On 8/2/2023 1:58 AM, Manish Dharanenthiran wrote:
Radar detection fails in the secondary 80 MHz when the the AP's primary 80 MHz is in non-DFS region in 160 MHz. This is due to WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 is not set properly in case of the primary 80 MHz is in non-DFS region. HALPHY detects the radar pulses in the secondary 80 MHz only when WMI_CHAN_INFO_DFS_FREQ2 is set. Fix this issue by setting WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 based on the radar_enabled flag from the channel context. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <quic_mdharane@xxxxxxxxxxx>
Reviewed-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
