On Mon, Jun 12, 2023 at 03:30:23PM +0200, petter@xxxxxxxxxx wrote: > Some time ago https://bugzilla.kernel.org/show_bug.cgi?id=217034 was > created. From the beginning it was just about some error printouts. > Then Andreas (who created the bug report) mentioned that it seems to > work worse after bumping the firmware to > 9.9.10. After some fixes > from Sascha the error printouts dissappeared. But when I also started > to run this using firmware > 9.9.10 I also got problems. On my i.MX8 > and RPi4 board it works fine, but on some of my less powerful boards > such as and older RPi and my i.MX6 SoloX board, it always fails using > 9.9.10 firmware. After some digging in the git log, I discovered > that HW scan offload was introduced in a later firmware. So when I > disable HW offload scan it seems to work again on all my boards. But > still I want to understand why the HW offload scan don't work for > me. Could it be that the number of CPU cores makes the difference? Can you try with maxcpus=1 on your boards with more than one CPU? I have a i.MX6s board here that I can use to try to reproduce your problem in the meantime. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
