From: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx> No matter CLC is enabled or disabled, the driver should initialize the default value 0xff for channel configuration of CLC. Otherwise, the zero value would disable channels. Reported-and-tested-by: Ben Greear <greearb@xxxxxxxxxxxxxxx> Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@xxxxxxxxxxxxxxx/ Fixes: 09382d8f8641 ("mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx> Signed-off-by: Deren Wu <deren.wu@xxxxxxxxxxxx> --- v2: * v1 is missing in wireless patchwork and lore.kernel.org. * update title and message to make issue description clear --- drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index 63f3d4a5c9aa..2cc2d2788f83 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -375,6 +375,7 @@ static int mt7921_load_clc(struct mt792x_dev *dev, const char *fw_name) int ret, i, len, offset = 0; u8 *clc_base = NULL, hw_encap = 0; + dev->phy.clc_chan_conf = 0xff; if (mt7921_disable_clc || mt76_is_usb(&dev->mt76)) return 0; -- 2.18.0
