RESTART_CALINTERVAL) {
- ath9k_hw_reset_calvalid(ah, ah->ah_curchan,
- &sc->sc_ani.sc_caldone);
- if (sc->sc_ani.sc_caldone)
- sc->sc_ani.sc_resetcal_timer = timestamp;
- }
- }
-
- /* Verify whether we must check ANI */
- if ((timestamp - sc->sc_ani.sc_checkani_timer) >=
- ATH_ANI_POLLINTERVAL) {
- aniflag = true;
- sc->sc_ani.sc_checkani_timer = timestamp;
- }
-
- /* Skip all processing if there's nothing to do. */
- if (longcal || shortcal || aniflag) {
- /* Call ANI routine if necessary */
- if (aniflag)
- ath9k_hw_ani_monitor(ah, &sc->sc_halstats,
- ah->ah_curchan);
-
- /* Perform calibration if necessary */
- if (longcal || shortcal) {
- bool iscaldone = false;
-
- if (ath9k_hw_calibrate(ah, ah->ah_curchan,
- sc->sc_rx_chainmask, longcal,
- &iscaldone)) {
- if (longcal)
- sc->sc_ani.sc_noise_floor =
- ath9k_hw_getchan_noise(ah,
- ah->ah_curchan);
-
- DPRINTF(sc, ATH_DBG_ANI,
- "%s: calibrate chan %u/%x nf: %d\n",
- __func__,
- ah->ah_curchan->channel,
- ah->ah_curchan->channelFlags,
- sc->sc_ani.sc_noise_floor);
- } else {
- DPRINTF(sc, ATH_DBG_ANY,
- "%s: calibrate chan %u/%x failed\n",
- __func__,
- ah->ah_curchan->channel,
- ah->ah_curchan->channelFlags);
- }
- sc->sc_ani.sc_caldone = iscaldone;
- }
- }
-
- /*
- * Set timer interval based on previous results.
- * The interval must be the shortest necessary to satisfy ANI,
- * short calibration and long calibration.
- */
-
- cal_interval = ATH_ANI_POLLINTERVAL;
- if (!sc->sc_ani.sc_caldone)
- cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL);
-
- mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval));
-}
-
-/********/
-/* Core */
-/********/
-
-int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan)
-{
- struct ath_hal *ah = sc->sc_ah;
- int status;
- int error = 0;
-
- DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n",
- __func__, sc->sc_ah->ah_opmode);
-
- /* Reset SERDES registers */
- ath9k_hw_configpcipowersave(ah, 0);
-
- /*
- * The basic interface to setting the hardware in a good
- * state is ``reset''. On return the hardware is known to
- * be powered up and with interrupts disabled. This must
- * be followed by initialization of the appropriate bits
- * and then setup of the interrupt mask.
- */
-
- spin_lock_bh(&sc->sc_resetlock);
- if (!ath9k_hw_reset(ah, initial_chan,
- sc->sc_ht_info.tx_chan_width,
- sc->sc_tx_chainmask, sc->sc_rx_chainmask,
- sc->sc_ht_extprotspacing, false, &status)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to reset hardware; hal status %u "
- "(freq %u flags 0x%x)\n", __func__, status,
- initial_chan->channel, initial_chan->channelFlags);
- error = -EIO;
- spin_unlock_bh(&sc->sc_resetlock);
- goto done;
- }
- spin_unlock_bh(&sc->sc_resetlock);
-
- /*
- * This is needed only to setup initial state
- * but it's best done after a reset.
- */
- ath_update_txpow(sc);
-
- /*
- * Setup the hardware after reset:
- * The receive engine is set going.
- * Frame transmit is handled entirely
- * in the frame output path; there's nothing to do
- * here except setup the interrupt mask.
- */
- if (ath_startrecv(sc) != 0) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to start recv logic\n", __func__);
- error = -EIO;
- goto done;
- }
-
- /* Setup our intr mask. */
- sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX
- | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
- | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
-
- if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
- sc->sc_imask |= ATH9K_INT_GTT;
-
- if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
- sc->sc_imask |= ATH9K_INT_CST;
-
- /*
- * Enable MIB interrupts when there are hardware phy counters.
- * Note we only do this (at the moment) for station mode.
- */
- if (ath9k_hw_phycounters(ah) &&
- ((sc->sc_ah->ah_opmode == ATH9K_M_STA) ||
- (sc->sc_ah->ah_opmode == ATH9K_M_IBSS)))
- sc->sc_imask |= ATH9K_INT_MIB;
- /*
- * Some hardware processes the TIM IE and fires an
- * interrupt when the TIM bit is set. For hardware
- * that does, if not overridden by configuration,
- * enable the TIM interrupt when operating as station.
- */
- if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
- (sc->sc_ah->ah_opmode == ATH9K_M_STA) &&
- !sc->sc_config.swBeaconProcess)
- sc->sc_imask |= ATH9K_INT_TIM;
-
- ath_setcurmode(sc, ath_chan2mode(initial_chan));
-
- sc->sc_flags &= ~SC_OP_INVALID;
-
- /* Disable BMISS interrupt when we're not associated */
- sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
- ath9k_hw_set_interrupts(sc->sc_ah,sc->sc_imask);
-
- ieee80211_wake_queues(sc->hw);
-done:
- return error;
-}
-
-void ath_stop(struct ath_softc *sc)
-{
- struct ath_hal *ah = sc->sc_ah;
-
- DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__);
-
- ieee80211_stop_queues(sc->hw);
-
- /* make sure h/w will not generate any interrupt
- * before setting the invalid flag. */
- ath9k_hw_set_interrupts(ah, 0);
-
- if (!(sc->sc_flags & SC_OP_INVALID)) {
- ath_draintxq(sc, false);
- ath_stoprecv(sc);
- ath9k_hw_phy_disable(ah);
- } else
- sc->sc_rxlink = NULL;
-
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
- cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(sc->sc_ah);
- ath9k_hw_configpcipowersave(sc->sc_ah, 1);
-
- sc->sc_flags |= SC_OP_INVALID;
-}
-
-int ath_reset(struct ath_softc *sc, bool retry_tx)
-{
- struct ath_hal *ah = sc->sc_ah;
- int status;
- int error = 0;
-
- ath9k_hw_set_interrupts(ah, 0);
- ath_draintxq(sc, retry_tx);
- ath_stoprecv(sc);
- ath_flushrecv(sc);
-
- /* Reset chip */
- spin_lock_bh(&sc->sc_resetlock);
- if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan,
- sc->sc_ht_info.tx_chan_width,
- sc->sc_tx_chainmask, sc->sc_rx_chainmask,
- sc->sc_ht_extprotspacing, false, &status)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to reset hardware; hal status %u\n",
- __func__, status);
- error = -EIO;
- }
- spin_unlock_bh(&sc->sc_resetlock);
-
- if (ath_startrecv(sc) != 0)
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to start recv logic\n", __func__);
-
- /*
- * We may be doing a reset in response to a request
- * that changes the channel so update any state that
- * might change as a result.
- */
- ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan));
-
- ath_update_txpow(sc);
-
- if (sc->sc_flags & SC_OP_BEACONS)
- ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */
-
- ath9k_hw_set_interrupts(ah, sc->sc_imask);
-
- /* Restart the txq */
- if (retry_tx) {
- int i;
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
- if (ATH_TXQ_SETUP(sc, i)) {
- spin_lock_bh(&sc->sc_txq[i].axq_lock);
- ath_txq_schedule(sc, &sc->sc_txq[i]);
- spin_unlock_bh(&sc->sc_txq[i].axq_lock);
- }
- }
- }
-
- return error;
-}
-
-/* Interrupt handler. Most of the actual processing is deferred.
- * It's the caller's responsibility to ensure the chip is awake. */
-
-irqreturn_t ath_isr(int irq, void *dev)
-{
- struct ath_softc *sc = dev;
- struct ath_hal *ah = sc->sc_ah;
- enum ath9k_int status;
- bool sched = false;
-
- do {
- if (sc->sc_flags & SC_OP_INVALID) {
- /*
- * The hardware is not ready/present, don't
- * touch anything. Note this can happen early
- * on if the IRQ is shared.
- */
- return IRQ_NONE;
- }
- if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */
- return IRQ_NONE;
- }
-
- /*
- * Figure out the reason(s) for the interrupt. Note
- * that the hal returns a pseudo-ISR that may include
- * bits we haven't explicitly enabled so we mask the
- * value to insure we only process bits we requested.
- */
- ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
-
- status &= sc->sc_imask; /* discard unasked-for bits */
-
- /*
- * If there are no status bits set, then this interrupt was not
- * for me (should have been caught above).
- */
-
- if (!status)
- return IRQ_NONE;
-
- sc->sc_intrstatus = status;
-
- if (status & ATH9K_INT_FATAL) {
- /* need a chip reset */
- sched = true;
- } else if (status & ATH9K_INT_RXORN) {
- /* need a chip reset */
- sched = true;
- } else {
- if (status & ATH9K_INT_SWBA) {
- /* schedule a tasklet for beacon handling */
- tasklet_schedule(&sc->bcon_tasklet);
- }
- if (status & ATH9K_INT_RXEOL) {
- /*
- * NB: the hardware should re-read the link when
- * RXE bit is written, but it doesn't work
- * at least on older hardware revs.
- */
- sched = true;
- }
-
- if (status & ATH9K_INT_TXURN)
- /* bump tx trigger level */
- ath9k_hw_updatetxtriglevel(ah, true);
- /* XXX: optimize this */
- if (status & ATH9K_INT_RX)
- sched = true;
- if (status & ATH9K_INT_TX)
- sched = true;
- if (status & ATH9K_INT_BMISS)
- sched = true;
- /* carrier sense timeout */
- if (status & ATH9K_INT_CST)
- sched = true;
- if (status & ATH9K_INT_MIB) {
- /*
- * Disable interrupts until we service the MIB
- * interrupt; otherwise it will continue to
- * fire.
- */
- ath9k_hw_set_interrupts(ah, 0);
- /*
- * Let the hal handle the event. We assume
- * it will clear whatever condition caused
- * the interrupt.
- */
- ath9k_hw_procmibevent(ah, &sc->sc_halstats);
- ath9k_hw_set_interrupts(ah, sc->sc_imask);
- }
- if (status & ATH9K_INT_TIM_TIMER) {
- if (!(ah->ah_caps.hw_caps &
- ATH9K_HW_CAP_AUTOSLEEP)) {
- /* Clear RxAbort bit so that we can
- * receive frames */
- ath9k_hw_setrxabort(ah, 0);
- sched = true;
- }
- }
- }
- } while (0);
-
- if (sched) {
- /* turn off every interrupt except SWBA */
- ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA));
- tasklet_schedule(&sc->intr_tq);
- }
-
- return IRQ_HANDLED;
-}
-
-/* Deferred interrupt processing */
-
-static void ath9k_tasklet(unsigned long data)
-{
- struct ath_softc *sc = (struct ath_softc *)data;
- u32 status = sc->sc_intrstatus;
-
- if (status & ATH9K_INT_FATAL) {
- /* need a chip reset */
- ath_reset(sc, false);
- return;
- } else {
-
- if (status &
- (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
- /* XXX: fill me in */
- /*
- if (status & ATH9K_INT_RXORN) {
- }
- if (status & ATH9K_INT_RXEOL) {
- }
- */
- spin_lock_bh(&sc->sc_rxflushlock);
- ath_rx_tasklet(sc, 0);
- spin_unlock_bh(&sc->sc_rxflushlock);
- }
- /* XXX: optimize this */
- if (status & ATH9K_INT_TX)
- ath_tx_tasklet(sc);
- /* XXX: fill me in */
- /*
- if (status & ATH9K_INT_BMISS) {
- }
- if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) {
- if (status & ATH9K_INT_TIM) {
- }
- if (status & ATH9K_INT_DTIMSYNC) {
- }
- }
- */
- }
-
- /* re-enable hardware interrupt */
- ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
-}
-
-int ath_init(u16 devid, struct ath_softc *sc)
-{
- struct ath_hal *ah = NULL;
- int status;
- int error = 0, i;
- int csz = 0;
-
- /* XXX: hardware will not be ready until ath_open() being called */
- sc->sc_flags |= SC_OP_INVALID;
- sc->sc_debug = DBG_DEFAULT;
-
- spin_lock_init(&sc->sc_resetlock);
- tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
- tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
- (unsigned long)sc);
-
- /*
- * Cache line size is used to size and align various
- * structures used to communicate with the hardware.
- */
- bus_read_cachesize(sc, &csz);
- /* XXX assert csz is non-zero */
- sc->sc_cachelsz = csz << 2; /* convert to bytes */
-
- ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
- if (ah == NULL) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to attach hardware; HAL status %u\n",
- __func__, status);
- error = -ENXIO;
- goto bad;
- }
- sc->sc_ah = ah;
-
- /* Get the hardware key cache size. */
- sc->sc_keymax = ah->ah_caps.keycache_size;
- if (sc->sc_keymax > ATH_KEYMAX) {
- DPRINTF(sc, ATH_DBG_KEYCACHE,
- "%s: Warning, using only %u entries in %u key cache\n",
- __func__, ATH_KEYMAX, sc->sc_keymax);
- sc->sc_keymax = ATH_KEYMAX;
- }
-
- /*
- * Reset the key cache since some parts do not
- * reset the contents on initial power up.
- */
- for (i = 0; i < sc->sc_keymax; i++)
- ath9k_hw_keyreset(ah, (u16) i);
- /*
- * Mark key cache slots associated with global keys
- * as in use. If we knew TKIP was not to be used we
- * could leave the +32, +64, and +32+64 slots free.
- * XXX only for splitmic.
- */
- for (i = 0; i < IEEE80211_WEP_NKID; i++) {
- set_bit(i, sc->sc_keymap);
- set_bit(i + 32, sc->sc_keymap);
- set_bit(i + 64, sc->sc_keymap);
- set_bit(i + 32 + 64, sc->sc_keymap);
- }
-
- /* Collect the channel list using the default country code */
-
- error = ath_setup_channels(sc);
- if (error)
- goto bad;
-
- /* default to MONITOR mode */
- sc->sc_ah->ah_opmode = ATH9K_M_MONITOR;
-
- /* Setup rate tables */
-
- ath_rate_attach(sc);
- ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
- ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
-
- /*
- * Allocate hardware transmit queues: one queue for
- * beacon frames and one data queue for each QoS
- * priority. Note that the hal handles reseting
- * these queues at the needed time.
- */
- sc->sc_bhalq = ath_beaconq_setup(ah);
- if (sc->sc_bhalq == -1) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup a beacon xmit queue\n", __func__);
- error = -EIO;
- goto bad2;
- }
- sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
- if (sc->sc_cabq == NULL) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup CAB xmit queue\n", __func__);
- error = -EIO;
- goto bad2;
- }
-
- sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
- ath_cabq_update(sc);
-
- for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++)
- sc->sc_haltype2q[i] = -1;
-
- /* Setup data queues */
- /* NB: ensure BK queue is the lowest priority h/w queue */
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup xmit queue for BK traffic\n",
- __func__);
- error = -EIO;
- goto bad2;
- }
-
- if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup xmit queue for BE traffic\n",
- __func__);
- error = -EIO;
- goto bad2;
- }
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup xmit queue for VI traffic\n",
- __func__);
- error = -EIO;
- goto bad2;
- }
- if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "%s: unable to setup xmit queue for VO traffic\n",
- __func__);
- error = -EIO;
- goto bad2;
- }
-
- /* Initializes the noise floor to a reasonable default value.
- * Later on this will be updated during ANI processing. */
-
- sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR;
- setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc);
-
- if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_TKIP, NULL)) {
- /*
- * Whether we should enable h/w TKIP MIC.
- * XXX: if we don't support WME TKIP MIC, then we wouldn't
- * report WMM capable, so it's always safe to turn on
- * TKIP MIC in this case.
- */
- ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
- 0, 1, NULL);
- }
-
- /*
- * Check whether the separate key cache entries
- * are required to handle both tx+rx MIC keys.
- * With split mic keys the number of stations is limited
- * to 27 otherwise 59.
- */
- if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_TKIP, NULL)
- && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
- ATH9K_CIPHER_MIC, NULL)
- && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
- 0, NULL))
- sc->sc_splitmic = 1;
-
- /* turn on mcast key search if possible */
- if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
- (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
- 1, NULL);
-
- sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
- sc->sc_config.txpowlimit_override = 0;
-
- /* 11n Capabilities */
- if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
- sc->sc_flags |= SC_OP_TXAGGR;
- sc->sc_flags |= SC_OP_RXAGGR;
- }
-
- sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
- sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
-
- ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
- sc->sc_defant = ath9k_hw_getdefantenna(ah);
-
- ath9k_hw_getmac(ah, sc->sc_myaddr);
- if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
- ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
- ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
- ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
- }
-
- sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
-
- /* initialize beacon slots */
- for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++)
- sc->sc_bslot[i] = ATH_IF_ID_ANY;
-
- /* save MISC configurations */
- sc->sc_config.swBeaconProcess = 1;
-
-#ifdef CONFIG_SLOW_ANT_DIV
- /* range is 40 - 255, we use something in the middle */
- ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127);
-#endif
-
- /* setup channels and rates */
-
- sc->sbands[IEEE80211_BAND_2GHZ].channels =
- sc->channels[IEEE80211_BAND_2GHZ];
- sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
- sc->rates[IEEE80211_BAND_2GHZ];
- sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-
- if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_5GHZ].channels =
- sc->channels[IEEE80211_BAND_5GHZ];
- sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
- sc->rates[IEEE80211_BAND_5GHZ];
- sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
- }
-
- return 0;
-bad2:
- /* cleanup tx queues */
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i))
- ath_tx_cleanupq(sc, &sc->sc_txq[i]);
-bad:
- if (ah)
- ath9k_hw_detach(ah);
-
- return error;
-}
-
-/*******************/
-/* Node Management */
-/*******************/
-
-void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
-{
- struct ath_node *an;
-
- an = (struct ath_node *)sta->drv_priv;
-
- if (sc->sc_flags & SC_OP_TXAGGR)
- ath_tx_node_init(sc, an);
-
- an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
- sta->ht_cap.ampdu_factor);
- an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
-
- ath_chainmask_sel_init(sc, an);
- ath_chainmask_sel_timerstart(&an->an_chainmask_sel);
-}
-
-void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
-{
- struct ath_node *an = (struct ath_node *)sta->drv_priv;
-
- ath_chainmask_sel_timerstop(&an->an_chainmask_sel);
-
- if (sc->sc_flags & SC_OP_TXAGGR)
- ath_tx_node_cleanup(sc, an);
-}
-
-/*
- * Set up New Node
- *
- * Setup driver-specific state for a newly associated node. This routine
- * really only applies if compression or XR are enabled, there is no code
- * covering any other cases.
-*/
-
-void ath_newassoc(struct ath_softc *sc,
- struct ath_node *an, int isnew, int isuapsd)
-{
- int tidno;
-
- /* if station reassociates, tear down the aggregation state. */
- if (!isnew) {
- for (tidno = 0; tidno < WME_NUM_TID; tidno++) {
- if (sc->sc_flags & SC_OP_TXAGGR)
- ath_tx_aggr_teardown(sc, an, tidno);
- }
- }
-}
-
-/**************/
-/* Encryption */
-/**************/
-
-void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot)
-{
- ath9k_hw_keyreset(sc->sc_ah, keyix);
- if (freeslot)
- clear_bit(keyix, sc->sc_keymap);
-}
-
-int ath_keyset(struct ath_softc *sc,
- u16 keyix,
- struct ath9k_keyval *hk,
- const u8 mac[ETH_ALEN])
-{
- bool status;
-
- status = ath9k_hw_set_keycache_entry(sc->sc_ah,
- keyix, hk, mac, false);
-
- return status != false;
-}
-
-/***********************/
-/* TX Power/Regulatory */
-/***********************/
-
-/*
- * Set Transmit power in HAL
- *
- * This routine makes the actual HAL calls to set the new transmit power
- * limit.
