For the NL80211_REGDOM_SET_BY_USER hint from cfg80211, it set the new
alpha2 code to ath12k, then ath12k send WMI_SET_INIT_COUNTRY_CMDID to
firmware for all chips currently. When test with WCN7850 chips,
this WMI CMD leads firmware crash.
For AP based chips(QCN92xx), WMI_SET_INIT_COUNTRY_CMDID is the correct
command use. However, for STATION based chips(WCN7850), it need to use
another WMI CMD, WMI_SET_CURRENT_COUNTRY_CMDID.
Add flag current_cc_support in hardware parameters. It is used to
distinguish AP/STA platform. After that, the firmware will work
normal and the regulatory feature works well for WCN7850.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/hw.c | 3 +++
drivers/net/wireless/ath/ath12k/hw.h | 1 +
drivers/net/wireless/ath/ath12k/reg.c | 29 ++++++++++++++++++---------
3 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 5991cc91cd00..c9ed4c0e0da5 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -907,6 +907,7 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.hal_ops = &hal_qcn9274_ops,
.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+ .current_cc_support = false,
},
{
.name = "wcn7850 hw2.0",
@@ -964,6 +965,7 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01) |
BIT(CNSS_PCIE_PERST_NO_PULL_V01),
+ .current_cc_support = true,
},
{
.name = "qcn9274 hw2.0",
@@ -1019,6 +1021,7 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.hal_ops = &hal_qcn9274_ops,
.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+ .current_cc_support = false,
},
};
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index e6c4223c283c..292c07bb1a8b 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -173,6 +173,7 @@ struct ath12k_hw_params {
bool tcl_ring_retry:1;
bool reoq_lut_support:1;
bool supports_shadow_regs:1;
+ bool current_cc_support:1;
u32 hal_desc_sz;
u32 num_tcl_banks;
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index c2f2fcce9fb1..97c93a4901e6 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -48,6 +48,7 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
{
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct ath12k_wmi_init_country_arg arg;
+ struct wmi_set_current_country_params set_current_param = {};
struct ath12k *ar = hw->priv;
int ret;
@@ -76,18 +77,26 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
return;
}
- /* Set the country code to the firmware and wait for
- * the WMI_REG_CHAN_LIST_CC EVENT for updating the
- * reg info
+ /* Set the country code to the firmware. ath12k will subsequently receive
+ * the WMI_REG_CHAN_LIST_CC EVENT for updating the regulatory info.
*/
- arg.flags = ALPHA_IS_SET;
- memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
- arg.cc_info.alpha2[2] = 0;
+ if (ar->ab->hw_params->current_cc_support) {
+ memcpy(&set_current_param.alpha2, request->alpha2, 2);
- ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
- if (ret)
- ath12k_warn(ar->ab,
- "INIT Country code set to fw failed : %d\n", ret);
+ ret = ath12k_wmi_send_set_current_country_cmd(ar, &set_current_param);
+ if (ret)
+ ath12k_warn(ar->ab,
+ "failed set current country code: %d\n", ret);
+ } else {
+ arg.flags = ALPHA_IS_SET;
+ memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
+ arg.cc_info.alpha2[2] = 0;
+
+ ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
+ if (ret)
+ ath12k_warn(ar->ab,
+ "INIT Country code set to fw failed : %d\n", ret);
+ }
ath12k_mac_11d_scan_stop(ar);
ar->regdom_set_by_user = true;
--
2.40.1
