On 10/07/2023 12:47, Harry Austen wrote:
In iwl_mvm_thermal_zone_register(), when registering a thermal zone, the
thermal subsystem will evaluate its temperature.
But iwl_mvm_tzone_get_temp() fails at this time because
iwl_mvm_firmware_running() returns false.
And that's why many users report that they see
"thermal thermal_zoneX: failed to read out thermal zone (-61)"
message during wifi driver probing.
This patch attempts to fix this by delaying enabling of the thermal zone
until after the firmware has been loaded/initialized. It also gets
disabled when going into suspend.
Thanks for taking care of this bug.
The thermal zone will be accessible from userspace and can be enabled
manually. The resulting temperature read error will be the same in this
case.
IMO, it is cleaner to actually [un]register the thermal zone when the
firmware is [un]loaded
Signed-off-by: Harry Austen <hpausten@xxxxxxxxxxxxxx>
---
.../net/wireless/intel/iwlwifi/mvm/mac80211.c | 18 ++++++++++++++++++
drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 9 +--------
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index ce7905faa08f..a47d29a64dd4 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1187,6 +1187,17 @@ int iwl_mvm_mac_start(struct ieee80211_hw *hw)
mutex_unlock(&mvm->mutex);
+#ifdef CONFIG_THERMAL
+ /* Needs to be done outside of mutex guarded section to prevent deadlock, since enabling
+ * the thermal zone calls the .get_temp() callback, which attempts to acquire the mutex.
+ */
+ if (!ret) {
+ ret = thermal_zone_device_enable(mvm->tz_device.tzone);
+ if (ret)
+ IWL_DEBUG_TEMP(mvm, "Failed to enable thermal zone (err = %d)\n", ret);
+ }
+#endif
+
iwl_mvm_mei_set_sw_rfkill_state(mvm);
return ret;
@@ -1282,6 +1293,7 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
+ int ret;
flush_work(&mvm->async_handlers_wk);
flush_work(&mvm->add_stream_wk);
@@ -1307,6 +1319,12 @@ void iwl_mvm_mac_stop(struct ieee80211_hw *hw)
iwl_mvm_mei_set_sw_rfkill_state(mvm);
+#ifdef CONFIG_THERMAL
+ ret = thermal_zone_device_disable(mvm->tz_device.tzone);
+ if (ret)
+ IWL_DEBUG_TEMP(mvm, "Failed to disable thermal zone (err = %d)\n", ret);
+#endif
+
mutex_lock(&mvm->mutex);
__iwl_mvm_mac_stop(mvm);
mutex_unlock(&mvm->mutex);
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
index 157e96fa23c1..964d2d011c6b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
@@ -680,7 +680,7 @@ static struct thermal_zone_device_ops tzone_ops = {
static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm)
{
- int i, ret;
+ int i;
char name[16];
static atomic_t counter = ATOMIC_INIT(0);
@@ -707,13 +707,6 @@ static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm)
return;
}
- ret = thermal_zone_device_enable(mvm->tz_device.tzone);
- if (ret) {
- IWL_DEBUG_TEMP(mvm, "Failed to enable thermal zone\n");
- thermal_zone_device_unregister(mvm->tz_device.tzone);
- return;
- }
-
/* 0 is a valid temperature,
* so initialize the array with S16_MIN which invalid temperature
*/
--
2.41.0
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