-*/
-
-void ath_update_txpow(struct ath_softc *sc)
-{
- struct ath_hal *ah = sc->sc_ah;
- u32 txpow;
-
- if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
- ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
- /* read back in case value is clamped */
- ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
- sc->sc_curtxpow = txpow;
- }
-}
-
-/**************************/
-/* Slow Antenna Diversity */
-/**************************/
-
-void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
- struct ath_softc *sc,
- int32_t rssitrig)
-{
- int trig;
-
- /* antdivf_rssitrig can range from 40 - 0xff */
- trig = (rssitrig > 0xff) ? 0xff : rssitrig;
- trig = (rssitrig < 40) ? 40 : rssitrig;
-
- antdiv->antdiv_sc = sc;
- antdiv->antdivf_rssitrig = trig;
-}
-
-void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
- u8 num_antcfg,
- const u8 *bssid)
-{
- antdiv->antdiv_num_antcfg =
- num_antcfg < ATH_ANT_DIV_MAX_CFG ?
- num_antcfg : ATH_ANT_DIV_MAX_CFG;
- antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
- antdiv->antdiv_curcfg = 0;
- antdiv->antdiv_bestcfg = 0;
- antdiv->antdiv_laststatetsf = 0;
-
- memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid));
-
- antdiv->antdiv_start = 1;
-}
-
-void ath_slow_ant_div_stop(struct ath_antdiv *antdiv)
-{
- antdiv->antdiv_start = 0;
-}
-
-static int32_t ath_find_max_val(int32_t *val,
- u8 num_val, u8 *max_index)
-{
- u32 MaxVal = *val++;
- u32 cur_index = 0;
-
- *max_index = 0;
- while (++cur_index < num_val) {
- if (*val > MaxVal) {
- MaxVal = *val;
- *max_index = cur_index;
- }
-
- val++;
- }
-
- return MaxVal;
-}
-
-void ath_slow_ant_div(struct ath_antdiv *antdiv,
- struct ieee80211_hdr *hdr,
- struct ath_rx_status *rx_stats)
-{
- struct ath_softc *sc = antdiv->antdiv_sc;
- struct ath_hal *ah = sc->sc_ah;
- u64 curtsf = 0;
- u8 bestcfg, curcfg = antdiv->antdiv_curcfg;
- __le16 fc = hdr->frame_control;
-
- if (antdiv->antdiv_start && ieee80211_is_beacon(fc)
- && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) {
- antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi;
- antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah);
- curtsf = antdiv->antdiv_lastbtsf[curcfg];
- } else {
- return;
- }
-
- switch (antdiv->antdiv_state) {
- case ATH_ANT_DIV_IDLE:
- if ((antdiv->antdiv_lastbrssi[curcfg] <
- antdiv->antdivf_rssitrig)
- && ((curtsf - antdiv->antdiv_laststatetsf) >
- ATH_ANT_DIV_MIN_IDLE_US)) {
-
- curcfg++;
- if (curcfg == antdiv->antdiv_num_antcfg)
- curcfg = 0;
-
- if (!ath9k_hw_select_antconfig(ah, curcfg)) {
- antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg;
- antdiv->antdiv_curcfg = curcfg;
- antdiv->antdiv_laststatetsf = curtsf;
- antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
- }
- }
- break;
-
- case ATH_ANT_DIV_SCAN:
- if ((curtsf - antdiv->antdiv_laststatetsf) <
- ATH_ANT_DIV_MIN_SCAN_US)
- break;
-
- curcfg++;
- if (curcfg == antdiv->antdiv_num_antcfg)
- curcfg = 0;
-
- if (curcfg == antdiv->antdiv_bestcfg) {
- ath_find_max_val(antdiv->antdiv_lastbrssi,
- antdiv->antdiv_num_antcfg, &bestcfg);
- if (!ath9k_hw_select_antconfig(ah, bestcfg)) {
- antdiv->antdiv_bestcfg = bestcfg;
- antdiv->antdiv_curcfg = bestcfg;
- antdiv->antdiv_laststatetsf = curtsf;
- antdiv->antdiv_state = ATH_ANT_DIV_IDLE;
- }
- } else {
- if (!ath9k_hw_select_antconfig(ah, curcfg)) {
- antdiv->antdiv_curcfg = curcfg;
- antdiv->antdiv_laststatetsf = curtsf;
- antdiv->antdiv_state = ATH_ANT_DIV_SCAN;
- }
- }
-
- break;
- }
-}
-
-/***********************/
-/* Descriptor Handling */
-/***********************/
-
-/*
- * Set up DMA descriptors
- *
- * This function will allocate both the DMA descriptor structure, and the
- * buffers it contains. These are used to contain the descriptors used
- * by the system.
-*/
-
-int ath_descdma_setup(struct ath_softc *sc,
- struct ath_descdma *dd,
- struct list_head *head,
- const char *name,
- int nbuf,
- int ndesc)
-{
-#define DS2PHYS(_dd, _ds) \
- ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
-#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
-#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
-
- struct ath_desc *ds;
- struct ath_buf *bf;
- int i, bsize, error;
-
- DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n",
- __func__, name, nbuf, ndesc);
-
- /* ath_desc must be a multiple of DWORDs */
- if ((sizeof(struct ath_desc) % 4) != 0) {
- DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n",
- __func__);
- ASSERT((sizeof(struct ath_desc) % 4) == 0);
- error = -ENOMEM;
- goto fail;
- }
-
- dd->dd_name = name;
- dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
-
- /*
- * Need additional DMA memory because we can't use
- * descriptors that cross the 4K page boundary. Assume
- * one skipped descriptor per 4K page.
- */
- if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
- u32 ndesc_skipped =
- ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
- u32 dma_len;
-
- while (ndesc_skipped) {
- dma_len = ndesc_skipped * sizeof(struct ath_desc);
- dd->dd_desc_len += dma_len;
-
- ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
- };
- }
-
- /* allocate descriptors */
- dd->dd_desc = pci_alloc_consistent(sc->pdev,
- dd->dd_desc_len,
- &dd->dd_desc_paddr);
- if (dd->dd_desc == NULL) {
- error = -ENOMEM;
- goto fail;
- }
- ds = dd->dd_desc;
- DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n",
- __func__, dd->dd_name, ds, (u32) dd->dd_desc_len,
- ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
-
- /* allocate buffers */
- bsize = sizeof(struct ath_buf) * nbuf;
- bf = kmalloc(bsize, GFP_KERNEL);
- if (bf == NULL) {
- error = -ENOMEM;
- goto fail2;
- }
- memset(bf, 0, bsize);
- dd->dd_bufptr = bf;
-
- INIT_LIST_HEAD(head);
- for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
-
- if (!(sc->sc_ah->ah_caps.hw_caps &
- ATH9K_HW_CAP_4KB_SPLITTRANS)) {
- /*
- * Skip descriptor addresses which can cause 4KB
- * boundary crossing (addr + length) with a 32 dword
- * descriptor fetch.
- */
- while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
- ASSERT((caddr_t) bf->bf_desc <
- ((caddr_t) dd->dd_desc +
- dd->dd_desc_len));
-
- ds += ndesc;
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
- }
- }
- list_add_tail(&bf->list, head);
- }
- return 0;
-fail2:
- pci_free_consistent(sc->pdev,
- dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
-fail:
- memset(dd, 0, sizeof(*dd));
- return error;
-#undef ATH_DESC_4KB_BOUND_CHECK
-#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
-#undef DS2PHYS
-}
-
-/*
- * Cleanup DMA descriptors
- *
- * This function will free the DMA block that was allocated for the descriptor
- * pool. Since this was allocated as one "chunk", it is freed in the same
- * manner.
-*/
-
-void ath_descdma_cleanup(struct ath_softc *sc,
- struct ath_descdma *dd,
- struct list_head *head)
-{
- /* Free memory associated with descriptors */
- pci_free_consistent(sc->pdev,
- dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
-
- INIT_LIST_HEAD(head);
- kfree(dd->dd_bufptr);
- memset(dd, 0, sizeof(*dd));
-}
-
-/*************/
-/* Utilities */
-/*************/
-
-int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
-{
- int qnum;
-
- switch (queue) {
- case 0:
- qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO];
- break;
- case 1:
- qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI];
- break;
- case 2:
- qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
- break;
- case 3:
- qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK];
- break;
- default:
- qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
- break;
- }
-
- return qnum;
-}
-
-int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
-{
- int qnum;
-
- switch (queue) {
- case ATH9K_WME_AC_VO:
- qnum = 0;
- break;
- case ATH9K_WME_AC_VI:
- qnum = 1;
- break;
- case ATH9K_WME_AC_BE:
- qnum = 2;
- break;
- case ATH9K_WME_AC_BK:
- qnum = 3;
- break;
- default:
- qnum = -1;
- break;
- }
-
- return qnum;
-}
-
-
-/*
- * Expand time stamp to TSF
- *
- * Extend 15-bit time stamp from rx descriptor to
- * a full 64-bit TSF using the current h/w TSF.
-*/
-
-u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
-{
- u64 tsf;
-
- tsf = ath9k_hw_gettsf64(sc->sc_ah);
- if ((tsf & 0x7fff) < rstamp)
- tsf -= 0x8000;
- return (tsf & ~0x7fff) | rstamp;
-}
-
-/*
- * Set Default Antenna
- *
- * Call into the HAL to set the default antenna to use. Not really valid for
- * MIMO technology.
