lgtm
Reviewed-by: Matthew Wang <matthewmwang@xxxxxxxxxxxx>
On Fri, Sep 15, 2023 at 1:38 AM Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
>
> On Thu, Sep 14, 2023 at 03:09:47PM +0800, Pin-yen Lin wrote:
> > On Thu, Sep 14, 2023 at 4:31 AM Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
> > > I'd appreciate another review/test from one of the others here
> > > (Matthew?), even though I know y'all are already working together.
>
> I'd still appreciate some comment here.
>
> > > > - if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
> > > > - sizeof(bridge_tunnel_header))) ||
> > > > - (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
> > > > - sizeof(rfc1042_header)) &&
> > > > - ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_AARP &&
> > > > - ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_IPX)) {
> > > > + if (sizeof(*rx_pkt_hdr) + rx_pkt_off <= skb->len &&
> > >
> > > Are you sure you want this length check to fall back to the non-802.3
> > > codepath? Isn't it an error to look like an 802.3 frame but to be too
> > > small? I'd think we want to drop such packets, not process them as-is.
> >
> > I did that because I saw other drivers (e.g., [1], [2]) use similar
> > approaches, and I assumed that the rest of the pipeline will
> > eventually drop it if the packet cannot be recognized. But, yes, we
> > can just drop the packet here if it doesn't look good.
> >
> > [1]: https://elixir.bootlin.com/linux/latest/source/drivers/net/wireless/intersil/hostap/hostap_80211_rx.c#L1035
> > [2]: https://elixir.bootlin.com/linux/latest/source/drivers/net/wireless/intel/ipw2x00/libipw_rx.c#L735
>
> Hmm, I suppose. I'm frankly not sure how exactly all upper layers handle
> this, but at least in a non-raw mode, we'll drop them. (We might be
> delivering awfully weird packets to tcpdump though, but this is already
> a weird situation, if it's such a weird-looking packet.)
>
> > > If I'm correct, then this check should move inside the 'if' branch of
> > > this if/else.
> >
> > We can't simply move the check inside the if branch because the
> > condition also checks rx_pkt_hdr->rfc1042_hdr.snap_type. Though, of
> > course, it is doable by adding another `if` conditions.
>
> Right.
>
> I guess this is probably OK as-is:
>
> Acked-by: Brian Norris <briannorris@xxxxxxxxxxxx>
