Search Linux Wireless

[PATCH] ath9k: Fix possible stall on ath9k_txq_list_has_key()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On EDMA capable hardware, ath9k_txq_list_has_key() can enter infinite
loop if it is called while all txq_fifos have packets that use different
key that the one we are looking for. Fix it by exiting the loop if all
txq_fifos have been checked already.

Because this loop is called under spin_lock_bh() (see ath_txq_lock) it
causes the following rcu stall:

rcu: INFO: rcu_sched self-detected stall on CPU
ath10k_pci 0000:01:00.0: failed to read temperature -11
rcu:    1-....: (5254 ticks this GP) idle=189/1/0x4000000000000002 softirq=8442983/8442984 fqs=2579
        (t=5257 jiffies g=17983297 q=334)
Task dump for CPU 1:
task:hostapd         state:R  running task     stack:    0 pid:  297 ppid:   289 flags:0x0000000a
Call trace:
 dump_backtrace+0x0/0x170
 show_stack+0x1c/0x24
 sched_show_task+0x140/0x170
 dump_cpu_task+0x48/0x54
 rcu_dump_cpu_stacks+0xf0/0x134
 rcu_sched_clock_irq+0x8d8/0x9fc
 update_process_times+0xa0/0xec
 tick_sched_timer+0x5c/0xd0
 __hrtimer_run_queues+0x154/0x320
 hrtimer_interrupt+0x120/0x2f0
 arch_timer_handler_virt+0x38/0x44
 handle_percpu_devid_irq+0x9c/0x1e0
 handle_domain_irq+0x64/0x90
 gic_handle_irq+0x78/0xb0
 call_on_irq_stack+0x28/0x38
 do_interrupt_handler+0x54/0x5c
 el1_interrupt+0x2c/0x4c
 el1h_64_irq_handler+0x14/0x1c
 el1h_64_irq+0x74/0x78
 ath9k_txq_has_key+0x1bc/0x250 [ath9k]
 ath9k_set_key+0x1cc/0x3dc [ath9k]
 drv_set_key+0x78/0x170
 ieee80211_key_replace+0x564/0x6cc
 ieee80211_key_link+0x174/0x220
 ieee80211_add_key+0x11c/0x300
 nl80211_new_key+0x12c/0x330
 genl_family_rcv_msg_doit+0xbc/0x11c
 genl_rcv_msg+0xd8/0x1c4
 netlink_rcv_skb+0x40/0x100
 genl_rcv+0x3c/0x50
 netlink_unicast+0x1ec/0x2c0
 netlink_sendmsg+0x198/0x3c0
 ____sys_sendmsg+0x210/0x250
 ___sys_sendmsg+0x78/0xc4
 __sys_sendmsg+0x4c/0x90
 __arm64_sys_sendmsg+0x28/0x30
 invoke_syscall.constprop.0+0x60/0x100
 do_el0_svc+0x48/0xd0
 el0_svc+0x14/0x50
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x158/0x15c

This rcu stall is hard to reproduce as is, but changing ATH_TXFIFO_DEPTH
from 8 to 2 makes it reasonably easy to reproduce.

Fixes: ca2848022c12 ("ath9k: Postpone key cache entry deletion for TXQ frames reference it")
Signed-off-by: Remi Pommarel <repk@xxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a4197c14f0a9..7f9f06ea8a05 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -850,7 +850,7 @@ static bool ath9k_txq_list_has_key(struct list_head *txq_list, u32 keyix)
 static bool ath9k_txq_has_key(struct ath_softc *sc, u32 keyix)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	int i;
+	int i, j;
 	struct ath_txq *txq;
 	bool key_in_use = false;
 
@@ -868,8 +868,9 @@ static bool ath9k_txq_has_key(struct ath_softc *sc, u32 keyix)
 		if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 			int idx = txq->txq_tailidx;
 
-			while (!key_in_use &&
-			       !list_empty(&txq->txq_fifo[idx])) {
+			for (j = 0; !key_in_use &&
+			     !list_empty(&txq->txq_fifo[idx]) &&
+			     j < ATH_TXFIFO_DEPTH; j++) {
 				key_in_use = ath9k_txq_list_has_key(
 					&txq->txq_fifo[idx], keyix);
 				INCR(idx, ATH_TXFIFO_DEPTH);
-- 
2.40.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux