BIT(7) (PME_Status) is first checked and then set unnecessarily. Remove
the unnecessary setting for the bit that is already on and adjust the
comment related to it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 1633328bc3d1..6ae37d61a2a2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2312,9 +2312,7 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
pci_read_config_byte(rtlpci->pdev, cap_pointer + 5, &pmcs_reg);
if (pmcs_reg & BIT(7)) {
- /* PME event occured, clear the PM_Status by write 1 */
- pmcs_reg = pmcs_reg | BIT(7);
-
+ /* Clear PME_Status with write */
pci_write_config_byte(rtlpci->pdev, cap_pointer + 5,
pmcs_reg);
/* Read it back to check */
--
2.30.2
