There is currently a problem with the TX timer getting armed multiple
unnecessary times causing big performance regression on some device that
suffer from heavy handling of hrtimer rearm.
The use of the TX timer is an old implementation that predates the napi
implementation and the interrupt enable/disable handling.
Due to stmmac being a very old code, the TX timer was never evaluated
again with this new implementation and was kept there causing
performance regression. The performance regression started to appear
with kernel version 4.19 with 8fce33317023 ("net: stmmac: Rework coalesce
timer and fix multi-queue races") where the timer was reduced to 1ms
causing it to be armed 40 times more than before.
Decreasing the timer made the problem more present and caused the
regression in the other of 600-700mbps on some device (regression where
this was notice is ipq806x).
The problem is in the fact that handling the hrtimer on some target is
expensive and recent kernel made the timer armed much more times.
A solution that was proposed was reverting the hrtimer change and use
mod_timer but such solution would still hide the real problem in the
current implementation.
To fix the regression, apply some additional logic and skip arming the
timer when not needed.
Arm the timer ONLY if a napi is not already scheduled. Running the timer
is redundant since the same function (stmmac_tx_clean) will run in the
napi TX poll. Also try to cancel any timer if a napi is scheduled to
prevent redundant run of TX call.
With the following new logic the original performance are restored while
keeping using the hrtimer.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index bb1dbf4c9f6c..5124ee87286c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2996,13 +2996,25 @@ static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
{
struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
u32 tx_coal_timer = priv->tx_coal_timer[queue];
+ struct stmmac_channel *ch;
+ struct napi_struct *napi;
if (!tx_coal_timer)
return;
- hrtimer_start(&tx_q->txtimer,
- STMMAC_COAL_TIMER(tx_coal_timer),
- HRTIMER_MODE_REL);
+ ch = &priv->channel[tx_q->queue_index];
+ napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
+
+ /* Arm timer only if napi is not already scheduled.
+ * Try to cancel any timer if napi is scheduled, timer will be armed
+ * again in the next scheduled napi.
+ */
+ if (unlikely(!napi_is_scheduled(napi)))
+ hrtimer_start(&tx_q->txtimer,
+ STMMAC_COAL_TIMER(tx_coal_timer),
+ HRTIMER_MODE_REL);
+ else
+ hrtimer_try_to_cancel(&tx_q->txtimer);
}
/**
--
2.40.1
