FYI.
I sent this to Jes ages ago. The dongle in question works well as a
client. You may remove the efuse dump.
AP support apparently is still missing. It would be nice to have that
at some point.
Martin-Éric
---------- Forwarded message ---------
From: Martin-Éric Racine <martin-eric.racine@xxxxxx>
Date: Thu, Aug 20, 2020 at 5:00 PM
Subject: rtl8xxxu: untested dongle, test results
To: <jes.sorensen@xxxxxxxxx>
Hej Jes,
Kernel: Linux 5.7.10 (Debian)
Device: D-Link DWA-131 rev. E1
https://wikidevi.wi-cat.ru/D-Link_DWA-131_rev_E1
https://eu.dlink.com/uk/en/products/dwa-131-wireless-n-nano-usb-adapter
Bought this to use as an AP with hostapd, but the AP feature
apparently isn't supported yet.
See enclosed files.
Next, I tested this as a client on another host (also running kernel
5.7.10) connecting to a BGN access point. This is what I got on the
client side:
[ 87.902641] wlxc4e90a041cb2: authenticate with 24:4b:fe:3d:d0:be
[ 87.969749] wlxc4e90a041cb2: send auth to 24:4b:fe:3d:d0:be (try 1/3)
[ 87.987682] wlxc4e90a041cb2: authenticated
[ 88.045388] wlxc4e90a041cb2: associate with 24:4b:fe:3d:d0:be (try 1/3)
[ 88.093604] wlxc4e90a041cb2: RX AssocResp from 24:4b:fe:3d:d0:be
(capab=0x411 status=0 aid=4)
[ 88.219990] usb 1-3: rtl8xxxu_bss_info_changed: HT supported
[ 88.282793] wlxc4e90a041cb2: associated
[ 90.439696] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc4e90a041cb2: link
becomes ready
I hope this helps.
Cheers!
Martin-Éric
[102708.871707] usb 2-1.5: new high-speed USB device number 14 using ehci-pci
[102708.980796] usb 2-1.5: New USB device found, idVendor=2001, idProduct=3319, bcdDevice= 2.00
[102708.980799] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[102708.980800] usb 2-1.5: Product: Wireless N Nano USB Adapter
[102708.980802] usb 2-1.5: Manufacturer: Realtek
[102708.980803] usb 2-1.5: SerialNumber: 00e04c000001
[102709.027315] usb 2-1.5: This Realtek USB WiFi dongle (0x2001:0x3319) is untested!
[102709.027317] usb 2-1.5: Please report results to Jes.Sorensen@xxxxxxxxx
[102709.210668] usb 2-1.5: Vendor: Realtek
[102709.210671] usb 2-1.5: Product: Wireless N
[102709.210672] usb 2-1.5: Serial: no USB Adap
[102709.210674] usb 2-1.5: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[102709.210676] usb 2-1.5: 00: 29 81 00 7c 01 40 03 00
[102709.210678] usb 2-1.5: 08: 40 74 04 50 14 00 00 00
[102709.210679] usb 2-1.5: 10: 21 21 21 21 21 21 25 25
[102709.210681] usb 2-1.5: 18: 25 25 25 ee 0f ef ff ff
[102709.210682] usb 2-1.5: 20: ff ff ff ff ff ff ff ff
[102709.210683] usb 2-1.5: 28: ff ff ff ff ff ff ff ff
[102709.210685] usb 2-1.5: 30: ff ff ff ff ff ff ff ff
[102709.210686] usb 2-1.5: 38: ff ff 1e 1e 1e 1e 1e 1e
[102709.210687] usb 2-1.5: 40: 24 24 24 24 24 ee 0f ef
[102709.210689] usb 2-1.5: 48: ff ff ff ff ff ff ff ff
[102709.210690] usb 2-1.5: 50: ff ff ff ff ff ff ff ff
[102709.210691] usb 2-1.5: 58: ff ff ff ff ff ff ff ff
[102709.210693] usb 2-1.5: 60: ff ff ff ff ff ff ff ff
[102709.210694] usb 2-1.5: 68: ff ff ff ff ff ff ff ff
[102709.210696] usb 2-1.5: 70: ff ff ff ff ff ff ff ff
[102709.210697] usb 2-1.5: 78: ff ff ff ff ff ff ff ff
[102709.210698] usb 2-1.5: 80: ff ff ff ff ff ff ff ff
[102709.210700] usb 2-1.5: 88: ff ff ff ff ff ff ff ff
[102709.210701] usb 2-1.5: 90: ff ff ff ff ff ff ff ff
[102709.210702] usb 2-1.5: 98: ff ff ff ff ff ff ff ff
[102709.210704] usb 2-1.5: a0: ff ff ff ff ff ff ff ff
[102709.210705] usb 2-1.5: a8: ff ff ff ff ff ff ff ff
[102709.210706] usb 2-1.5: b0: ff ff ff ff ff ff ff ff
[102709.210708] usb 2-1.5: b8: 21 36 21 00 00 00 ff ff
[102709.210709] usb 2-1.5: c0: ff 01 00 10 00 00 00 ff
[102709.210710] usb 2-1.5: c8: 00 00 ff ff ff ff ff ff
[102709.210712] usb 2-1.5: d0: 01 20 19 33 e7 47 02 c4
[102709.210713] usb 2-1.5: d8: e9 0a 04 1c b2 09 03 52
[102709.210715] usb 2-1.5: e0: 65 61 6c 74 65 6b 1d 03
[102709.210716] usb 2-1.5: e8: 57 69 72 65 6c 65 73 73
