When 6 GHz AP or STA is assigned a channel ctx, it needs to
extract the power type from HE operation element.
If unset power type is present, by default IEEE80211_REG_LPI_AP
power mode will be used.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aishwarya R <quic_aisr@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/mac.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 5b9af264d305..01f81b087fa2 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -5823,6 +5823,7 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
struct ath12k_vif *arvif = (void *)vif->drv_priv;
int ret;
struct ath12k_wmi_peer_create_arg param;
+ enum ieee80211_ap_reg_power power_type;
mutex_lock(&ar->conf_mutex);
@@ -5830,6 +5831,16 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
"mac chanctx assign ptr %pK vdev_id %i\n",
ctx, arvif->vdev_id);
+ if (ar->supports_6ghz && ctx->def.chan->band == NL80211_BAND_6GHZ &&
+ (arvif->vdev_type == WMI_VDEV_TYPE_STA ||
+ arvif->vdev_type == WMI_VDEV_TYPE_AP)) {
+ power_type = vif->bss_conf.power_type;
+ ath12k_dbg(ab, ATH12K_DBG_MAC, "mac chanctx power type %d\n",
+ power_type);
+ if (power_type == IEEE80211_REG_UNSET_AP)
+ power_type = IEEE80211_REG_LPI_AP;
+ }
+
/* for some targets bss peer must be created before vdev_start */
if (ab->hw_params->vdev_start_delay &&
arvif->vdev_type != WMI_VDEV_TYPE_AP &&
--
2.17.1