-*/
-
-void ath_setdefantenna(void *context, u32 antenna)
-{
- struct ath_softc *sc = (struct ath_softc *)context;
- struct ath_hal *ah = sc->sc_ah;
-
- /* XXX block beacon interrupts */
- ath9k_hw_setantenna(ah, antenna);
- sc->sc_defant = antenna;
- sc->sc_rxotherant = 0;
-}
-
-/*
- * Set Slot Time
- *
- * This will wake up the chip if required, and set the slot time for the
- * frame (maximum transmit time). Slot time is assumed to be already set
- * in the ATH object member sc_slottime
-*/
-
-void ath_setslottime(struct ath_softc *sc)
-{
- ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime);
- sc->sc_updateslot = OK;
-}
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index e672556..21ee0c2 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -47,10 +47,6 @@
struct ath_node;
-/******************/
-/* Utility macros */
-/******************/
-
/* Macro to expand scalars to 64-bit objects */
#define ito64(x) (sizeof(x) == 8) ? \
@@ -86,11 +82,6 @@ struct ath_node;
#define ATH_TXQ_SETUP(sc, i) ((sc)->sc_txqsetup & (1<<i))
-static inline unsigned long get_timestamp(void)
-{
- return ((jiffies / HZ) * 1000) + (jiffies % HZ) * (1000 / HZ);
-}
-
static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
/*************/
@@ -141,34 +132,6 @@ struct ath_config {
u8 swBeaconProcess; /* Process received beacons in SW (vs HW) */
};
-/***********************/
-/* Chainmask Selection */
-/***********************/
-
-#define ATH_CHAINMASK_SEL_TIMEOUT 6000
-/* Default - Number of last RSSI values that is used for
- * chainmask selection */
-#define ATH_CHAINMASK_SEL_RSSI_CNT 10
-/* Means use 3x3 chainmask instead of configured chainmask */
-#define ATH_CHAINMASK_SEL_3X3 7
-/* Default - Rssi threshold below which we have to switch to 3x3 */
-#define ATH_CHAINMASK_SEL_UP_RSSI_THRES 20
-/* Default - Rssi threshold above which we have to switch to
- * user configured values */
-#define ATH_CHAINMASK_SEL_DOWN_RSSI_THRES 35
-/* Struct to store the chainmask select related info */
-struct ath_chainmask_sel {
- struct timer_list timer;
- int cur_tx_mask; /* user configured or 3x3 */
- int cur_rx_mask; /* user configured or 3x3 */
- int tx_avgrssi;
- u8 switch_allowed:1, /* timer will set this */
- cm_sel_enabled : 1;
-};
-
-int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an);
-void ath_update_chainmask(struct ath_softc *sc, int is_ht);
-
/*************************/
/* Descriptor Management */
/*************************/
@@ -240,7 +203,6 @@ struct ath_buf {
an aggregate) */
struct ath_buf *bf_lastfrm; /* last buf of this frame */
struct ath_buf *bf_next; /* next subframe in the aggregate */
- struct ath_buf *bf_rifslast; /* last buf for RIFS burst */
void *bf_mpdu; /* enclosing frame structure */
struct ath_desc *bf_desc; /* virtual addr of desc */
dma_addr_t bf_daddr; /* physical addr of desc */
@@ -278,16 +240,10 @@ struct ath_descdma {
dma_addr_t dd_dmacontext;
};
-int ath_descdma_setup(struct ath_softc *sc,
- struct ath_descdma *dd,
- struct list_head *head,
- const char *name,
- int nbuf,
- int ndesc);
-int ath_desc_alloc(struct ath_softc *sc);
-void ath_desc_free(struct ath_softc *sc);
-void ath_descdma_cleanup(struct ath_softc *sc,
- struct ath_descdma *dd,
+int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
+ struct list_head *head, const char *name,
+ int nbuf, int ndesc);
+void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
struct list_head *head);
/***********/
@@ -452,7 +408,6 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb,
void ath_tx_tasklet(struct ath_softc *sc);
u32 ath_txq_depth(struct ath_softc *sc, int qnum);
u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum);
-void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth);
void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb);
/**********************/
@@ -517,25 +472,18 @@ struct ath_node_aggr {
/* driver-specific node state */
struct ath_node {
struct ath_softc *an_sc;
- struct ath_chainmask_sel an_chainmask_sel;
struct ath_node_aggr an_aggr;
u16 maxampdu;
u8 mpdudensity;
};
-void ath_tx_resume_tid(struct ath_softc *sc,
- struct ath_atx_tid *tid);
+void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid);
bool ath_tx_aggr_check(struct ath_softc *sc, struct ath_node *an, u8 tidno);
-void ath_tx_aggr_teardown(struct ath_softc *sc,
- struct ath_node *an, u8 tidno);
+void ath_tx_aggr_teardown(struct ath_softc *sc, struct ath_node *an, u8 tidno);
int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn);
int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
-void ath_newassoc(struct ath_softc *sc,
- struct ath_node *node, int isnew, int isuapsd);
-void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta);
-void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta);
/********/
/* VAPs */
@@ -593,49 +541,8 @@ void ath9k_beacon_tasklet(unsigned long data);
void ath_beacon_config(struct ath_softc *sc, int if_id);
int ath_beaconq_setup(struct ath_hal *ah);
int ath_beacon_alloc(struct ath_softc *sc, int if_id);
-void ath_bstuck_process(struct ath_softc *sc);
void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp);
void ath_beacon_sync(struct ath_softc *sc, int if_id);
-void ath_get_beaconconfig(struct ath_softc *sc,
- int if_id,
- struct ath_beacon_config *conf);
-/*********************/
-/* Antenna diversity */
-/*********************/
-
-#define ATH_ANT_DIV_MAX_CFG 2
-#define ATH_ANT_DIV_MIN_IDLE_US 1000000 /* us */
-#define ATH_ANT_DIV_MIN_SCAN_US 50000 /* us */
-
-enum ATH_ANT_DIV_STATE{
- ATH_ANT_DIV_IDLE,
- ATH_ANT_DIV_SCAN, /* evaluating antenna */
-};
-
-struct ath_antdiv {
- struct ath_softc *antdiv_sc;
- u8 antdiv_start;
- enum ATH_ANT_DIV_STATE antdiv_state;
- u8 antdiv_num_antcfg;
- u8 antdiv_curcfg;
- u8 antdiv_bestcfg;
- int32_t antdivf_rssitrig;
- int32_t antdiv_lastbrssi[ATH_ANT_DIV_MAX_CFG];
- u64 antdiv_lastbtsf[ATH_ANT_DIV_MAX_CFG];
- u64 antdiv_laststatetsf;
- u8 antdiv_bssid[ETH_ALEN];
-};
-
-void ath_slow_ant_div_init(struct ath_antdiv *antdiv,
- struct ath_softc *sc, int32_t rssitrig);
-void ath_slow_ant_div_start(struct ath_antdiv *antdiv,
- u8 num_antcfg,
- const u8 *bssid);
-void ath_slow_ant_div_stop(struct ath_antdiv *antdiv);
-void ath_slow_ant_div(struct ath_antdiv *antdiv,
- struct ieee80211_hdr *wh,
- struct ath_rx_status *rx_stats);
-void ath_setdefantenna(void *sc, u32 antenna);
/*******/
/* ANI */
@@ -717,30 +624,8 @@ struct ath_rfkill {
#define ATH_IF_ID_ANY 0xff
#define ATH_TXPOWER_MAX 100 /* .5 dBm units */
-
-#define RSSI_LPF_THRESHOLD -20
-#define ATH_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */
-#define ATH_RATE_DUMMY_MARKER 0
-#define ATH_RSSI_LPF_LEN 10
-#define ATH_RSSI_DUMMY_MARKER 0x127
-
-#define ATH_EP_MUL(x, mul) ((x) * (mul))
-#define ATH_EP_RND(x, mul) \
- ((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
-#define ATH_RSSI_OUT(x) \
- (((x) != ATH_RSSI_DUMMY_MARKER) ? \
- (ATH_EP_RND((x), ATH_RSSI_EP_MULTIPLIER)) : ATH_RSSI_DUMMY_MARKER)
-#define ATH_RSSI_IN(x) \
- (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
-#define ATH_LPF_RSSI(x, y, len) \
- ((x != ATH_RSSI_DUMMY_MARKER) ? \
- (((x) * ((len) - 1) + (y)) / (len)) : (y))
-#define ATH_RSSI_LPF(x, y) do { \
- if ((y) >= RSSI_LPF_THRESHOLD) \
- x = ATH_LPF_RSSI((x), \
- ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \
- } while (0)
-
+#define ATH_RSSI_DUMMY_MARKER 0x127
+#define ATH_RATE_DUMMY_MARKER 0
enum PROT_MODE {
PROT_M_NONE = 0,
@@ -748,12 +633,6 @@ enum PROT_MODE {
PROT_M_CTSONLY
};
-enum RATE_TYPE {
- NORMAL_RATE = 0,
- HALF_RATE,
- QUARTER_RATE
-};
-
struct ath_ht_info {
enum ath9k_ht_macmode tx_chan_width;
u8 ext_chan_offset;
@@ -881,27 +760,9 @@ struct ath_softc {
struct ath_ani sc_ani;
};
-int ath_init(u16 devid, struct ath_softc *sc);
-int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan);
-void ath_stop(struct ath_softc *sc);
-irqreturn_t ath_isr(int irq, void *dev);
int ath_reset(struct ath_softc *sc, bool retry_tx);
-int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan);
-
-/*********************/
-/* Utility Functions */
-/*********************/
-
-void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot);
-int ath_keyset(struct ath_softc *sc,
- u16 keyix,
- struct ath9k_keyval *hk,
- const u8 mac[ETH_ALEN]);
int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
-void ath_setslottime(struct ath_softc *sc);
-void ath_update_txpow(struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
-u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp);
#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 27be0d9..8eccc20 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -14,8 +14,6 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-/* mac80211 and PCI callbacks */
-
#include <linux/nl80211.h>
#include "core.h"
#include "reg.h"
@@ -40,6 +38,580 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = {
static void ath_detach(struct ath_softc *sc);
+/* return bus cachesize in 4B word units */
+
+static void bus_read_cachesize(struct ath_softc *sc, int *csz)
+{
+ u8 u8tmp;
+
+ pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
+ *csz = (int)u8tmp;
+
+ /*
+ * This check was put in to avoid "unplesant" consequences if
+ * the bootrom has not fully initialized all PCI devices.
