From: Ping-Ke Shih <pkshih@xxxxxxxxxxx> [ Upstream commit 99ff8da56322cda9eb9b37021e27b127c2d1cad8 ] Add PCI entry to 8851BE with its device ID 10ec:b851, also fill PCI info according to its capabilities. Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxx> Link: https://lore.kernel.org/r/20230421024551.29994-3-pkshih@xxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- .../net/wireless/realtek/rtw89/rtw8851be.c | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtw89/rtw8851be.c diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851be.c b/drivers/net/wireless/realtek/rtw89/rtw8851be.c new file mode 100644 index 0000000000000..0f7711c50bd15 --- /dev/null +++ b/drivers/net/wireless/realtek/rtw89/rtw8851be.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright(c) 2022-2023 Realtek Corporation + */ + +#include <linux/module.h> +#include <linux/pci.h> + +#include "pci.h" +#include "reg.h" +#include "rtw8851b.h" + +static const struct rtw89_pci_info rtw8851b_pci_info = { + .txbd_trunc_mode = MAC_AX_BD_TRUNC, + .rxbd_trunc_mode = MAC_AX_BD_TRUNC, + .rxbd_mode = MAC_AX_RXBD_PKT, + .tag_mode = MAC_AX_TAG_MULTI, + .tx_burst = MAC_AX_TX_BURST_2048B, + .rx_burst = MAC_AX_RX_BURST_128B, + .wd_dma_idle_intvl = MAC_AX_WD_DMA_INTVL_256NS, + .wd_dma_act_intvl = MAC_AX_WD_DMA_INTVL_256NS, + .multi_tag_num = MAC_AX_TAG_NUM_8, + .lbc_en = MAC_AX_PCIE_ENABLE, + .lbc_tmr = MAC_AX_LBC_TMR_2MS, + .autok_en = MAC_AX_PCIE_DISABLE, + .io_rcy_en = MAC_AX_PCIE_DISABLE, + .io_rcy_tmr = MAC_AX_IO_RCY_ANA_TMR_6MS, + + .init_cfg_reg = R_AX_PCIE_INIT_CFG1, + .txhci_en_bit = B_AX_TXHCI_EN, + .rxhci_en_bit = B_AX_RXHCI_EN, + .rxbd_mode_bit = B_AX_RXBD_MODE, + .exp_ctrl_reg = R_AX_PCIE_EXP_CTRL, + .max_tag_num_mask = B_AX_MAX_TAG_NUM, + .rxbd_rwptr_clr_reg = R_AX_RXBD_RWPTR_CLR, + .txbd_rwptr_clr2_reg = 0, + .dma_stop1 = {R_AX_PCIE_DMA_STOP1, B_AX_TX_STOP1_MASK_V1}, + .dma_stop2 = {0}, + .dma_busy1 = {R_AX_PCIE_DMA_BUSY1, DMA_BUSY1_CHECK_V1}, + .dma_busy2_reg = 0, + .dma_busy3_reg = R_AX_PCIE_DMA_BUSY1, + + .rpwm_addr = R_AX_PCIE_HRPWM, + .cpwm_addr = R_AX_CPWM, + .tx_dma_ch_mask = BIT(RTW89_TXCH_ACH4) | BIT(RTW89_TXCH_ACH5) | + BIT(RTW89_TXCH_ACH6) | BIT(RTW89_TXCH_ACH7) | + BIT(RTW89_TXCH_CH10) | BIT(RTW89_TXCH_CH11), + .bd_idx_addr_low_power = NULL, + .dma_addr_set = &rtw89_pci_ch_dma_addr_set, + .bd_ram_table = &rtw89_bd_ram_table_single, + + .ltr_set = rtw89_pci_ltr_set, + .fill_txaddr_info = rtw89_pci_fill_txaddr_info, + .config_intr_mask = rtw89_pci_config_intr_mask, + .enable_intr = rtw89_pci_enable_intr, + .disable_intr = rtw89_pci_disable_intr, + .recognize_intrs = rtw89_pci_recognize_intrs, +}; + +static const struct rtw89_driver_info rtw89_8851be_info = { + .chip = &rtw8851b_chip_info, + .bus = { + .pci = &rtw8851b_pci_info, + }, +}; + +static const struct pci_device_id rtw89_8851be_id_table[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xb851), + .driver_data = (kernel_ulong_t)&rtw89_8851be_info, + }, + {}, +}; +MODULE_DEVICE_TABLE(pci, rtw89_8851be_id_table); + +static struct pci_driver rtw89_8851be_driver = { + .name = "rtw89_8851be", + .id_table = rtw89_8851be_id_table, + .probe = rtw89_pci_probe, + .remove = rtw89_pci_remove, + .driver.pm = &rtw89_pm_ops, +}; +module_pci_driver(rtw89_8851be_driver); + +MODULE_AUTHOR("Realtek Corporation"); +MODULE_DESCRIPTION("Realtek 802.11ax wireless 8851BE driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- 2.39.2