This series patches will introduce a new designed DMA busy watchdog and fix two small issues when calling ieee80211_restart_hw(). Changes in v2: * Disable DMA watchdog for USB NICs because they don't have relevant register. * Extend 'watchdog' module parameter to support different watchdogs. * Clear the 'intf->enable_beacon' flag instead of hacking the conditions of the 'else if' block. The logic still the same but should be easy to understand what happened there. * Clear the beacon before restarting the beacon queue. It should be like this. * Unconditional stop the beacon queue in rt2x00lib_disable_radio(). It is no need to check the reset status because there is a flag in rt2x00 queue struct to record the queue start/stop status. It won't be stopped twice. The procedure still the same as patch v1. P.S. It seems that this cover letter won't be included in the patch series in https://lore.kernel.org/. It's an issue with the Outlook email or I missed something? Shiji Yang (3): wifi: rt2x00: introduce DMA busy check watchdog for rt2800 wifi: rt2x00: disable RTS threshold for rt2800 by default wifi: rt2x00: restart beacon queue when hardware reset drivers/net/wireless/ralink/rt2x00/rt2800.h | 4 + .../net/wireless/ralink/rt2x00/rt2800lib.c | 81 ++++++++++++++++--- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 3 + .../net/wireless/ralink/rt2x00/rt2x00dev.c | 3 + .../net/wireless/ralink/rt2x00/rt2x00mac.c | 11 +++ 5 files changed, 89 insertions(+), 13 deletions(-) -- 2.39.2
