Using the WSEC command instead of sae_password seems to be the supported mechanism on newer firmware, and also how the brcmdhd driver does it. According to user reports [1], the sae_password codepath doesn't actually work on machines with Cypress chips anyway, so no harm in removing it. This makes WPA3 work with iwd, or with wpa_supplicant pending a support patchset [2]. [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html Signed-off-by: Hector Martin <marcan@xxxxxxxxx> --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 46 +++++++++------------- .../broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +- 2 files changed, 20 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 2a90bb24ba77..138af70a33b8 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -1687,52 +1687,44 @@ static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e) return reason; } -static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) +static int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags) { struct brcmf_pub *drvr = ifp->drvr; struct brcmf_wsec_pmk_le pmk; int err; + if (key_len > sizeof(pmk.key)) { + bphy_err(drvr, "key must be less than %zu bytes\n", + sizeof(pmk.key)); + return -EINVAL; + } + memset(&pmk, 0, sizeof(pmk)); - /* pass pmk directly */ - pmk.key_len = cpu_to_le16(pmk_len); - pmk.flags = cpu_to_le16(0); - memcpy(pmk.key, pmk_data, pmk_len); + /* pass key material directly */ + pmk.key_len = cpu_to_le16(key_len); + pmk.flags = cpu_to_le16(flags); + memcpy(pmk.key, key, key_len); - /* store psk in firmware */ + /* store key material in firmware */ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK, &pmk, sizeof(pmk)); if (err < 0) bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n", - pmk_len); + key_len); return err; } +static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) +{ + return brcmf_set_wsec(ifp, pmk_data, pmk_len, 0); +} + static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data, u16 pwd_len) { - struct brcmf_pub *drvr = ifp->drvr; - struct brcmf_wsec_sae_pwd_le sae_pwd; - int err; - - if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) { - bphy_err(drvr, "sae_password must be less than %d\n", - BRCMF_WSEC_MAX_SAE_PASSWORD_LEN); - return -EINVAL; - } - - sae_pwd.key_len = cpu_to_le16(pwd_len); - memcpy(sae_pwd.key, pwd_data, pwd_len); - - err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd, - sizeof(sae_pwd)); - if (err < 0) - bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n", - pwd_len); - - return err; + return brcmf_set_wsec(ifp, pwd_data, pwd_len, BRCMF_WSEC_PASSPHRASE); } static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason, diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h index 611d1a6aabb9..b68c46caabe8 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h @@ -584,7 +584,7 @@ struct brcmf_wsec_key_le { struct brcmf_wsec_pmk_le { __le16 key_len; __le16 flags; - u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1]; + u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN]; }; /** --- base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa change-id: 20231107-brcmfmac-wpa3-9e5f66e8be34 Best regards, -- Hector Martin <marcan@xxxxxxxxx>
