When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw().
Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx>
---
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 3 +++
drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 4 +++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 9a9cfd0ce..ac58a56c3 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -101,6 +101,8 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00link_stop_tuner(rt2x00dev);
rt2x00queue_stop_queues(rt2x00dev);
rt2x00queue_flush_queues(rt2x00dev, true);
+ if (test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags))
+ rt2x00queue_stop_queue(rt2x00dev->bcn);
/*
* Disable radio.
@@ -1286,6 +1288,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
rt2x00dev->intf_ap_count = 0;
rt2x00dev->intf_sta_count = 0;
rt2x00dev->intf_associated = 0;
+ rt2x00dev->intf_beaconing = 0;
/* Enable the radio */
retval = rt2x00lib_enable_radio(rt2x00dev);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
index 4202c6517..6fcbf534a 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
@@ -615,7 +615,9 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
* and keep it running on other interfaces.
*/
rt2x00queue_clear_beacon(rt2x00dev, vif);
- } else if (bss_conf->enable_beacon && !intf->enable_beacon) {
+ } else if (bss_conf->enable_beacon &&
+ (!intf->enable_beacon ||
+ test_bit(DEVICE_STATE_RESET, &rt2x00dev->flags))) {
rt2x00dev->intf_beaconing++;
intf->enable_beacon = true;
/*
--
2.39.2