[102709.210717] usb 2-1.5: f0: 20 4e 20 4e 61 6e 6f 20
[102709.210719] usb 2-1.5: f8: 55 53 42 20 41 64 61 70
[102709.210720] usb 2-1.5: 100: 74 65 72 00 ff ff ff ff
[102709.210721] usb 2-1.5: 108: ff ff ff ff ff ff ff ff
[102709.210723] usb 2-1.5: 110: ff ff ff ff ff ff ff 0d
[102709.210724] usb 2-1.5: 118: 03 00 05 00 30 00 00 00
[102709.210726] usb 2-1.5: 120: 00 93 ff ff ff ff ff ff
[102709.210727] usb 2-1.5: 128: ff ff ff ff ff ff ff ff
[102709.210728] usb 2-1.5: 130: f6 a8 98 2d 03 92 98 00
[102709.210730] usb 2-1.5: 138: fc 8c 00 11 9b 44 02 0a
[102709.210731] usb 2-1.5: 140: ff ff ff ff ff ff ff ff
[102709.210732] usb 2-1.5: 148: ff ff ff ff ff ff ff ff
[102709.210734] usb 2-1.5: 150: ff ff ff ff ff ff ff ff
[102709.210735] usb 2-1.5: 158: ff ff ff ff ff ff ff ff
[102709.210736] usb 2-1.5: 160: ff ff ff ff ff ff ff ff
[102709.210738] usb 2-1.5: 168: ff ff ff ff ff ff ff ff
[102709.210739] usb 2-1.5: 170: ff ff ff ff ff ff ff ff
[102709.210741] usb 2-1.5: 178: ff ff ff ff ff ff ff ff
[102709.210742] usb 2-1.5: 180: ff ff ff ff ff ff ff ff
[102709.210743] usb 2-1.5: 188: ff ff ff ff ff ff ff ff
[102709.210745] usb 2-1.5: 190: ff ff ff ff ff ff ff ff
[102709.210746] usb 2-1.5: 198: ff ff ff ff ff ff ff ff
[102709.210747] usb 2-1.5: 1a0: ff ff ff ff ff ff ff ff
[102709.210749] usb 2-1.5: 1a8: ff ff ff ff ff ff ff ff
[102709.210750] usb 2-1.5: 1b0: ff ff ff ff ff ff ff ff
[102709.210751] usb 2-1.5: 1b8: ff ff ff ff ff ff ff ff
[102709.210753] usb 2-1.5: 1c0: ff ff ff ff ff ff ff ff
[102709.210754] usb 2-1.5: 1c8: ff ff ff ff ff ff ff ff
[102709.210756] usb 2-1.5: 1d0: ff ff ff ff ff ff ff ff
[102709.210757] usb 2-1.5: 1d8: ff ff ff ff ff ff ff ff
[102709.210758] usb 2-1.5: 1e0: ff ff ff ff ff ff ff ff
[102709.210760] usb 2-1.5: 1e8: ff ff ff ff ff ff ff ff
[102709.210761] usb 2-1.5: 1f0: ff ff ff ff ff ff ff ff
[102709.210762] usb 2-1.5: 1f8: ff ff ff ff ff ff ff ff
[102709.210766] usb 2-1.5: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[102709.210767] usb 2-1.5: RTL8192EU MAC: c4:e9:0a:04:1c:b2
[102709.210769] usb 2-1.5: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[102709.228173] usb 2-1.5: firmware: direct-loading firmware rtlwifi/rtl8192eu_nic.bin
[102709.228179] usb 2-1.5: Firmware revision 19.0 (signature 0x92e1)
[102710.303020] usbcore: registered new interface driver rtl8xxxu
Wiphy phy4
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
RTS threshold: 2347
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CCMP-256 (00-0f-ac:10)
* GCMP-128 (00-0f-ac:8)
* GCMP-256 (00-0f-ac:9)
Available Antennas: TX 0 RX 0
Supported interface modes:
* managed
* monitor
Band 1:
Capabilities: 0x6c
HT20
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
* 2484 MHz [14] (disabled)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* set_qos_map
* set_multicast_to_unicast
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xb0 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports configuring vdev MAC-addr on create.
Supported extended features:
* [ RRM ]: RRM
* [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
28: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: Bgjr.yvYBPyLLqV5
Parent ID: FKGF.4Nx_qoDfSd7
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0
SysFS BusID: 2-1.5:1.0
Hardware Class: network
Model: "D-Link Wireless N Nano USB Adapter"
Hotplug: USB
Vendor: usb 0x2001 "D-Link"
Device: usb 0x3319 "Wireless N Nano USB Adapter"
Revision: "2.00"
Serial ID: "00e04c000001"
Driver: "rtl8xxxu"
Driver Modules: "rtl8xxxu"
Device File: wlxc4e90a041cb2
Features: WLAN
Speed: 480 Mbps
HW Address: d6:83:8f:d6:ba:ed
Permanent HW Address: c4:e9:0a:04:1c:b2
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v2001p3319d0200dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rtl8xxxu is active
Driver Activation Cmd: "modprobe rtl8xxxu"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #29 (Hub)