+ * Sometimes the cache line size register is not set
+ */
+
+ if (*csz == 0)
+ *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
+}
+
+static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
+{
+ sc->sc_curmode = mode;
+ /*
+ * All protection frames are transmited at 2Mb/s for
+ * 11g, otherwise at 1Mb/s.
+ * XXX select protection rate index from rate table.
+ */
+ sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0);
+}
+
+static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan)
+{
+ if (chan->chanmode == CHANNEL_A)
+ return ATH9K_MODE_11A;
+ else if (chan->chanmode == CHANNEL_G)
+ return ATH9K_MODE_11G;
+ else if (chan->chanmode == CHANNEL_B)
+ return ATH9K_MODE_11B;
+ else if (chan->chanmode == CHANNEL_A_HT20)
+ return ATH9K_MODE_11NA_HT20;
+ else if (chan->chanmode == CHANNEL_G_HT20)
+ return ATH9K_MODE_11NG_HT20;
+ else if (chan->chanmode == CHANNEL_A_HT40PLUS)
+ return ATH9K_MODE_11NA_HT40PLUS;
+ else if (chan->chanmode == CHANNEL_A_HT40MINUS)
+ return ATH9K_MODE_11NA_HT40MINUS;
+ else if (chan->chanmode == CHANNEL_G_HT40PLUS)
+ return ATH9K_MODE_11NG_HT40PLUS;
+ else if (chan->chanmode == CHANNEL_G_HT40MINUS)
+ return ATH9K_MODE_11NG_HT40MINUS;
+
+ WARN_ON(1); /* should not get here */
+
+ return ATH9K_MODE_11B;
+}
+
+static void ath_update_txpow(struct ath_softc *sc)
+{
+ struct ath_hal *ah = sc->sc_ah;
+ u32 txpow;
+
+ if (sc->sc_curtxpow != sc->sc_config.txpowlimit) {
+ ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit);
+ /* read back in case value is clamped */
+ ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow);
+ sc->sc_curtxpow = txpow;
+ }
+}
+
+static u8 parse_mpdudensity(u8 mpdudensity)
+{
+ /*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ * 0 for no restriction
+ * 1 for 1/4 us
+ * 2 for 1/2 us
+ * 3 for 1 us
+ * 4 for 2 us
+ * 5 for 4 us
+ * 6 for 8 us
+ * 7 for 16 us
+ */
+ switch (mpdudensity) {
+ case 0:
+ return 0;
+ case 1:
+ case 2:
+ case 3:
+ /* Our lower layer calculations limit our precision to
+ 1 microsecond */
+ return 1;
+ case 4:
+ return 2;
+ case 5:
+ return 4;
+ case 6:
+ return 8;
+ case 7:
+ return 16;
+ default:
+ return 0;
+ }
+}
+
+static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
+{
+ struct ath_rate_table *rate_table = NULL;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_rate *rate;
+ int i, maxrates;
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
+ break;
+ case IEEE80211_BAND_5GHZ:
+ rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
+ break;
+ default:
+ break;
+ }
+
+ if (rate_table == NULL)
+ return;
+
+ sband = &sc->sbands[band];
+ rate = sc->rates[band];
+
+ if (rate_table->rate_cnt > ATH_RATE_MAX)
+ maxrates = ATH_RATE_MAX;
+ else
+ maxrates = rate_table->rate_cnt;
+
+ for (i = 0; i < maxrates; i++) {
+ rate[i].bitrate = rate_table->info[i].ratekbps / 100;
+ rate[i].hw_value = rate_table->info[i].ratecode;
+ sband->n_bitrates++;
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: Rate: %2dMbps, ratecode: %2d\n",
+ __func__, rate[i].bitrate / 10, rate[i].hw_value);
+ }
+}
+
+static int ath_setup_channels(struct ath_softc *sc)
+{
+ struct ath_hal *ah = sc->sc_ah;
+ int nchan, i, a = 0, b = 0;
+ u8 regclassids[ATH_REGCLASSIDS_MAX];
+ u32 nregclass = 0;
+ struct ieee80211_supported_band *band_2ghz;
+ struct ieee80211_supported_band *band_5ghz;
+ struct ieee80211_channel *chan_2ghz;
+ struct ieee80211_channel *chan_5ghz;
+ struct ath9k_channel *c;
+
+ /* Fill in ah->ah_channels */
+ if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan,
+ regclassids, ATH_REGCLASSIDS_MAX,
+ &nregclass, CTRY_DEFAULT, false, 1)) {
+ u32 rd = ah->ah_currentRD;
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to collect channel list; "
+ "regdomain likely %u country code %u\n",
+ __func__, rd, CTRY_DEFAULT);
+ return -EINVAL;
+ }
+
+ band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ];
+ band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ];
+ chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ];
+ chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ];
+
+ for (i = 0; i < nchan; i++) {
+ c = &ah->ah_channels[i];
+ if (IS_CHAN_2GHZ(c)) {
+ chan_2ghz[a].band = IEEE80211_BAND_2GHZ;
+ chan_2ghz[a].center_freq = c->channel;
+ chan_2ghz[a].max_power = c->maxTxPower;
+
+ if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+ chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS;
+ if (c->channelFlags & CHANNEL_PASSIVE)
+ chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ band_2ghz->n_channels = ++a;
+
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: 2MHz channel: %d, "
+ "channelFlags: 0x%x\n",
+ __func__, c->channel, c->channelFlags);
+ } else if (IS_CHAN_5GHZ(c)) {
+ chan_5ghz[b].band = IEEE80211_BAND_5GHZ;
+ chan_5ghz[b].center_freq = c->channel;
+ chan_5ghz[b].max_power = c->maxTxPower;
+
+ if (c->privFlags & CHANNEL_DISALLOW_ADHOC)
+ chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS;
+ if (c->channelFlags & CHANNEL_PASSIVE)
+ chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ band_5ghz->n_channels = ++b;
+
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: 5MHz channel: %d, "
+ "channelFlags: 0x%x\n",
+ __func__, c->channel, c->channelFlags);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Set/change channels. If the channel is really being changed, it's done
+ * by reseting the chip. To accomplish this we must first cleanup any pending
+ * DMA, then restart stuff.
+*/
+static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
+{
+ struct ath_hal *ah = sc->sc_ah;
+ bool fastcc = true, stopped;
+
+ if (sc->sc_flags & SC_OP_INVALID)
+ return -EIO;
+
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
+ __func__,
+ ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel,
+ sc->sc_ah->ah_curchan->channelFlags),
+ sc->sc_ah->ah_curchan->channel,
+ ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
+ hchan->channel, hchan->channelFlags);
+
+ if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
+ hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
+ (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
+ (sc->sc_flags & SC_OP_FULL_RESET)) {
+ int status;
+ /*
+ * This is only performed if the channel settings have
+ * actually changed.
+ *
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */
+ ath_draintxq(sc, false); /* clear pending tx frames */
+ stopped = ath_stoprecv(sc); /* turn off frame recv */
+
+ /* XXX: do not flush receive queue here. We don't want
+ * to flush data frames already in queue because of
+ * changing channel. */
+
+ if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
+ fastcc = false;
+
+ spin_lock_bh(&sc->sc_resetlock);
+ if (!ath9k_hw_reset(ah, hchan, sc->sc_ht_info.tx_chan_width,
+ sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+ sc->sc_ht_extprotspacing, fastcc, &status)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to reset channel %u (%uMhz) "
+ "flags 0x%x hal status %u\n", __func__,
+ ath9k_hw_mhz2ieee(ah, hchan->channel,
+ hchan->channelFlags),
+ hchan->channel, hchan->channelFlags, status);
+ spin_unlock_bh(&sc->sc_resetlock);
+ return -EIO;
+ }
+ spin_unlock_bh(&sc->sc_resetlock);
+
+ sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
+ sc->sc_flags &= ~SC_OP_FULL_RESET;
+
+ if (ath_startrecv(sc) != 0) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to restart recv logic\n", __func__);
+ return -EIO;
+ }
+
+ ath_setcurmode(sc, ath_chan2mode(hchan));
+ ath_update_txpow(sc);
+ ath9k_hw_set_interrupts(ah, sc->sc_imask);
+ }
+ return 0;
+}
+
+/*
+ * This routine performs the periodic noise floor calibration function
+ * that is used to adjust and optimize the chip performance. This
+ * takes environmental changes (location, temperature) into account.
+ * When the task is complete, it reschedules itself depending on the
+ * appropriate interval that was calculated.
+ */
+static void ath_ani_calibrate(unsigned long data)
+{
+ struct ath_softc *sc;
+ struct ath_hal *ah;
+ bool longcal = false;
+ bool shortcal = false;
+ bool aniflag = false;
+ unsigned int timestamp = jiffies_to_msecs(jiffies);
+ u32 cal_interval;
+
+ sc = (struct ath_softc *)data;
+ ah = sc->sc_ah;
+
+ /*
+ * don't calibrate when we're scanning.
+ * we are most likely not on our home channel.
