Hi,
I am trying to help a user of rtw8723ds. The original problem was that the
vendor driver was causing a spontaneous reboot. As I have no interest in
"fixing" that driver, I steered him to my rtw88 repo.
The driver loads, and then nothing happens. With the debug mask in rtw_core set
to all ones, his log shows the following:
[ 150.131387] rtw_core: loading out-of-tree module taints kernel.
[ 165.352077] rtw_8723ds mmc1:0001:1: rtw88 SDIO probe: vendor=0x024c
device=d723 class=ff
[ 165.359853] rtw_8723ds mmc1:0001:1: Firmware version 48.0.0, H2C version 0
[ 165.818336] rtw_8723ds mmc1:0001:1: hw cap: hci=0x06, bw=0x03, ptcl=0x02,
ant_num=2, nss=1
[ 165.818350] rtw_8723ds mmc1:0001:1: use rfe_def[0]
[ 165.820320] rtw_8723ds mmc1:0001:1: use rfe_def[0]
[ 165.820333] rtw_8723ds mmc1:0001:1: phy cond=0x0304f400
[ 165.820412] rtw_8723ds mmc1:0001:1: txpwr regd 3 does not be configured
[ 165.820423] rtw_8723ds mmc1:0001:1: cfg txpwr regd 3 by regd 0 as alternative
[ 165.820438] rtw_8723ds mmc1:0001:1: txpwr regd 4 does not be configured
[ 165.820448] rtw_8723ds mmc1:0001:1: cfg txpwr regd 4 by regd 2 as alternative
[ 165.820462] rtw_8723ds mmc1:0001:1: txpwr regd 5 does not be configured
[ 165.820472] rtw_8723ds mmc1:0001:1: cfg txpwr regd 5 by regd 2 as alternative
[ 165.820485] rtw_8723ds mmc1:0001:1: txpwr regd 6 does not be configured
[ 165.820495] rtw_8723ds mmc1:0001:1: cfg txpwr regd 6 by regd 0 as alternative
[ 165.820508] rtw_8723ds mmc1:0001:1: txpwr regd 7 does not be configured
[ 165.820517] rtw_8723ds mmc1:0001:1: cfg txpwr regd 7 by regd 2 as alternative
[ 165.820531] rtw_8723ds mmc1:0001:1: txpwr regd 8 does not be configured
[ 165.820540] rtw_8723ds mmc1:0001:1: cfg txpwr regd 8 by regd 0 as alternative
[ 165.820554] rtw_8723ds mmc1:0001:1: txpwr regd 9 does not be configured
[ 165.820563] rtw_8723ds mmc1:0001:1: cfg txpwr regd 9 by regd 2 as alternative
[ 165.820755] rtw_8723ds mmc1:0001:1: regd init state 0: apply alpha2 00, regd
{10, 10}, dfs_region 0
[ 165.820952] rtw_8723ds mmc1:0001:1: regd state: 0 -> 0
[ 165.820969] rtw_8723ds mmc1:0001:1: get alpha2 00 from initiator 0: apply
alpha2 00, regd {10, 10}, dfs_region 0
There is no more output. I see nothing wrong here, but I have no SDIO
experience. Am I missing something?
Thanks,
Larry
