The capabilities for the EHT mesh are generated from the capabilities
reported by the firmware. But the firmware only reports the overall
capabilities and not the one which are specific for mesh.
Capabilities which requires infrastructure setup with a main STA(AP)
controlling operations are not needed for mesh and hence remove these
capabilities from the list.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/mac.c | 45 +++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 59d8fff78e6d..aebbb762dcfb 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -4554,6 +4554,48 @@ static void ath12k_mac_copy_eht_ppe_thresh(struct ath12k_wmi_ppe_threshold_arg *
}
}
+static void
+ath12k_mac_filter_eht_cap_mesh(struct ieee80211_eht_cap_elem_fixed
+ *eht_cap_elem)
+{
+ u8 m;
+
+ m = IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS;
+ eht_cap_elem->mac_cap_info[0] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO;
+ eht_cap_elem->phy_cap_info[0] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK |
+ IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK |
+ IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK |
+ IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK;
+ eht_cap_elem->phy_cap_info[3] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO |
+ IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP |
+ IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP |
+ IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI;
+ eht_cap_elem->phy_cap_info[4] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK |
+ IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP |
+ IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP |
+ IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK;
+ eht_cap_elem->phy_cap_info[5] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK;
+ eht_cap_elem->phy_cap_info[6] &= ~m;
+
+ m = IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ |
+ IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ |
+ IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ |
+ IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ |
+ IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ |
+ IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ;
+ eht_cap_elem->phy_cap_info[7] &= ~m;
+}
+
static void ath12k_mac_copy_eht_cap(struct ath12k *ar,
struct ath12k_band_cap *band_cap,
struct ieee80211_he_cap_elem *he_cap_elem,
@@ -4592,6 +4634,9 @@ static void ath12k_mac_copy_eht_cap(struct ath12k *ar,
IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ |
IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ);
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ ath12k_mac_filter_eht_cap_mesh(eht_cap_elem);
+ break;
default:
break;
}
--
2.17.1
