Currently, during channel switch, deflink (or link_id 0) is always
considered. However, with Multi-Link Operation (MLO), there is a
need to handle link specific data structures based on the actual
operational link_id during channel switch operation.
Hence, add support for the same. Non-MLO based operations will use
link_id as 0 or deflink member as applicable.
While at it, beacon count down now needs to be updated on proper
link_id's beacon, do that as well.
Aditya Kumar Singh (2):
wifi: cfg80211/mac80211: add support for AP channel switch with MLO
wifi: mac80211: update beacon counters per link basis
---
v2: * reabsed on ToT
* removed unwanted locking sequence during cancelling CSA work handler
since now locking is moved to wiphy level, that part is uncessary now.
---
drivers/net/wireless/ath/ath10k/mac.c | 4 +-
drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
drivers/net/wireless/ath/ath12k/wmi.c | 2 +-
drivers/net/wireless/ath/ath9k/beacon.c | 2 +-
.../net/wireless/ath/ath9k/htc_drv_beacon.c | 2 +-
.../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 6 +-
.../wireless/intel/iwlwifi/mvm/time-event.c | 2 +-
.../net/wireless/marvell/mwifiex/cfg80211.c | 3 +-
drivers/net/wireless/mediatek/mt76/mac80211.c | 2 +-
.../net/wireless/mediatek/mt76/mt7615/mcu.c | 2 +-
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 2 +-
.../net/wireless/mediatek/mt76/mt7996/mcu.c | 2 +-
drivers/net/wireless/ti/wlcore/event.c | 2 +-
drivers/net/wireless/virtual/mac80211_hwsim.c | 2 +-
include/net/cfg80211.h | 3 +-
include/net/mac80211.h | 7 +-
net/mac80211/cfg.c | 113 +++++++++++-------
net/mac80211/ibss.c | 2 +-
net/mac80211/ieee80211_i.h | 3 +-
net/mac80211/mesh.c | 2 +-
net/mac80211/tx.c | 14 ++-
net/wireless/nl80211.c | 2 +-
net/wireless/rdev-ops.h | 7 +-
net/wireless/trace.h | 12 +-
26 files changed, 124 insertions(+), 80 deletions(-)
base-commit: 5ee7b2ea07cc6972bc505103f5d483943754a601
--
2.17.1
