Dear Atheros Experts, I have an issue with an atheros card that was working fine under suse10.3 after installation of the madwifi drivers. When installing suse 11.0, a driver was automatically loaded, but it does not work. I have posted the details here: http://forums.opensuse.org/network- internet/wireless/400074-atheros-5005g-card-doesnt-find-signal.html#post1898247 Larry proposed me to mail the output of dmesg to you. I would appreciate if you could help me solving this issue. Thanks in advance Alexander ---------------------------------------------------- The critical section is as follows: ath5k_pci 0000:02:00.0: registered as 'phy0' phy0: Selected rate control algorithm 'pid' ath5k phy0: Atheros AR5213A chip found (MAC: 0x78, PHY: 0x45) ath5k phy0: RF2112A 2GHz radio found (0x56) ADDRCONF(NETDEV_UP): wlan0: link is not ready ath5k phy0: failed to wakeup the MAC Chip ath5k phy0: can't reset hardware (-5) pccard: card ejected from slot 0 It appears that the ath5k driver does not support the AR5213A. Please post these lines to linux-wireless@xxxxxxxxxxxxxxxx The Atheros experts hang out there. Larry  -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html