On 19.09.23 06:48, Shiji Yang wrote:
Referring to the MT761{0,2} EEPROM content, setting the corresponding
EEPROM control bit means enabling external LNA. In this case, we
should use the EEMROM LNA gain instead of 0.
Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c b/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c
index 0acabba2d..a0b95509a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c
@@ -135,9 +135,9 @@ u8 mt76x02_get_lna_gain(struct mt76x02_dev *dev,
u8 lna;
val = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_1);
- if (val & MT_EE_NIC_CONF_1_LNA_EXT_2G)
+ if (!(val & MT_EE_NIC_CONF_1_LNA_EXT_2G))
*lna_2g = 0;
- if (val & MT_EE_NIC_CONF_1_LNA_EXT_5G)
+ if (!(val & MT_EE_NIC_CONF_1_LNA_EXT_5G))
memset(lna_5g, 0, sizeof(s8) * 3);
if (chan->band == NL80211_BAND_2GHZ)
I took a closer look at the interpretation of these flags and how they
are handled in the vendor driver. From what I can tell, on MT76x2 LNA
gain should only be used as part of the RSSI calculation for internal
LNA devices. In the MT76x0 code, I see no such checks, so the LNA gain
should be used unconditionally.
What do you think about this patch?
Thanks,
- Felix
---
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.c
@@ -131,15 +131,8 @@ u8 mt76x02_get_lna_gain(struct mt76x02_dev *dev,
s8 *lna_2g, s8 *lna_5g,
struct ieee80211_channel *chan)
{
- u16 val;
u8 lna;
- val = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_1);
- if (val & MT_EE_NIC_CONF_1_LNA_EXT_2G)
- *lna_2g = 0;
- if (val & MT_EE_NIC_CONF_1_LNA_EXT_5G)
- memset(lna_5g, 0, sizeof(s8) * 3);
-
if (chan->band == NL80211_BAND_2GHZ)
lna = *lna_2g;
else if (chan->hw_value <= 64)
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c
@@ -256,7 +256,8 @@ void mt76x2_read_rx_gain(struct mt76x02_dev *dev)
struct ieee80211_channel *chan = dev->mphy.chandef.chan;
int channel = chan->hw_value;
s8 lna_5g[3], lna_2g;
- u8 lna;
+ bool use_lna;
+ u8 lna = 0;
u16 val;
if (chan->band == NL80211_BAND_2GHZ)
@@ -275,7 +276,14 @@ void mt76x2_read_rx_gain(struct mt76x02_dev *dev)
dev->cal.rx.mcu_gain |= (lna_5g[1] & 0xff) << 16;
dev->cal.rx.mcu_gain |= (lna_5g[2] & 0xff) << 24;
- lna = mt76x02_get_lna_gain(dev, &lna_2g, lna_5g, chan);
+ if (chan->band == NL80211_BAND_2GHZ)
+ use_lna = !(val & MT_EE_NIC_CONF_1_LNA_EXT_2G);
+ else
+ use_lna = !(val & MT_EE_NIC_CONF_1_LNA_EXT_5G);
+
+ if (use_lna)
+ lna = mt76x02_get_lna_gain(dev, &lna_2g, lna_5g, chan);
+
dev->cal.rx.lna_gain = mt76x02_sign_extend(lna, 8);
}
EXPORT_SYMBOL_GPL(mt76x2_read_rx_gain);