+ */
+ if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC)
+ return;
+
+ /* Long calibration runs independently of short calibration. */
+ if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) {
+ longcal = true;
+ DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n",
+ __func__, jiffies);
+ sc->sc_ani.sc_longcal_timer = timestamp;
+ }
+
+ /* Short calibration applies only while sc_caldone is false */
+ if (!sc->sc_ani.sc_caldone) {
+ if ((timestamp - sc->sc_ani.sc_shortcal_timer) >=
+ ATH_SHORT_CALINTERVAL) {
+ shortcal = true;
+ DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n",
+ __func__, jiffies);
+ sc->sc_ani.sc_shortcal_timer = timestamp;
+ sc->sc_ani.sc_resetcal_timer = timestamp;
+ }
+ } else {
+ if ((timestamp - sc->sc_ani.sc_resetcal_timer) >=
+ ATH_RESTART_CALINTERVAL) {
+ ath9k_hw_reset_calvalid(ah, ah->ah_curchan,
+ &sc->sc_ani.sc_caldone);
+ if (sc->sc_ani.sc_caldone)
+ sc->sc_ani.sc_resetcal_timer = timestamp;
+ }
+ }
+
+ /* Verify whether we must check ANI */
+ if ((timestamp - sc->sc_ani.sc_checkani_timer) >=
+ ATH_ANI_POLLINTERVAL) {
+ aniflag = true;
+ sc->sc_ani.sc_checkani_timer = timestamp;
+ }
+
+ /* Skip all processing if there's nothing to do. */
+ if (longcal || shortcal || aniflag) {
+ /* Call ANI routine if necessary */
+ if (aniflag)
+ ath9k_hw_ani_monitor(ah, &sc->sc_halstats,
+ ah->ah_curchan);
+
+ /* Perform calibration if necessary */
+ if (longcal || shortcal) {
+ bool iscaldone = false;
+
+ if (ath9k_hw_calibrate(ah, ah->ah_curchan,
+ sc->sc_rx_chainmask, longcal,
+ &iscaldone)) {
+ if (longcal)
+ sc->sc_ani.sc_noise_floor =
+ ath9k_hw_getchan_noise(ah,
+ ah->ah_curchan);
+
+ DPRINTF(sc, ATH_DBG_ANI,
+ "%s: calibrate chan %u/%x nf: %d\n",
+ __func__,
+ ah->ah_curchan->channel,
+ ah->ah_curchan->channelFlags,
+ sc->sc_ani.sc_noise_floor);
+ } else {
+ DPRINTF(sc, ATH_DBG_ANY,
+ "%s: calibrate chan %u/%x failed\n",
+ __func__,
+ ah->ah_curchan->channel,
+ ah->ah_curchan->channelFlags);
+ }
+ sc->sc_ani.sc_caldone = iscaldone;
+ }
+ }
+
+ /*
+ * Set timer interval based on previous results.
+ * The interval must be the shortest necessary to satisfy ANI,
+ * short calibration and long calibration.
+ */
+
+ cal_interval = ATH_ANI_POLLINTERVAL;
+ if (!sc->sc_ani.sc_caldone)
+ cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL);
+
+ mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval));
+}
+
+/*
+ * Update tx/rx chainmask. For legacy association,
+ * hard code chainmask to 1x1, for 11n association, use
+ * the chainmask configuration.
+ */
+static void ath_update_chainmask(struct ath_softc *sc, int is_ht)
+{
+ sc->sc_flags |= SC_OP_CHAINMASK_UPDATE;
+ if (is_ht) {
+ sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask;
+ sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask;
+ } else {
+ sc->sc_tx_chainmask = 1;
+ sc->sc_rx_chainmask = 1;
+ }
+
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n",
+ __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask);
+}
+
+static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
+{
+ struct ath_node *an;
+
+ an = (struct ath_node *)sta->drv_priv;
+
+ if (sc->sc_flags & SC_OP_TXAGGR)
+ ath_tx_node_init(sc, an);
+
+ an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+ sta->ht_cap.ampdu_factor);
+ an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+}
+
+static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
+{
+ struct ath_node *an = (struct ath_node *)sta->drv_priv;
+
+ if (sc->sc_flags & SC_OP_TXAGGR)
+ ath_tx_node_cleanup(sc, an);
+}
+
+static void ath9k_tasklet(unsigned long data)
+{
+ struct ath_softc *sc = (struct ath_softc *)data;
+ u32 status = sc->sc_intrstatus;
+
+ if (status & ATH9K_INT_FATAL) {
+ /* need a chip reset */
+ ath_reset(sc, false);
+ return;
+ } else {
+
+ if (status &
+ (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) {
+ spin_lock_bh(&sc->sc_rxflushlock);
+ ath_rx_tasklet(sc, 0);
+ spin_unlock_bh(&sc->sc_rxflushlock);
+ }
+ /* XXX: optimize this */
+ if (status & ATH9K_INT_TX)
+ ath_tx_tasklet(sc);
+ }
+
+ /* re-enable hardware interrupt */
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+}
+
+static irqreturn_t ath_isr(int irq, void *dev)
+{
+ struct ath_softc *sc = dev;
+ struct ath_hal *ah = sc->sc_ah;
+ enum ath9k_int status;
+ bool sched = false;
+
+ do {
+ if (sc->sc_flags & SC_OP_INVALID) {
+ /*
+ * The hardware is not ready/present, don't
+ * touch anything. Note this can happen early
+ * on if the IRQ is shared.
+ */
+ return IRQ_NONE;
+ }
+ if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */
+ return IRQ_NONE;
+ }
+
+ /*
+ * Figure out the reason(s) for the interrupt. Note
+ * that the hal returns a pseudo-ISR that may include
+ * bits we haven't explicitly enabled so we mask the
+ * value to insure we only process bits we requested.
+ */
+ ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
+
+ status &= sc->sc_imask; /* discard unasked-for bits */
+
+ /*
+ * If there are no status bits set, then this interrupt was not
+ * for me (should have been caught above).
+ */
+ if (!status)
+ return IRQ_NONE;
+
+ sc->sc_intrstatus = status;
+
+ if (status & ATH9K_INT_FATAL) {
+ /* need a chip reset */
+ sched = true;
+ } else if (status & ATH9K_INT_RXORN) {
+ /* need a chip reset */
+ sched = true;
+ } else {
+ if (status & ATH9K_INT_SWBA) {
+ /* schedule a tasklet for beacon handling */
+ tasklet_schedule(&sc->bcon_tasklet);
+ }
+ if (status & ATH9K_INT_RXEOL) {
+ /*
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work
+ * at least on older hardware revs.
+ */
+ sched = true;
+ }
+
+ if (status & ATH9K_INT_TXURN)
+ /* bump tx trigger level */
+ ath9k_hw_updatetxtriglevel(ah, true);
+ /* XXX: optimize this */
+ if (status & ATH9K_INT_RX)
+ sched = true;
+ if (status & ATH9K_INT_TX)
+ sched = true;
+ if (status & ATH9K_INT_BMISS)
+ sched = true;
+ /* carrier sense timeout */
+ if (status & ATH9K_INT_CST)
+ sched = true;
+ if (status & ATH9K_INT_MIB) {
+ /*
+ * Disable interrupts until we service the MIB
+ * interrupt; otherwise it will continue to
+ * fire.
+ */
+ ath9k_hw_set_interrupts(ah, 0);
+ /*
+ * Let the hal handle the event. We assume
+ * it will clear whatever condition caused
+ * the interrupt.
+ */
+ ath9k_hw_procmibevent(ah, &sc->sc_halstats);
+ ath9k_hw_set_interrupts(ah, sc->sc_imask);
+ }
+ if (status & ATH9K_INT_TIM_TIMER) {
+ if (!(ah->ah_caps.hw_caps &
+ ATH9K_HW_CAP_AUTOSLEEP)) {
+ /* Clear RxAbort bit so that we can
+ * receive frames */
+ ath9k_hw_setrxabort(ah, 0);
+ sched = true;
+ }
+ }
+ }
+ } while (0);
+
+ if (sched) {
+ /* turn off every interrupt except SWBA */
+ ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA));
+ tasklet_schedule(&sc->intr_tq);
+ }
+
+ return IRQ_HANDLED;
+}
+
static int ath_get_channel(struct ath_softc *sc,
struct ieee80211_channel *chan)
{
@@ -90,6 +662,23 @@ static u32 ath_get_extchanmode(struct ath_softc *sc,
return chanmode;
}
+static void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot)
+{
+ ath9k_hw_keyreset(sc->sc_ah, keyix);
+ if (freeslot)
+ clear_bit(keyix, sc->sc_keymap);
+}
+
+static int ath_keyset(struct ath_softc *sc, u16 keyix,
+ struct ath9k_keyval *hk, const u8 mac[ETH_ALEN])
+{
+ bool status;
+
+ status = ath9k_hw_set_keycache_entry(sc->sc_ah,
+ keyix, hk, mac, false);
+
+ return status != false;
+}
static int ath_setkey_tkip(struct ath_softc *sc,
struct ieee80211_key_conf *key,
@@ -328,20 +917,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
}
}
-void ath_get_beaconconfig(struct ath_softc *sc,
- int if_id,
- struct ath_beacon_config *conf)
-{
- struct ieee80211_hw *hw = sc->hw;
-
- /* fill in beacon config data */
-
- conf->beacon_interval = hw->conf.beacon_int;
- conf->listen_interval = 100;
- conf->dtim_count = 1;
- conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval;
-}
-
/********************************/
/* LED functions */
/********************************/
@@ -723,6 +1298,244 @@ static void ath_detach(struct ath_softc *sc)
ath9k_hw_detach(sc->sc_ah);
}
+static int ath_init(u16 devid, struct ath_softc *sc)
+{
+ struct ath_hal *ah = NULL;
+ int status;
+ int error = 0, i;
+ int csz = 0;
+
+ /* XXX: hardware will not be ready until ath_open() being called */
+ sc->sc_flags |= SC_OP_INVALID;
+ sc->sc_debug = DBG_DEFAULT;
+
+ spin_lock_init(&sc->sc_resetlock);
+ tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
+ tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
+ (unsigned long)sc);
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ bus_read_cachesize(sc, &csz);
+ /* XXX assert csz is non-zero */
+ sc->sc_cachelsz = csz << 2; /* convert to bytes */
+
+ ah = ath9k_hw_attach(devid, sc, sc->mem, &status);
+ if (ah == NULL) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to attach hardware; HAL status %u\n",
+ __func__, status);
+ error = -ENXIO;
+ goto bad;
+ }
+ sc->sc_ah = ah;
+
+ /* Get the hardware key cache size. */
+ sc->sc_keymax = ah->ah_caps.keycache_size;
+ if (sc->sc_keymax > ATH_KEYMAX) {
+ DPRINTF(sc, ATH_DBG_KEYCACHE,
+ "%s: Warning, using only %u entries in %u key cache\n",
+ __func__, ATH_KEYMAX, sc->sc_keymax);
+ sc->sc_keymax = ATH_KEYMAX;
+ }
+
+ /*
+ * Reset the key cache since some parts do not
+ * reset the contents on initial power up.
