Search Linux Wireless

Re: [net-next PATCH 2/3] net: stmmac: improve TX timer arm logic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 29, 2023 at 12:38:48PM +0000, Vincent Whitchurch wrote:
> On Fri, 2023-09-22 at 13:12 +0200, Christian Marangi wrote:
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 9201ed778ebc..14bf6fae6662 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -2994,13 +2994,25 @@ static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
> >  {
> >  	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
> >  	u32 tx_coal_timer = priv->tx_coal_timer[queue];
> > +	struct stmmac_channel *ch;
> > +	struct napi_struct *napi;
> >  
> > 
> >  	if (!tx_coal_timer)
> >  		return;
> >  
> > 
> > -	hrtimer_start(&tx_q->txtimer,
> > -		      STMMAC_COAL_TIMER(tx_coal_timer),
> > -		      HRTIMER_MODE_REL);
> > +	ch = &priv->channel[tx_q->queue_index];
> > +	napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
> > +
> > +	/* Arm timer only if napi is not already scheduled.
> > +	 * Try to cancel any timer if napi is scheduled, timer will be armed
> > +	 * again in the next scheduled napi.
> > +	 */
> > +	if (unlikely(!napi_is_scheduled(napi)))
> > +		hrtimer_start(&tx_q->txtimer,
> > +			      STMMAC_COAL_TIMER(tx_coal_timer),
> > +			      HRTIMER_MODE_REL);
> > +	else
> > +		hrtimer_try_to_cancel(&tx_q->txtimer);
> 
> When this function is called from within the napi poll function
> (stmmac_tx_clean()), NAPI_STATE_SCHED will always be set and so after
> this patch the "We still have pending packets, let's call for a new
> scheduling" logic will never start the timer.  Was that really
> intentional?
>

No and understanding the code flow of napi and tx-coal is hard... (also
problem with tx coal arise only with real world scenario and now with
synthetic tests like iperf.

I will shortly send a v2 of this that will just move the logic of arming
the TX timer outside napi call after DMA interrupt is enabled again.
Currently testing the new version on openwrt with ipq806x hoping
everything is good.

(same perf increase observed but no queue timeout)

-- 
	Ansuel



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux