Like ATH12K_PCI_IRQ_CE0_OFFSET, define ATH12K_PCI_IRQ_DP_OFFSET for
DP to save the IRQ instead of base_vector from MSI config.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
---
v2: No change from v1.
---
drivers/net/wireless/ath/ath12k/pci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 7f984a80fb27..4b872eff087c 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -17,7 +17,8 @@
#define ATH12K_PCI_BAR_NUM 0
#define ATH12K_PCI_DMA_MASK 32
-#define ATH12K_PCI_IRQ_CE0_OFFSET 3
+#define ATH12K_PCI_IRQ_CE0_OFFSET 3
+#define ATH12K_PCI_IRQ_DP_OFFSET 14
#define WINDOW_ENABLE_BIT 0x40000000
#define WINDOW_REG_ADDRESS 0x310c
@@ -511,9 +512,8 @@ static irqreturn_t ath12k_pci_ext_interrupt_handler(int irq, void *arg)
static int ath12k_pci_ext_irq_config(struct ath12k_base *ab)
{
int i, j, ret, num_vectors = 0;
- u32 user_base_data = 0, base_vector = 0, base_idx;
+ u32 user_base_data = 0, base_vector = 0;
- base_idx = ATH12K_PCI_IRQ_CE0_OFFSET + CE_COUNT_MAX;
ret = ath12k_pci_get_user_msi_assignment(ab, "DP",
&num_vectors,
&user_base_data,
@@ -542,7 +542,7 @@ static int ath12k_pci_ext_irq_config(struct ath12k_base *ab)
}
irq_grp->num_irq = num_irq;
- irq_grp->irqs[0] = base_idx + i;
+ irq_grp->irqs[0] = ATH12K_PCI_IRQ_DP_OFFSET + i;
for (j = 0; j < irq_grp->num_irq; j++) {
int irq_idx = irq_grp->irqs[j];
--
2.34.1