+ */
+ for (i = 0; i < sc->sc_keymax; i++)
+ ath9k_hw_keyreset(ah, (u16) i);
+ /*
+ * Mark key cache slots associated with global keys
+ * as in use. If we knew TKIP was not to be used we
+ * could leave the +32, +64, and +32+64 slots free.
+ * XXX only for splitmic.
+ */
+ for (i = 0; i < IEEE80211_WEP_NKID; i++) {
+ set_bit(i, sc->sc_keymap);
+ set_bit(i + 32, sc->sc_keymap);
+ set_bit(i + 64, sc->sc_keymap);
+ set_bit(i + 32 + 64, sc->sc_keymap);
+ }
+
+ /* Collect the channel list using the default country code */
+
+ error = ath_setup_channels(sc);
+ if (error)
+ goto bad;
+
+ /* default to MONITOR mode */
+ sc->sc_ah->ah_opmode = ATH9K_M_MONITOR;
+
+ /* Setup rate tables */
+
+ ath_rate_attach(sc);
+ ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
+ ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that the hal handles reseting
+ * these queues at the needed time.
+ */
+ sc->sc_bhalq = ath_beaconq_setup(ah);
+ if (sc->sc_bhalq == -1) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup a beacon xmit queue\n", __func__);
+ error = -EIO;
+ goto bad2;
+ }
+ sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
+ if (sc->sc_cabq == NULL) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup CAB xmit queue\n", __func__);
+ error = -EIO;
+ goto bad2;
+ }
+
+ sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME;
+ ath_cabq_update(sc);
+
+ for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++)
+ sc->sc_haltype2q[i] = -1;
+
+ /* Setup data queues */
+ /* NB: ensure BK queue is the lowest priority h/w queue */
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup xmit queue for BK traffic\n",
+ __func__);
+ error = -EIO;
+ goto bad2;
+ }
+
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup xmit queue for BE traffic\n",
+ __func__);
+ error = -EIO;
+ goto bad2;
+ }
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup xmit queue for VI traffic\n",
+ __func__);
+ error = -EIO;
+ goto bad2;
+ }
+ if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to setup xmit queue for VO traffic\n",
+ __func__);
+ error = -EIO;
+ goto bad2;
+ }
+
+ /* Initializes the noise floor to a reasonable default value.
+ * Later on this will be updated during ANI processing. */
+
+ sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+ setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc);
+
+ if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_TKIP, NULL)) {
+ /*
+ * Whether we should enable h/w TKIP MIC.
+ * XXX: if we don't support WME TKIP MIC, then we wouldn't
+ * report WMM capable, so it's always safe to turn on
+ * TKIP MIC in this case.
+ */
+ ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC,
+ 0, 1, NULL);
+ }
+
+ /*
+ * Check whether the separate key cache entries
+ * are required to handle both tx+rx MIC keys.
+ * With split mic keys the number of stations is limited
+ * to 27 otherwise 59.
+ */
+ if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_TKIP, NULL)
+ && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
+ ATH9K_CIPHER_MIC, NULL)
+ && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
+ 0, NULL))
+ sc->sc_splitmic = 1;
+
+ /* turn on mcast key search if possible */
+ if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
+ (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1,
+ 1, NULL);
+
+ sc->sc_config.txpowlimit = ATH_TXPOWER_MAX;
+ sc->sc_config.txpowlimit_override = 0;
+
+ /* 11n Capabilities */
+ if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+ sc->sc_flags |= SC_OP_TXAGGR;
+ sc->sc_flags |= SC_OP_RXAGGR;
+ }
+
+ sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask;
+ sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask;
+
+ ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
+ sc->sc_defant = ath9k_hw_getdefantenna(ah);
+
+ ath9k_hw_getmac(ah, sc->sc_myaddr);
+ if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) {
+ ath9k_hw_getbssidmask(ah, sc->sc_bssidmask);
+ ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask);
+ ath9k_hw_setbssidmask(ah, sc->sc_bssidmask);
+ }
+
+ sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */
+
+ /* initialize beacon slots */
+ for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++)
+ sc->sc_bslot[i] = ATH_IF_ID_ANY;
+
+ /* save MISC configurations */
+ sc->sc_config.swBeaconProcess = 1;
+
+#ifdef CONFIG_SLOW_ANT_DIV
+ /* range is 40 - 255, we use something in the middle */
+ ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127);
+#endif
+
+ /* setup channels and rates */
+
+ sc->sbands[IEEE80211_BAND_2GHZ].channels =
+ sc->channels[IEEE80211_BAND_2GHZ];
+ sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
+ sc->rates[IEEE80211_BAND_2GHZ];
+ sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+
+ if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
+ sc->sbands[IEEE80211_BAND_5GHZ].channels =
+ sc->channels[IEEE80211_BAND_5GHZ];
+ sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+ sc->rates[IEEE80211_BAND_5GHZ];
+ sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
+ }
+
+ return 0;
+bad2:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+bad:
+ if (ah)
+ ath9k_hw_detach(ah);
+
+ return error;
+}
+
static int ath_attach(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
@@ -811,11 +1624,243 @@ bad:
return error;
}
+int ath_reset(struct ath_softc *sc, bool retry_tx)
+{
+ struct ath_hal *ah = sc->sc_ah;
+ int status;
+ int error = 0;
+
+ ath9k_hw_set_interrupts(ah, 0);
+ ath_draintxq(sc, retry_tx);
+ ath_stoprecv(sc);
+ ath_flushrecv(sc);
+
+ spin_lock_bh(&sc->sc_resetlock);
+ if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan,
+ sc->sc_ht_info.tx_chan_width,
+ sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+ sc->sc_ht_extprotspacing, false, &status)) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to reset hardware; hal status %u\n",
+ __func__, status);
+ error = -EIO;
+ }
+ spin_unlock_bh(&sc->sc_resetlock);
+
+ if (ath_startrecv(sc) != 0)
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to start recv logic\n", __func__);
+
+ /*
+ * We may be doing a reset in response to a request
+ * that changes the channel so update any state that
+ * might change as a result.
+ */
+ ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan));
+
+ ath_update_txpow(sc);
+
+ if (sc->sc_flags & SC_OP_BEACONS)
+ ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */
+
+ ath9k_hw_set_interrupts(ah, sc->sc_imask);
+
+ if (retry_tx) {
+ int i;
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (ATH_TXQ_SETUP(sc, i)) {
+ spin_lock_bh(&sc->sc_txq[i].axq_lock);
+ ath_txq_schedule(sc, &sc->sc_txq[i]);
+ spin_unlock_bh(&sc->sc_txq[i].axq_lock);
+ }
+ }
+ }
+
+ return error;
+}
+
+/*
+ * This function will allocate both the DMA descriptor structure, and the
+ * buffers it contains. These are used to contain the descriptors used
+ * by the system.
+*/
+int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
+ struct list_head *head, const char *name,
+ int nbuf, int ndesc)
+{
+#define DS2PHYS(_dd, _ds) \
+ ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
+#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
+#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
+
+ struct ath_desc *ds;
+ struct ath_buf *bf;
+ int i, bsize, error;
+
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n",
+ __func__, name, nbuf, ndesc);
+
+ /* ath_desc must be a multiple of DWORDs */
+ if ((sizeof(struct ath_desc) % 4) != 0) {
+ DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n",
+ __func__);
+ ASSERT((sizeof(struct ath_desc) % 4) == 0);
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ dd->dd_name = name;
+ dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc;
+
+ /*
+ * Need additional DMA memory because we can't use
+ * descriptors that cross the 4K page boundary. Assume
+ * one skipped descriptor per 4K page.
+ */
+ if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ u32 ndesc_skipped =
+ ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len);
+ u32 dma_len;
+
+ while (ndesc_skipped) {
+ dma_len = ndesc_skipped * sizeof(struct ath_desc);
+ dd->dd_desc_len += dma_len;
+
+ ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len);
+ };
+ }
+
+ /* allocate descriptors */
+ dd->dd_desc = pci_alloc_consistent(sc->pdev,
+ dd->dd_desc_len,
+ &dd->dd_desc_paddr);
+ if (dd->dd_desc == NULL) {
+ error = -ENOMEM;
+ goto fail;
+ }
+ ds = dd->dd_desc;
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n",
+ __func__, dd->dd_name, ds, (u32) dd->dd_desc_len,
+ ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+
+ /* allocate buffers */
+ bsize = sizeof(struct ath_buf) * nbuf;
+ bf = kmalloc(bsize, GFP_KERNEL);
+ if (bf == NULL) {
+ error = -ENOMEM;
+ goto fail2;
+ }
+ memset(bf, 0, bsize);
+ dd->dd_bufptr = bf;
+
+ INIT_LIST_HEAD(head);
+ for (i = 0; i < nbuf; i++, bf++, ds += ndesc) {
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+
+ if (!(sc->sc_ah->ah_caps.hw_caps &
+ ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ /*
+ * Skip descriptor addresses which can cause 4KB
+ * boundary crossing (addr + length) with a 32 dword
+ * descriptor fetch.
