Ping-Ke Shih <pkshih@xxxxxxxxxxx> wrote: > The coming WiFi 7 chip is 8922AE which uses different hardware rate and > register naming rule. Adding a chip_info::chip_gen field can help to > do things by generations accordingly. > > Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> 10 patches applied to wireless-next.git, thanks. f698afa7ce37 wifi: rtw89: add chip_info::chip_gen to determine chip generation 9e5c6c0df94e wifi: rtw89: define hardware rate v1 for WiFi 7 chips 2ef14155c29b wifi: rtw89: phy: rate pattern handles HW rate by chip gen 401b0c161b09 wifi: rtw89: use struct to set RA H2C command c97683ff01a4 wifi: rtw89: add H2C RA command V1 to support WiFi 7 chips c342ac219516 wifi: rtw89: use struct to access firmware C2H event header 57cafeb18f06 wifi: rtw89: use struct to access RA report 5c152231c341 wifi: rtw89: add C2H RA event V1 to support WiFi 7 chips ae775faa8750 wifi: rtw89: add to display hardware rates v1 histogram in debugfs 023d2f14abf8 wifi: rtw89: get data rate mode/NSS/MCS v1 from RX descriptor -- https://patchwork.kernel.org/project/linux-wireless/patch/20230728070252.66525-2-pkshih@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
