Add required peer association definitions and processing if the
bandwidth is 320 MHz.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad@xxxxxxxxxxx>
Signed-off-by: Pradeep Kumar Chitrapu<quic_pradeepc@xxxxxxxxxxx>
---
v5: No change from v4.
v4: No change from v3.
v3: No change from v2.
v2: No change from v1.
drivers/net/wireless/ath/ath12k/wmi.c | 2 ++
drivers/net/wireless/ath/ath12k/wmi.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index db1ff376319e..b0722050206d 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1816,6 +1816,8 @@ static void ath12k_wmi_copy_peer_flags(struct wmi_peer_assoc_complete_cmd *cmd,
cmd->peer_flags |= cpu_to_le32(WMI_PEER_80MHZ);
if (arg->bw_160)
cmd->peer_flags |= cpu_to_le32(WMI_PEER_160MHZ);
+ if (arg->bw_320)
+ cmd->peer_flags |= cpu_to_le32(WMI_PEER_EXT_320MHZ);
/* Typically if STBC is enabled for VHT it should be enabled
* for HT as well
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 780d589268b0..764ca4947281 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -1169,6 +1169,7 @@ enum wmi_tlv_peer_flags {
enum wmi_tlv_peer_flags_ext {
WMI_PEER_EXT_EHT = BIT(0),
+ WMI_PEER_EXT_320MHZ = BIT(1),
};
/** Enum list of TLV Tags for each parameter structure type. */
@@ -3553,6 +3554,7 @@ struct ath12k_wmi_peer_assoc_arg {
bool bw_40;
bool bw_80;
bool bw_160;
+ bool bw_320;
bool stbc_flag;
bool ldpc_flag;
bool static_mimops_flag;
--
2.39.0