+ */
+ while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+ ASSERT((caddr_t) bf->bf_desc <
+ ((caddr_t) dd->dd_desc +
+ dd->dd_desc_len));
+
+ ds += ndesc;
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+ }
+ }
+ list_add_tail(&bf->list, head);
+ }
+ return 0;
+fail2:
+ pci_free_consistent(sc->pdev,
+ dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+fail:
+ memset(dd, 0, sizeof(*dd));
+ return error;
+#undef ATH_DESC_4KB_BOUND_CHECK
+#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED
+#undef DS2PHYS
+}
+
+void ath_descdma_cleanup(struct ath_softc *sc,
+ struct ath_descdma *dd,
+ struct list_head *head)
+{
+ pci_free_consistent(sc->pdev,
+ dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr);
+
+ INIT_LIST_HEAD(head);
+ kfree(dd->dd_bufptr);
+ memset(dd, 0, sizeof(*dd));
+}
+
+int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
+{
+ int qnum;
+
+ switch (queue) {
+ case 0:
+ qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO];
+ break;
+ case 1:
+ qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI];
+ break;
+ case 2:
+ qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+ break;
+ case 3:
+ qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK];
+ break;
+ default:
+ qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE];
+ break;
+ }
+
+ return qnum;
+}
+
+int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
+{
+ int qnum;
+
+ switch (queue) {
+ case ATH9K_WME_AC_VO:
+ qnum = 0;
+ break;
+ case ATH9K_WME_AC_VI:
+ qnum = 1;
+ break;
+ case ATH9K_WME_AC_BE:
+ qnum = 2;
+ break;
+ case ATH9K_WME_AC_BK:
+ qnum = 3;
+ break;
+ default:
+ qnum = -1;
+ break;
+ }
+
+ return qnum;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
static int ath9k_start(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ieee80211_channel *curchan = hw->conf.channel;
- int error = 0, pos;
+ struct ath9k_channel *init_channel;
+ int error = 0, pos, status;
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with "
"initial channel: %d MHz\n", __func__, curchan->center_freq);
@@ -828,24 +1873,103 @@ static int ath9k_start(struct ieee80211_hw *hw)
if (pos == -1) {
DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
error = -EINVAL;
- goto exit;
+ goto error;
}
sc->sc_ah->ah_channels[pos].chanmode =
(curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
+ init_channel = &sc->sc_ah->ah_channels[pos];
- error = ath_open(sc, &sc->sc_ah->ah_channels[pos]);
- if (error) {
+ /* Reset SERDES registers */
+ ath9k_hw_configpcipowersave(sc->sc_ah, 0);
+
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ spin_lock_bh(&sc->sc_resetlock);
+ if (!ath9k_hw_reset(sc->sc_ah, init_channel,
+ sc->sc_ht_info.tx_chan_width,
+ sc->sc_tx_chainmask, sc->sc_rx_chainmask,
+ sc->sc_ht_extprotspacing, false, &status)) {
DPRINTF(sc, ATH_DBG_FATAL,
- "%s: Unable to complete ath_open\n", __func__);
- goto exit;
+ "%s: unable to reset hardware; hal status %u "
+ "(freq %u flags 0x%x)\n", __func__, status,
+ init_channel->channel, init_channel->channelFlags);
+ error = -EIO;
+ spin_unlock_bh(&sc->sc_resetlock);
+ goto error;
}
+ spin_unlock_bh(&sc->sc_resetlock);
+
+ /*
+ * This is needed only to setup initial state
+ * but it's best done after a reset.
+ */
+ ath_update_txpow(sc);
+
+ /*
+ * Setup the hardware after reset:
+ * The receive engine is set going.
+ * Frame transmit is handled entirely
+ * in the frame output path; there's nothing to do
+ * here except setup the interrupt mask.
+ */
+ if (ath_startrecv(sc) != 0) {
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "%s: unable to start recv logic\n", __func__);
+ error = -EIO;
+ goto error;
+ }
+
+ /* Setup our intr mask. */
+ sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX
+ | ATH9K_INT_RXEOL | ATH9K_INT_RXORN
+ | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
+
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT)
+ sc->sc_imask |= ATH9K_INT_GTT;
+
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+ sc->sc_imask |= ATH9K_INT_CST;
+
+ /*
+ * Enable MIB interrupts when there are hardware phy counters.
+ * Note we only do this (at the moment) for station mode.
+ */
+ if (ath9k_hw_phycounters(sc->sc_ah) &&
+ ((sc->sc_ah->ah_opmode == ATH9K_M_STA) ||
+ (sc->sc_ah->ah_opmode == ATH9K_M_IBSS)))
+ sc->sc_imask |= ATH9K_INT_MIB;
+ /*
+ * Some hardware processes the TIM IE and fires an
+ * interrupt when the TIM bit is set. For hardware
+ * that does, if not overridden by configuration,
+ * enable the TIM interrupt when operating as station.
+ */
+ if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) &&
+ (sc->sc_ah->ah_opmode == ATH9K_M_STA) &&
+ !sc->sc_config.swBeaconProcess)
+ sc->sc_imask |= ATH9K_INT_TIM;
+
+ ath_setcurmode(sc, ath_chan2mode(init_channel));
+
+ sc->sc_flags &= ~SC_OP_INVALID;
+
+ /* Disable BMISS interrupt when we're not associated */
+ sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
+
+ ieee80211_wake_queues(sc->hw);
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
error = ath_start_rfkill_poll(sc);
#endif
-exit:
+error:
return error;
}
@@ -912,7 +2036,30 @@ static void ath9k_stop(struct ieee80211_hw *hw)
return;
}
- ath_stop(sc);
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__);
+
+ ieee80211_stop_queues(sc->hw);
+
+ /* make sure h/w will not generate any interrupt
+ * before setting the invalid flag. */
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+
+ if (!(sc->sc_flags & SC_OP_INVALID)) {
+ ath_draintxq(sc, false);
+ ath_stoprecv(sc);
+ ath9k_hw_phy_disable(sc->sc_ah);
+ } else
+ sc->sc_rxlink = NULL;
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+ cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
+#endif
+ /* disable HAL and put h/w to sleep */
+ ath9k_hw_disable(sc->sc_ah);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+
+ sc->sc_flags |= SC_OP_INVALID;
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__);
}
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 7d1913d..93dfea8 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1401,7 +1401,6 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
struct ath_softc *sc = priv;
struct ath_rate_priv *ath_rc_priv = priv_sta;
struct ath_tx_info_priv *tx_info_priv = NULL;
- struct ath_node *an;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr;
int final_ts_idx, tx_status = 0, is_underrun = 0;
@@ -1410,21 +1409,15 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
hdr = (struct ieee80211_hdr *)skb->data;
fc = hdr->frame_control;
tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
- an = (struct ath_node *)sta->drv_priv;
final_ts_idx = tx_info_priv->tx.ts_rateindex;
- if (!an || !priv_sta || !ieee80211_is_data(fc) ||
+ if (!priv_sta || !ieee80211_is_data(fc) ||
!tx_info_priv->update_rc)
goto exit;
if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT)
goto exit;
- if (tx_info_priv->tx.ts_rssi > 0) {
- ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi,
- tx_info_priv->tx.ts_rssi);
- }
-
/*
* If underrun error is seen assume it as an excessive retry only
* if prefetch trigger level have reached the max (0x3f for 5416)
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 0cd2a91..e0e345e 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -57,6 +57,28 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
ath9k_hw_rxena(ah);
}
+static void ath_setdefantenna(struct ath_softc *sc, u32 antenna)
+{
+ /* XXX block beacon interrupts */
+ ath9k_hw_setantenna(sc->sc_ah, antenna);
+ sc->sc_defant = antenna;
+ sc->sc_rxotherant = 0;
+}
+
+/*
+ * Extend 15-bit time stamp from rx descriptor to
+ * a full 64-bit TSF using the current h/w TSF.
+*/
+static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
+{
+ u64 tsf;
+
+ tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ if ((tsf & 0x7fff) < rstamp)
+ tsf -= 0x8000;
+ return (tsf & ~0x7fff) | rstamp;
+}
+
static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len)
{
struct sk_buff *skb;
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index dad81a9..3de60c5 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -147,6 +147,19 @@ static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno)
return 0;
}
+static void ath_get_beaconconfig(struct ath_softc *sc, int if_id,
+ struct ath_beacon_config *conf)
+{
+ struct ieee80211_hw *hw = sc->hw;
+
+ /* fill in beacon config data */
+
+ conf->beacon_interval = hw->conf.beacon_int;
+ conf->listen_interval = 100;
+ conf->dtim_count = 1;
+ conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval;
+}
+
/* Calculate Atheros packet type from IEEE80211 packet header */
static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
@@ -522,7 +535,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
struct ath_desc *ds = bf->bf_desc;
struct ath_desc *lastds = bf->bf_lastbf->bf_desc;
struct ath9k_11n_rate_series series[4];
- struct ath_node *an = NULL;
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
@@ -540,9 +552,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
tx_info = IEEE80211_SKB_CB(skb);
rates = tx_info->control.rates;
- if (tx_info->control.sta)
- an = (struct ath_node *)tx_info->control.sta->drv_priv;
-
if (ieee80211_has_morefrags(fc) ||
(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
rates[1].count = rates[2].count = rates[3].count = 0;
@@ -632,10 +641,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
(rates[i].flags & IEEE80211_TX_RC_SHORT_GI),
bf_isshpreamble(bf));
- if (bf_isht(bf) && an)
- series[i].ChSel = ath_chainmask_sel_logic(sc, an);
- else
- series[i].ChSel = sc->sc_tx_chainmask;
+ series[i].ChSel = sc->sc_tx_chainmask;
if (rtsctsena)
series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
--
1.6.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
