Add more unified command IDs which will be used in new chipset.
This is the preliminary patch for mt7925 support.
Co-developed-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Signed-off-by: Deren Wu <deren.wu@xxxxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index ed70bde1428b..6ab86b1925f5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -796,6 +796,7 @@ enum {
STA_REC_PHY = 0x15,
STA_REC_HE_6G = 0x17,
STA_REC_HE_V2 = 0x19,
+ STA_REC_MLD = 0x20,
STA_REC_EHT = 0x22,
STA_REC_HDRT = 0x28,
STA_REC_HDR_TRANS = 0x2B,
@@ -1212,12 +1213,17 @@ enum {
MCU_UNI_CMD_RX_HDR_TRANS = 0x12,
MCU_UNI_CMD_SER = 0x13,
MCU_UNI_CMD_TWT = 0x14,
+ MCU_UNI_CMD_SET_DOMAIN_INFO = 0x15,
+ MCU_UNI_CMD_SCAN_REQ = 0x16,
MCU_UNI_CMD_RDD_CTRL = 0x19,
MCU_UNI_CMD_GET_MIB_INFO = 0x22,
+ MCU_UNI_CMD_GET_STAT_INFO = 0x23,
MCU_UNI_CMD_SNIFFER = 0x24,
MCU_UNI_CMD_SR = 0x25,
MCU_UNI_CMD_ROC = 0x27,
+ MCU_UNI_CMD_SET_DBDC_PARMS = 0x28,
MCU_UNI_CMD_TXPOWER = 0x2b,
+ MCU_UNI_CMD_SET_POWER_LIMIT = 0x2c,
MCU_UNI_CMD_EFUSE_CTRL = 0x2d,
MCU_UNI_CMD_RA = 0x2f,
MCU_UNI_CMD_MURU = 0x31,
@@ -1296,6 +1302,7 @@ enum {
UNI_BSS_INFO_IFS_TIME = 23,
UNI_BSS_INFO_OFFLOAD = 25,
UNI_BSS_INFO_MLD = 26,
+ UNI_BSS_INFO_PM_DISABLE = 27,
};
enum {
--
2.18.0
