On Tue, Aug 29, 2023 at 04:25:45PM +0000, Greenman, Gregory wrote:
> Hi,
>
> On Mon, 2023-08-21 at 21:07 -0700, Sultan Alsawaf wrote:
> > From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
> >
> > The conversion from bss_info_changed() to vif_cfg/link_info_changed()
> > removed a call to iwl_mvm_bss_info_changed_station_common() from what
> > became the vif_cfg_changed() path. As a result, BSS_CHANGED_PS and other
> > power save changes sent via ieee80211_vif_cfg_change_notify() are ignored
> > for MLD, which breaks power save entirely. This has a noticeable impact on
> > power consumption, causing idle package power to hover at 10 W on my
> > i9-13980HX laptop with an AX210 while connected to WiFi.
> >
> > Add the missing iwl_mvm_bss_info_changed_station_common() call to the
> > vif_cfg_changed() path to fix power save for MLD. This brings idle package
> > power down to 1 W on my laptop, a 9 W improvement.
> >
> > Fixes: 22c588343529 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
> > Signed-off-by: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
> > ---
> > drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
> > index 8b6c641772ee..6abc05976870 100644
> > --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
> > +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
> > @@ -731,6 +731,8 @@ static void iwl_mvm_mld_vif_cfg_changed_station(struct iwl_mvm *mvm,
> >
> > mvmvif->associated = vif->cfg.assoc;
> >
> > + iwl_mvm_bss_info_changed_station_common(mvm, vif, &vif->bss_conf,
> > + changes);
> > if (!(changes & BSS_CHANGED_ASSOC))
> > return;
> >
>
> I agree that it looks like the call to iwl_mvm_bss_info_changed_station_common() is missing here, but
> I think if is is added here then the call to iwl_mvm_power_update_mac() at the end of this function
> is not needed anymore?
That call to iwl_mvm_power_update_mac() only exists in the backport driver [1]
at the moment, hence why power save is currently broken in the upstream driver.
I wasn't aware that the backport driver had that change until after I sent this,
FWIW. :)
I agree that the iwl_mvm_power_update_mac() call in the backport driver would be
redundant with this patch.
How would you like to go about this? Shall I send a v2 reformatted for the
backport driver, with an updated commit message since power save isn't broken in
the backport driver?
Or could this be staged upstream with [1] subsequently getting dropped from the
backport driver?
Thanks,
Sultan
[1] https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/backport-iwlwifi.git/commit/?id=c3201e3d7d88bdfa0f0a94e4141c626c35724655
